[U-Boot] Pull request: u-boot-sh

[Wolfgang Denk]

Dear Nobuhiro Iwamatsu,

In message <CABMQnVK-vc3v-=z-bnkcwd2m4oZYfbo3s80Y1ygrREiSpCXRWw at mail.gmail.com> you wrote:
> 
> are available in the git repository at:
>   git://git.denx.de/u-boot-sh.git master
> 
> Nobuhiro Iwamatsu (2):
>       sh: sh2a: Add sh2a optimize to config.mk
>       usb: r8a66597: Fix argument mistake of inl
> 
> Phil Edworthy (4):
>       sh: Add Renesas rsk7264 board
>       sh: Add support for SH2A freestanding build
>       sh: Fix rsk7203 alignment problem
>       sh: Clean up rsk7264 board settings
> 
> Yoshihiro Shimoda (2):
>       sh: sh7757lcr: Add KEEP order to start.o section
>       sh: add calling mmc_initialize in board.c
> 
>  MAINTAINERS                           |    4 +
>  arch/sh/cpu/sh2/config.mk             |    5 +
>  arch/sh/cpu/sh2/cpu.c                 |    7 +
>  arch/sh/include/asm/cpu_sh2.h         |    2 +
>  arch/sh/include/asm/cpu_sh7264.h      |   41 ++++++
>  arch/sh/lib/Makefile                  |   22 +++
>  arch/sh/lib/ashiftlt.S                |  192 ++++++++++++++++++++++++++
>  arch/sh/lib/ashiftrt.S                |  149 ++++++++++++++++++++
>  arch/sh/lib/ashldi3.c                 |   25 ++++
>  arch/sh/lib/board.c                   |   12 ++
>  arch/sh/lib/libgcc.h                  |   25 ++++
>  arch/sh/lib/lshiftrt.S                |  192 ++++++++++++++++++++++++++
>  arch/sh/lib/lshrdi3.c                 |   25 ++++
>  arch/sh/lib/movmem.S                  |  238 +++++++++++++++++++++++++++++=
> ++++
>  board/renesas/rsk7203/lowlevel_init.S |    1 +
>  board/renesas/rsk7264/Makefile        |   32 +++++
>  board/renesas/rsk7264/lowlevel_init.S |  212 +++++++++++++++++++++++++++++
>  board/renesas/rsk7264/rsk7264.c       |   72 ++++++++++
>  board/renesas/sh7757lcr/u-boot.lds    |    2 +-
>  boards.cfg                            |    1 +
>  drivers/serial/serial_sh.h            |    5 +-
>  drivers/usb/host/r8a66597.h           |    2 +-
>  include/configs/rsk7264.h             |   78 +++++++++++
>  23 files changed, 1341 insertions(+), 3 deletions(-)
>  create mode 100644 arch/sh/include/asm/cpu_sh7264.h
>  create mode 100644 arch/sh/lib/ashiftlt.S
>  create mode 100644 arch/sh/lib/ashiftrt.S
>  create mode 100644 arch/sh/lib/ashldi3.c
>  create mode 100644 arch/sh/lib/libgcc.h
>  create mode 100644 arch/sh/lib/lshiftrt.S
>  create mode 100644 arch/sh/lib/lshrdi3.c
>  create mode 100644 arch/sh/lib/movmem.S
>  create mode 100644 board/renesas/rsk7264/Makefile
>  create mode 100644 board/renesas/rsk7264/lowlevel_init.S
>  create mode 100644 board/renesas/rsk7264/rsk7264.c
>  create mode 100644 include/configs/rsk7264.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"If people are good only because they fear punishment, and  hope  for
reward, then we are a sorry lot indeed."            - Albert Einstein