[U-Boot] [PATCH V2 0/8] SPL Linux boot

[Simon Schwarz]

Adds direct Linux boot to SPL. It implements a savebp command to save  
ATAGS or FDT to NAND flash. The kernel image has to be in place for this! 
 
checkpatch whines about not using strict_strtoull - since this is not  
available - I can't change this. 
 
V2 changes: 
FIX FDT creation 
ADD Readme 
 
based on: 
- The new SPL layout 
- OMAP3 new SPL layout 
  (http://article.gmane.org/gmane.comp.boot-loaders.u-boot/105260) 
 
Related to: 
- http://article.gmane.org/gmane.comp.boot-loaders.u-boot/102669 

Simon Schwarz (8):
  arm: Add Prep subcommand support to bootm
  Add savebp command
  arm: Add savebp implementation for arm
  omap-common/spl: Add linux boot to SPL
  devkit8000/spl: init GPMC for dm9000 in SPL
  omap-common: Add NAND SPL linux booting
  omap-common: fixes BSS overwriting problem
  savebp: added Readme

 arch/arm/cpu/armv7/omap-common/spl.c      |   49 +++++++++-
 arch/arm/cpu/armv7/omap-common/spl_nand.c |   63 +++++++++---
 arch/arm/include/asm/omap_common.h        |    2 +
 arch/arm/include/asm/savebp.h             |   27 +++++
 arch/arm/lib/Makefile                     |    1 +
 arch/arm/lib/bootm.c                      |  116 ++++++++++++----------
 arch/arm/lib/savebp.c                     |   91 ++++++++++++++++++
 board/timll/devkit8000/devkit8000.c       |   33 +++++--
 common/Makefile                           |    1 +
 common/cmd_bootm.c                        |    2 +-
 common/cmd_savebp.c                       |  149 +++++++++++++++++++++++++++++
 doc/README.commands.savebp                |   28 ++++++
 include/command.h                         |    5 +
 include/configs/devkit8000.h              |   14 +++-
 14 files changed, 499 insertions(+), 82 deletions(-)
 create mode 100644 arch/arm/include/asm/savebp.h
 create mode 100644 arch/arm/lib/savebp.c
 create mode 100644 common/cmd_savebp.c
 create mode 100644 doc/README.commands.savebp

-- 
1.7.4.1