[U-Boot] [PATCH V2 5/8] devkit8000/spl: init GPMC for dm9000 in SPL

Simon Schwarz simonschwarzcor at googlemail.com
Wed Aug 24 12:39:20 CEST 2011


Linux crashes if the GPMC isn't configured for the dm9000.

Signed-off-by: Simon Schwarz <simonschwarzcor at gmail.com>
---

V2 changes:
nothing
---
 arch/arm/cpu/armv7/omap-common/spl.c |    1 +
 arch/arm/include/asm/omap_common.h   |    2 ++
 board/timll/devkit8000/devkit8000.c  |   33 ++++++++++++++++++++++++---------
 3 files changed, 27 insertions(+), 9 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index 9c22c7a..0c38bbb 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -175,6 +175,7 @@ void board_init_r(gd_t *id, ulong dummy)
 #ifdef CONFIG_SPL_OS_BOOT
 	case IH_OS_LINUX:
 		debug("Jumping to Linux\n");
+		spl_board_prepare_for_linux();
 		jump_to_image_linux((void *)CONFIG_SYS_SPL_ARGS_ADDR);
 		break;
 #endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 015cede..0906f49 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -77,6 +77,8 @@ u32 omap_boot_mode(void);
 
 /* SPL common function s*/
 void spl_parse_image_header(const struct image_header *header);
+int spl_uboot_key(void);
+void spl_board_prepare_for_linux(void);
 
 /* NAND SPL functions */
 void spl_nand_load_image(void);
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 9b53742..3dd0eeb 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -62,6 +62,18 @@ int board_init(void)
 	return 0;
 }
 
+/* Configure GPMC registers for DM9000 */
+static void gpmc_dm9000_config(void)
+{
+	writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[6].config1);
+	writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[6].config2);
+	writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[6].config3);
+	writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[6].config4);
+	writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[6].config5);
+	writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[6].config6);
+	writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[6].config7);
+}
+
 /*
  * Routine: misc_init_r
  * Description: Configure board specific parts
@@ -80,14 +92,7 @@ int misc_init_r(void)
 #endif
 
 #ifdef CONFIG_DRIVER_DM9000
-	/* Configure GPMC registers for DM9000 */
-	writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[6].config1);
-	writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[6].config2);
-	writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[6].config3);
-	writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[6].config4);
-	writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[6].config5);
-	writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[6].config6);
-	writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[6].config7);
+	gpmc_dm9000_config();
 
 	/* Use OMAP DIE_ID as MAC address */
 	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
@@ -119,7 +124,7 @@ void set_muxconf_regs(void)
 	MUX_DEVKIT8000();
 }
 
-#if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_SPL_BUILD)
+#ifdef CONFIG_DRIVER_DM9000
 /*
  * Routine: board_eth_init
  * Description: Setting up the Ethernet hardware.
@@ -129,3 +134,13 @@ int board_eth_init(bd_t *bis)
 	return dm9000_initialize(bis);
 }
 #endif
+
+#ifdef CONFIG_SPL_OS_BOOT
+/* do board specific preperation before SPL
+ * Linux boot */
+void spl_board_prepare_for_linux(void)
+{
+	gpmc_dm9000_config();
+}
+
+#endif
-- 
1.7.4.1



More information about the U-Boot mailing list