[U-Boot] [PATCH v2] beagleboard: enable HUB power on all variants of the BeagleBoard
Kridner, Jason
jdk at ti.com
Sun Aug 28 02:41:11 CEST 2011
On Aug 27, 2011, at 12:19 PM, "Joel A Fernandes" <agnel.joel at gmail.com> wrote:
> From: Christian Spielberger <c.spielberger at bct-electronic.com>
>
> Changes made by Jason Kridner with inputs from Eric Benard to special case xM Rev A and xM Rev B
>
> Signed-off-by: Joel A Fernandes <joelagnel at ti.com>
> Cc: Eric Benard <eric at eukrea.com>
> Cc: Christian Spielberger <c.spielberger at bct-electronic.com>
> Cc: Jason Kridner <jdk at ti.com>
Acked-by: Jason Kridner <jdk at ti.com>
> ---
> Previous discussions:
> http://www.mail-archive.com/u-boot@lists.denx.de/msg59361.html
> http://www.mail-archive.com/u-boot@lists.denx.de/msg59589.html
>
> board/ti/beagle/beagle.c | 10 +++++++++-
> 1 files changed, 9 insertions(+), 1 deletions(-)
>
> diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
> index 13fe39b..e07f1b8 100644
> --- a/board/ti/beagle/beagle.c
> +++ b/board/ti/beagle/beagle.c
> @@ -332,7 +332,15 @@ int misc_init_r(void)
> setenv(expansion_config.env_var, expansion_config.env_setting);
>
> twl4030_power_init();
> - twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
> + switch (get_board_revision()) {
> + case REVISION_XM_A:
> + case REVISION_XM_B:
> + twl4030_led_init(TWL4030_LED_LEDEN_LEDBON);
> + break;
> + default:
> + twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
> + break;
> + }
>
> /* Set GPIO states before they are made outputs */
> writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
> --
> 1.7.1
>
More information about the U-Boot
mailing list