[U-Boot] [PATCH 2/2 v4] powerpc/p1023rds: Disable nor flash node and enable nand flash node

[Chunhe Lan]

In the p1023rds, accessing exclusively nor flash or nand flash device by
BR0/OR0.

Default device tree nor and nand node should have the following structure:

	Example:

		nor_flash: nor at 0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x02000000>;
			bank-width = <2>;
			device-width = <1>;

			partition at 0 {
				label = "ramdisk";
				reg = <0x00000000 0x01c00000>;
			};
		}

		nand_flash: nand at 1,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,p1023-fcm-nand",
				     "fsl,elbc-fcm-nand";
			reg = <0x2 0x0 0x00040000>;
			status = "disabled";

			u-boot-nand at 0 {
				/* This location must not be altered  */
				/* 1MB for u-boot Bootloader Image */
				reg = <0x0 0x00100000>;
				read-only;
			};
		}

When booting from nor flash, the status of nor node is null that means it
is enabled and the status of nand node is disabled in the default dts file,
so do not do anything.

But, when booting from nand flash, need to do some operations:

	o the status of nor node should be disabled.
	o the status of nand node should be enabled.

Signed-off-by: Chunhe Lan <Chunhe.Lan at freescale.com>
---
 board/freescale/p1023rds/p1023rds.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c
index 8cfd199..c99ccee 100644
--- a/board/freescale/p1023rds/p1023rds.c
+++ b/board/freescale/p1023rds/p1023rds.c
@@ -158,5 +158,10 @@ void ft_board_setup(void *blob, bd_t *bd)
 	size = getenv_bootm_size();
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_NAND_U_BOOT
+	do_fixup_by_path_string(fdt, "nor_flash", "status", "disabled");
+	do_fixup_by_path_string(fdt, "nand_flash", "status", "okay");
+#endif
 }
 #endif
-- 
1.5.6.5