[U-Boot] [PATCH 1/1] mmc: omap: config VMMC, MMC1_PBIAS

Balaji T K balajitk at ti.com
Thu Aug 25 16:48:25 CEST 2011


Config VMMC voltage to 3V for MMC/SD card slot
and PBIAS settings needed for OMAP4
Fixes MMC/SD detection on boot from eMMC.

Signed-off-by: Balaji T K <balajitk at ti.com>
Signed-off-by: Aneesh V <aneesh at ti.com>
---
 arch/arm/include/asm/arch-omap4/omap4.h |    1 +
 drivers/mmc/omap_hsmmc.c                |   28 +++++++++++++++++++++++++---
 drivers/power/twl6030.c                 |    7 +++++++
 include/configs/omap4_sdp4430.h         |    2 ++
 include/twl6030.h                       |    3 +++
 5 files changed, 38 insertions(+), 3 deletions(-)

diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index 9aad0e6..13fc8c9 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -55,6 +55,7 @@
 #define LPDDR2_IO_REGS_BASE	0x4A100638
 
 #define CONTROL_EFUSE_2		0x4A100704
+#define CONTROL_PBIASLITE	0x4A100600
 
 /* CONTROL_ID_CODE */
 #define CONTROL_ID_CODE		0x4A002204
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 6627905..95bb661 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -28,6 +28,7 @@
 #include <part.h>
 #include <i2c.h>
 #include <twl4030.h>
+#include <twl6030.h>
 #include <asm/io.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sys_proto.h>
@@ -38,7 +39,24 @@
 static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size);
 static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int siz);
 static struct mmc hsmmc_dev[2];
-unsigned char mmc_board_init(hsmmc_t *mmc_base)
+
+#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
+static void omap4_vmmc_pbias_config(struct mmc *mmc)
+{
+	u32 value = 0;
+
+	value = readl(CONTROL_PBIASLITE);
+	value &= ~((1 << 22) | (1 << 26));
+	writel(value, CONTROL_PBIASLITE);
+	/* set VMMC to 3V */
+	twl6030_power_mmc_init();
+	value = readl(CONTROL_PBIASLITE);
+	value |= (1 << 21) | (1 << 22) | (1 << 26);
+	writel(value, CONTROL_PBIASLITE);
+}
+#endif
+
+unsigned char mmc_board_init(struct mmc *mmc)
 {
 #if defined(CONFIG_TWL4030_POWER)
 	twl4030_power_mmc_init();
@@ -67,7 +85,11 @@ unsigned char mmc_board_init(hsmmc_t *mmc_base)
 		&prcm_base->iclken1_core);
 #endif
 
-/* TODO add appropriate OMAP4 init - none currently necessary */
+#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
+	/* PBIAS config needed for MMC1 only */
+	if (mmc->block_dev.dev == 0)
+		omap4_vmmc_pbias_config(mmc);
+#endif
 
 	return 0;
 }
@@ -108,7 +130,7 @@ static int mmc_init_setup(struct mmc *mmc)
 	unsigned int dsor;
 	ulong start;
 
-	mmc_board_init(mmc_base);
+	mmc_board_init(mmc);
 
 	writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET,
 		&mmc_base->sysconfig);
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index fef57b4..c5a0038 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -182,6 +182,13 @@ void twl6030_init_battery_charging(void)
 	return;
 }
 
+void twl6030_power_mmc_init()
+{
+	/* set voltage to 3.0 and turnon for APP */
+	twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x15, VMMC_CFG_VOLTATE);
+	twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VMMC_CFG_STATE);
+}
+
 void twl6030_usb_device_settings()
 {
 	u8 data = 0;
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 5b3110c..50797ab 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -98,8 +98,10 @@
 #define CONFIG_I2C_MULTI_BUS		1
 
 /* TWL6030 */
+#ifndef CONFIG_SPL_BUILD
 #define CONFIG_TWL6030_POWER		1
 #define CONFIG_CMD_BAT			1
+#endif
 
 /* MMC */
 #define CONFIG_GENERIC_MMC		1
diff --git a/include/twl6030.h b/include/twl6030.h
index 6ed68a0..a9fcadb 100644
--- a/include/twl6030.h
+++ b/include/twl6030.h
@@ -33,6 +33,8 @@
 #define TWL6030_CHIP_PWM	0x49
 
 /* Slave Address 0x48 */
+#define VMMC_CFG_STATE		0x9A
+#define VMMC_CFG_VOLTATE	0x9B
 #define VUSB_CFG_STATE		0xA2
 
 #define MISC1			0xE4
@@ -130,3 +132,4 @@ void twl6030_start_usb_charging(void);
 void twl6030_stop_usb_charging(void);
 int twl6030_get_battery_voltage(void);
 int twl6030_get_battery_current(void);
+void twl6030_power_mmc_init(void);
-- 
1.7.0.4



More information about the U-Boot mailing list