[U-Boot] [PATCH][V3] drivers: add the support for Silicon Image SATA controller

b29983 at freescale.com b29983 at freescale.com
Tue Aug 30 08:34:36 CEST 2011


From: Tang Yuantian <B29983 at freescale.com>

Add the Silicon Image series PCI Express to
Serial ATA controller support, including Sil3132,
Sil3131 and Sil3124.
The SATA controller can be used to load kernel.

The features list:
	- Supports 1-lane 2.5 Gbit/s PCI Express
	- Supports one/two/four independent Serial ATA channels
	- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s
	- Supports LBA28 and LBA48

Signed-off-by: Tang Yuantian <b29983 at freescale.com>
Signed-off-by: Aaron Williams <Aaron.Williams at cavium.com>
Tested-by: Lan Chunhe <b25806 at freescale.com>
---
git tree: git://git.denx.de/u-boot.git
branch: master
Test platform:P1022DS, P4080DS
V3: 
	- remove __IOMEM
	- remove force cast
V2:
	- add virt_to_bus to translate address
	- fix some issues

 drivers/block/Makefile   |    1 +
 drivers/block/sata_sil.c |  723 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/block/sata_sil.h |  227 +++++++++++++++
 include/pci_ids.h        |    5 +
 4 files changed, 956 insertions(+), 0 deletions(-)
 create mode 100644 drivers/block/sata_sil.c
 create mode 100644 drivers/block/sata_sil.h

diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 2efe981..98560ef 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -36,6 +36,7 @@ COBJS-$(CONFIG_MX51_PATA) += mxc_ata.o
 COBJS-$(CONFIG_PATA_BFIN) += pata_bfin.o
 COBJS-$(CONFIG_SATA_DWC) += sata_dwc.o
 COBJS-$(CONFIG_SATA_SIL3114) += sata_sil3114.o
+COBJS-$(CONFIG_SATA_SIL) += sata_sil.o
 COBJS-$(CONFIG_IDE_SIL680) += sil680.o
 COBJS-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
 COBJS-$(CONFIG_SYSTEMACE) += systemace.o
diff --git a/drivers/block/sata_sil.c b/drivers/block/sata_sil.c
new file mode 100644
index 0000000..9ee4adf
--- /dev/null
+++ b/drivers/block/sata_sil.c
@@ -0,0 +1,723 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Tang Yuantian <b29983 at freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <command.h>
+#include <asm/byteorder.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <fis.h>
+#include <libata.h>
+#include "sata_sil.h"
+
+/* Convert sectorsize to wordsize */
+#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2)
+#define mdelay(n)   udelay((n)*1000)
+#define virt_to_bus(devno, v)	pci_virt_to_mem(devno, (void *) (v))
+
+static struct sata_info sata_info;
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
+
+static struct pci_device_id supported[] = {
+	{PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3131},
+	{PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3132},
+	{PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3124},
+	{}
+};
+
+static void sil_sata_dump_fis(struct sata_fis_d2h *s)
+{
+	printf("Status FIS dump:\n");
+	printf("fis_type:		%02x\n", s->fis_type);
+	printf("pm_port_i:		%02x\n", s->pm_port_i);
+	printf("status:			%02x\n", s->status);
+	printf("error:			%02x\n", s->error);
+	printf("lba_low:		%02x\n", s->lba_low);
+	printf("lba_mid:		%02x\n", s->lba_mid);
+	printf("lba_high:		%02x\n", s->lba_high);
+	printf("device:			%02x\n", s->device);
+	printf("lba_low_exp:		%02x\n", s->lba_low_exp);
+	printf("lba_mid_exp:		%02x\n", s->lba_mid_exp);
+	printf("lba_high_exp:		%02x\n", s->lba_high_exp);
+	printf("res1:			%02x\n", s->res1);
+	printf("sector_count:		%02x\n", s->sector_count);
+	printf("sector_count_exp:	%02x\n", s->sector_count_exp);
+}
+
+static const char *sata_spd_string(unsigned int speed)
+{
+	static const char * const spd_str[] = {
+		"1.5 Gbps",
+		"3.0 Gbps",
+		"6.0 Gbps",
+	};
+
+	if ((speed - 1) > 2)
+		return "<unknown>";
+
+	return spd_str[speed - 1];
+}
+
+static u32 ata_wait_register(void *reg, u32 mask,
+			 u32 val, int timeout_msec)
+{
+	u32 tmp;
+
+	tmp = readl(reg);
+	while ((tmp & mask) == val && timeout_msec > 0) {
+		mdelay(1);
+		timeout_msec--;
+		tmp = readl(reg);
+	}
+
+	return tmp;
+}
+
+static void sil_config_port(void *port)
+{
+	/* configure IRQ WoC */
+	writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+
+	/* zero error counters. */
+	writew(0x8000, port + PORT_DECODE_ERR_THRESH);
+	writew(0x8000, port + PORT_CRC_ERR_THRESH);
+	writew(0x8000, port + PORT_HSHK_ERR_THRESH);
+	writew(0x0000, port + PORT_DECODE_ERR_CNT);
+	writew(0x0000, port + PORT_CRC_ERR_CNT);
+	writew(0x0000, port + PORT_HSHK_ERR_CNT);
+
+	/* always use 64bit activation */
+	writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
+
+	/* clear port multiplier enable and resume bits */
+	writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
+}
+
+static int sil_init_port(void *port)
+{
+	u32 tmp;
+
+	writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
+	ata_wait_register(port + PORT_CTRL_STAT,
+			  PORT_CS_INIT, PORT_CS_INIT, 100);
+	tmp = ata_wait_register(port + PORT_CTRL_STAT,
+				PORT_CS_RDY, 0, 100);
+
+	if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY)
+		return 1;
+
+	return 0;
+}
+
+static void sil_read_fis(int dev, int tag, struct sata_fis_d2h *fis)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+	void *port = sata->port;
+	struct sil_prb *prb;
+	int i;
+	u32 *src, *dst;
+
+	prb = port + PORT_LRAM + tag * PORT_LRAM_SLOT_SZ;
+	src = (u32 *)&prb->fis;
+	dst = (u32 *)fis;
+	for (i = 0; i < sizeof(struct sata_fis_h2d); i += 4)
+		*dst++ = readl(src++);
+}
+
+static int sil_exec_cmd(int dev, struct sil_cmd_block *pcmd, int tag)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+	void *port = sata->port;
+	u64 paddr = virt_to_bus(sata->devno, pcmd);
+	u32 irq_mask, irq_stat;
+	int rc;
+
+	writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
+
+	/* better to add momery barrior here */
+	writel((u32)paddr, port + PORT_CMD_ACTIVATE + tag * 8);
+	writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + tag * 8 + 4);
+
+	irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
+	irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask,
+			0, 10000);
+
+	/* clear IRQs */
+	writel(irq_mask, port + PORT_IRQ_STAT);
+	irq_stat >>= PORT_IRQ_RAW_SHIFT;
+
+	if (irq_stat & PORT_IRQ_COMPLETE)
+		rc = 0;
+	else {
+		/* force port into known state */
+		sil_init_port(port);
+		if (irq_stat & PORT_IRQ_ERROR)
+			rc = 1; /* error */
+		else
+			rc = 2; /* busy */
+	}
+
+	return rc;
+}
+
+static int sil_cmd_set_feature(int dev)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+	struct sil_cmd_block cmdb, *pcmd = &cmdb;
+	struct sata_fis_d2h fis;
+	u8 udma_cap;
+	int ret;
+
+	memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block));
+	pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	pcmd->prb.fis.pm_port_c = (1 << 7);
+	pcmd->prb.fis.command = ATA_CMD_SET_FEATURES;
+	pcmd->prb.fis.features = SETFEATURES_XFER;
+
+	/* First check the device capablity */
+	udma_cap = (u8)(sata->udma & 0xff);
+	debug("udma_cap %02x\n", udma_cap);
+
+	if (udma_cap == ATA_UDMA6)
+		pcmd->prb.fis.sector_count = XFER_UDMA_6;
+	if (udma_cap == ATA_UDMA5)
+		pcmd->prb.fis.sector_count = XFER_UDMA_5;
+	if (udma_cap == ATA_UDMA4)
+		pcmd->prb.fis.sector_count = XFER_UDMA_4;
+	if (udma_cap == ATA_UDMA3)
+		pcmd->prb.fis.sector_count = XFER_UDMA_3;
+
+	ret = sil_exec_cmd(dev, pcmd, 0);
+	if (ret) {
+		sil_read_fis(dev, 0, &fis);
+		printf("Err: exe cmd(0x%x).\n",
+				readl(sata->port + PORT_SERROR));
+		sil_sata_dump_fis(&fis);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int sil_cmd_identify_device(int dev, u16 *id)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+	struct sil_cmd_block cmdb, *pcmd = &cmdb;
+	struct sata_fis_d2h fis;
+	int ret;
+
+	memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block));
+	pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL);
+	pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ);
+	pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	pcmd->prb.fis.pm_port_c = (1 << 7);
+	pcmd->prb.fis.command = ATA_CMD_ID_ATA;
+	pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, id));
+	pcmd->sge.cnt = cpu_to_le32(sizeof(id[0]) * ATA_ID_WORDS);
+	pcmd->sge.flags = cpu_to_le32(SGE_TRM);
+
+	ret = sil_exec_cmd(dev, pcmd, 0);
+	if (ret) {
+		sil_read_fis(dev, 0, &fis);
+		printf("Err: id cmd(0x%x).\n", readl(sata->port + PORT_SERROR));
+		sil_sata_dump_fis(&fis);
+		return 1;
+	}
+	ata_swap_buf_le16(id, ATA_ID_WORDS);
+
+	return 0;
+}
+
+static int sil_cmd_soft_reset(int dev)
+{
+	struct sil_cmd_block cmdb, *pcmd = &cmdb;
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+	struct sata_fis_d2h fis;
+	void *port = sata->port;
+	int ret;
+
+	/* put the port into known state */
+	if (sil_init_port(port)) {
+		printf("SRST: port %d not ready\n", dev);
+		return 1;
+	}
+
+	memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block));
+
+	pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_SRST);
+	pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	pcmd->prb.fis.pm_port_c = 0xf;
+
+	ret = sil_exec_cmd(dev, &cmdb, 0);
+	if (ret) {
+		sil_read_fis(dev, 0, &fis);
+		printf("SRST cmd error.\n");
+		sil_sata_dump_fis(&fis);
+		return 1;
+	}
+
+	return 0;
+}
+
+static ulong sil_sata_rw_cmd(int dev, ulong start, ulong blkcnt,
+		u8 *buffer, int is_write)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+	struct sil_cmd_block cmdb, *pcmd = &cmdb;
+	struct sata_fis_d2h fis;
+	u64 block;
+	int ret;
+
+	block = (u64)start;
+	memset(pcmd, 0, sizeof(struct sil_cmd_block));
+	pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL);
+	pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	pcmd->prb.fis.pm_port_c = (1 << 7);
+	if (is_write) {
+		pcmd->prb.fis.command = ATA_CMD_WRITE;
+		pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE);
+	} else {
+		pcmd->prb.fis.command = ATA_CMD_READ;
+		pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ);
+	}
+
+	pcmd->prb.fis.device = ATA_LBA;
+	pcmd->prb.fis.device |= (block >> 24) & 0xf;
+	pcmd->prb.fis.lba_high = (block >> 16) & 0xff;
+	pcmd->prb.fis.lba_mid = (block >> 8) & 0xff;
+	pcmd->prb.fis.lba_low = block & 0xff;
+	pcmd->prb.fis.sector_count = (u8)blkcnt & 0xff;
+
+	pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer));
+	pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE);
+	pcmd->sge.flags = cpu_to_le32(SGE_TRM);
+
+	ret = sil_exec_cmd(dev, pcmd, 0);
+	if (ret) {
+		sil_read_fis(dev, 0, &fis);
+		printf("Err: rw cmd(0x%08x).\n",
+				readl(sata->port + PORT_SERROR));
+		sil_sata_dump_fis(&fis);
+		return 1;
+	}
+
+	return blkcnt;
+}
+
+static ulong sil_sata_rw_cmd_ext(int dev, ulong start, ulong blkcnt,
+		u8 *buffer, int is_write)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+	struct sil_cmd_block cmdb, *pcmd = &cmdb;
+	struct sata_fis_d2h fis;
+	u64 block;
+	int ret;
+
+	block = (u64)start;
+	memset(pcmd, 0, sizeof(struct sil_cmd_block));
+	pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL);
+	pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	pcmd->prb.fis.pm_port_c = (1 << 7);
+	if (is_write) {
+		pcmd->prb.fis.command = ATA_CMD_WRITE_EXT;
+		pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE);
+	} else {
+		pcmd->prb.fis.command = ATA_CMD_READ_EXT;
+		pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ);
+	}
+
+	pcmd->prb.fis.lba_high_exp = (block >> 40) & 0xff;
+	pcmd->prb.fis.lba_mid_exp = (block >> 32) & 0xff;
+	pcmd->prb.fis.lba_low_exp = (block >> 24) & 0xff;
+	pcmd->prb.fis.lba_high = (block >> 16) & 0xff;
+	pcmd->prb.fis.lba_mid = (block >> 8) & 0xff;
+	pcmd->prb.fis.lba_low = block & 0xff;
+	pcmd->prb.fis.device = ATA_LBA;
+	pcmd->prb.fis.sector_count_exp = (blkcnt >> 8) & 0xff;
+	pcmd->prb.fis.sector_count = blkcnt & 0xff;
+
+	pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer));
+	pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE);
+	pcmd->sge.flags = cpu_to_le32(SGE_TRM);
+
+	ret = sil_exec_cmd(dev, pcmd, 0);
+	if (ret) {
+		sil_read_fis(dev, 0, &fis);
+		printf("Err: rw ext cmd(0x%08x).\n",
+				readl(sata->port + PORT_SERROR));
+		sil_sata_dump_fis(&fis);
+		return 1;
+	}
+
+	return blkcnt;
+}
+
+ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt,
+		void *buffer, int is_write)
+{
+	ulong start, blks, max_blks;
+	u8 *addr;
+
+	start = blknr;
+	blks = blkcnt;
+	addr = (u8 *)buffer;
+
+	max_blks = ATA_MAX_SECTORS;
+	do {
+		if (blks > max_blks) {
+			sil_sata_rw_cmd(dev, start, max_blks, addr, is_write);
+			start += max_blks;
+			blks -= max_blks;
+			addr += ATA_SECT_SIZE * max_blks;
+		} else {
+			sil_sata_rw_cmd(dev, start, blks, addr, is_write);
+			start += blks;
+			blks = 0;
+			addr += ATA_SECT_SIZE * blks;
+		}
+	} while (blks != 0);
+
+	return blkcnt;
+}
+
+ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt,
+		void *buffer, int is_write)
+{
+	ulong start, blks, max_blks;
+	u8 *addr;
+
+	start = blknr;
+	blks = blkcnt;
+	addr = (u8 *)buffer;
+
+	max_blks = ATA_MAX_SECTORS_LBA48;
+	do {
+		if (blks > max_blks) {
+			sil_sata_rw_cmd_ext(dev, start, max_blks,
+					addr, is_write);
+			start += max_blks;
+			blks -= max_blks;
+			addr += ATA_SECT_SIZE * max_blks;
+		} else {
+			sil_sata_rw_cmd_ext(dev, start, blks,
+					addr, is_write);
+			start += blks;
+			blks = 0;
+			addr += ATA_SECT_SIZE * blks;
+		}
+	} while (blks != 0);
+
+	return blkcnt;
+}
+
+void sil_sata_cmd_flush_cache(int dev)
+{
+	struct sil_cmd_block cmdb, *pcmd = &cmdb;
+
+	memset((void *)pcmd, 0, sizeof(struct sil_cmd_block));
+	pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	pcmd->prb.fis.pm_port_c = (1 << 7);
+	pcmd->prb.fis.command = ATA_CMD_FLUSH;
+
+	sil_exec_cmd(dev, pcmd, 0);
+}
+
+void sil_sata_cmd_flush_cache_ext(int dev)
+{
+	struct sil_cmd_block cmdb, *pcmd = &cmdb;
+
+	memset((void *)pcmd, 0, sizeof(struct sil_cmd_block));
+	pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+	pcmd->prb.fis.pm_port_c = (1 << 7);
+	pcmd->prb.fis.command = ATA_CMD_FLUSH_EXT;
+
+	sil_exec_cmd(dev, pcmd, 0);
+}
+
+static void sil_sata_init_wcache(int dev, u16 *id)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+
+	if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
+		sata->wcache = 1;
+	if (ata_id_has_flush(id))
+		sata->flush = 1;
+	if (ata_id_has_flush_ext(id))
+		sata->flush_ext = 1;
+}
+
+static int sil_sata_get_wcache(int dev)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+
+	return sata->wcache;
+}
+
+static int sil_sata_get_flush(int dev)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+
+	return sata->flush;
+}
+
+static int sil_sata_get_flush_ext(int dev)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+
+	return sata->flush_ext;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+	ulong rc;
+
+	if (sata->lba48)
+		rc = sil_sata_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD);
+	else
+		rc = sil_sata_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD);
+
+	return rc;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+	struct sil_sata *sata = sata_dev_desc[dev].priv;
+	ulong rc;
+
+	if (sata->lba48) {
+		rc = sil_sata_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD);
+		if (sil_sata_get_wcache(dev) && sil_sata_get_flush_ext(dev))
+			sil_sata_cmd_flush_cache_ext(dev);
+	} else {
+		rc = sil_sata_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD);
+		if (sil_sata_get_wcache(dev) && sil_sata_get_flush(dev))
+			sil_sata_cmd_flush_cache(dev);
+	}
+
+	return rc;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+int init_sata(int dev)
+{
+	static int init_done, idx;
+	pci_dev_t devno;
+	u16 word;
+
+	if (init_done == 1 && dev < sata_info.maxport)
+		return 1;
+
+	init_done = 1;
+
+	/* Find PCI device(s) */
+	devno = pci_find_devices(supported, idx++);
+	if (devno == -1)
+		return 1;
+
+	pci_read_config_word(devno, PCI_DEVICE_ID, &word);
+
+	/* get the port count */
+	word &= 0xf;
+
+	sata_info.portbase = sata_info.maxport;
+	sata_info.maxport = sata_info.portbase + word;
+	sata_info.devno = devno;
+
+	/* Read out all BARs */
+	sata_info.iobase[0] = (ulong)pci_map_bar(devno,
+			PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
+	sata_info.iobase[1] = (ulong)pci_map_bar(devno,
+			PCI_BASE_ADDRESS_2, PCI_REGION_MEM);
+	sata_info.iobase[2] = (ulong)pci_map_bar(devno,
+			PCI_BASE_ADDRESS_4, PCI_REGION_MEM);
+
+	/* mask out the unused bits */
+	sata_info.iobase[0] &= 0xffffff80;
+	sata_info.iobase[1] &= 0xfffffc00;
+	sata_info.iobase[2] &= 0xffffff80;
+
+	/* Enable Bus Mastering and memory region */
+	pci_write_config_word(devno, PCI_COMMAND,
+			PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+	/* Check if mem accesses and Bus Mastering are enabled. */
+	pci_read_config_word(devno, PCI_COMMAND, &word);
+	if (!(word & PCI_COMMAND_MEMORY) ||
+			(!(word & PCI_COMMAND_MASTER))) {
+		printf("Error: Can not enable MEM access or Bus Mastering.\n");
+		debug("PCI command: %04x\n", word);
+		return 1;
+	}
+
+	/* GPIO off */
+	writel(0, (void *)(sata_info.iobase[0] + HOST_FLASH_CMD));
+	/* clear global reset & mask interrupts during initialization */
+	writel(0, (void *)(sata_info.iobase[0] + HOST_CTRL));
+
+	return 0;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+int scan_sata(int dev)
+{
+	unsigned char serial[ATA_ID_SERNO_LEN + 1];
+	unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
+	unsigned char product[ATA_ID_PROD_LEN + 1];
+	struct sil_sata *sata;
+	void *port;
+	int cnt;
+	u16 *id;
+	u32 tmp;
+
+	if (dev >= sata_info.maxport) {
+		printf("SATA#%d is not present\n", dev);
+		return 1;
+	}
+
+	printf("SATA#%d\n", dev);
+	port = (void *)sata_info.iobase[1] +
+		PORT_REGS_SIZE * (dev - sata_info.portbase);
+
+	/* Initial PHY setting */
+	writel(0x20c, port + PORT_PHY_CFG);
+
+	/* clear port RST */
+	tmp = readl(port + PORT_CTRL_STAT);
+	if (tmp & PORT_CS_PORT_RST) {
+		writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
+		tmp = ata_wait_register(port + PORT_CTRL_STAT,
+				PORT_CS_PORT_RST, PORT_CS_PORT_RST, 100);
+		if (tmp & PORT_CS_PORT_RST)
+			printf("Err: Failed to clear port RST\n");
+	}
+
+	/* Check if device is present */
+	for (cnt = 0; cnt < 100; cnt++) {
+		tmp = readl(port + PORT_SSTATUS);
+		if ((tmp & 0xF) == 0x3)
+			break;
+		mdelay(1);
+	}
+
+	tmp = readl(port + PORT_SSTATUS);
+	if ((tmp & 0xf) != 0x3) {
+		printf("	(No RDY)\n");
+		return 1;
+	}
+
+	/* Wait for port ready */
+	tmp = ata_wait_register(port + PORT_CTRL_STAT,
+				PORT_CS_RDY, PORT_CS_RDY, 100);
+	if ((tmp & PORT_CS_RDY) != PORT_CS_RDY) {
+		printf("%d port not ready.\n", dev);
+		return 1;
+	}
+
+	/* configure port */
+	sil_config_port(port);
+
+	/* Reset port */
+	writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
+	readl(port + PORT_CTRL_STAT);
+	tmp = ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_DEV_RST,
+				PORT_CS_DEV_RST, 100);
+	if (tmp & PORT_CS_DEV_RST) {
+		printf("%d port reset failed.\n", dev);
+		return 1;
+	}
+
+	sata = (struct sil_sata *)malloc(sizeof(struct sil_sata));
+	if (!sata) {
+		printf("%d no memory.\n", dev);
+		return 1;
+	}
+	memset((void *)sata, 0, sizeof(struct sil_sata));
+
+	/* turn on port interrupt */
+	tmp = readl((void *)(sata_info.iobase[0] + HOST_CTRL));
+	tmp |= (1 << (dev - sata_info.portbase));
+	writel(tmp, (void *)(sata_info.iobase[0] + HOST_CTRL));
+
+	/* Save the private struct to block device struct */
+	sata_dev_desc[dev].priv = (void *)sata;
+	sata->port = port;
+	sata->devno = sata_info.devno;
+	sprintf(sata->name, "SATA#%d", dev);
+	sil_cmd_soft_reset(dev);
+	tmp = readl(port + PORT_SSTATUS);
+	tmp = (tmp >> 4) & 0xf;
+	printf("	(%s)\n", sata_spd_string(tmp));
+
+	id = (u16 *)malloc(ATA_ID_WORDS * 2);
+	if (!id) {
+		printf("Id malloc failed\n");
+		free((void *)sata);
+		return 1;
+	}
+	sil_cmd_identify_device(dev, id);
+
+#ifdef CONFIG_LBA48
+	/* Check if support LBA48 */
+	if (ata_id_has_lba48(id)) {
+		sata_dev_desc[dev].lba48 = 1;
+		sata->lba48 = 1;
+		debug("Device supports LBA48\n");
+	} else
+		debug("Device supports LBA28\n");
+#endif
+
+	/* Serial number */
+	ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
+	memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
+
+	/* Firmware version */
+	ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
+	memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
+
+	/* Product model */
+	ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
+	memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
+
+	/* Totoal sectors */
+	sata_dev_desc[dev].lba = ata_id_n_sectors(id);
+
+	sil_sata_init_wcache(dev, id);
+	sil_cmd_set_feature(dev);
+
+#ifdef DEBUG
+	sil_cmd_identify_device(dev, id);
+	ata_dump_id(id);
+#endif
+	free((void *)id);
+
+	return 0;
+}
diff --git a/drivers/block/sata_sil.h b/drivers/block/sata_sil.h
new file mode 100644
index 0000000..9f3a37f
--- /dev/null
+++ b/drivers/block/sata_sil.h
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Tang Yuantian <b29983 at freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef SATA_SIL3132_H
+#define SATA_SIL3132_H
+
+#define READ_CMD	0
+#define WRITE_CMD	1
+
+/*
+ * SATA device driver struct for each dev
+ */
+struct sil_sata {
+	char	name[12];
+	void	*port;	/* the port base address */
+	int		lba48;
+	u16		pio;
+	u16		mwdma;
+	u16		udma;
+	pci_dev_t devno;
+	int		wcache;
+	int		flush;
+	int		flush_ext;
+};
+
+/* sata info for each controller */
+struct sata_info {
+	ulong iobase[3];
+	pci_dev_t devno;
+	int portbase;
+	int maxport;
+};
+
+/*
+ * Scatter gather entry (SGE),MUST 8 bytes aligned
+ */
+struct sil_sge {
+	__le64 addr;
+	__le32 cnt;
+	__le32 flags;
+} __attribute__ ((aligned(8), packed));
+
+/*
+ * Port request block, MUST 8 bytes aligned
+ */
+struct sil_prb {
+	__le16 ctrl;
+	__le16 prot;
+	__le32 rx_cnt;
+	struct sata_fis_h2d fis;
+} __attribute__ ((aligned(8), packed));
+
+struct sil_cmd_block {
+	struct sil_prb prb;
+	struct sil_sge sge;
+};
+
+enum {
+	HOST_SLOT_STAT		= 0x00, /* 32 bit slot stat * 4 */
+	HOST_CTRL		= 0x40,
+	HOST_IRQ_STAT		= 0x44,
+	HOST_PHY_CFG		= 0x48,
+	HOST_BIST_CTRL		= 0x50,
+	HOST_BIST_PTRN		= 0x54,
+	HOST_BIST_STAT		= 0x58,
+	HOST_MEM_BIST_STAT	= 0x5c,
+	HOST_FLASH_CMD		= 0x70,
+		/* 8 bit regs */
+	HOST_FLASH_DATA		= 0x74,
+	HOST_TRANSITION_DETECT	= 0x75,
+	HOST_GPIO_CTRL		= 0x76,
+	HOST_I2C_ADDR		= 0x78, /* 32 bit */
+	HOST_I2C_DATA		= 0x7c,
+	HOST_I2C_XFER_CNT	= 0x7e,
+	HOST_I2C_CTRL		= 0x7f,
+
+	/* HOST_SLOT_STAT bits */
+	HOST_SSTAT_ATTN		= (1 << 31),
+
+	/* HOST_CTRL bits */
+	HOST_CTRL_M66EN		= (1 << 16), /* M66EN PCI bus signal */
+	HOST_CTRL_TRDY		= (1 << 17), /* latched PCI TRDY */
+	HOST_CTRL_STOP		= (1 << 18), /* latched PCI STOP */
+	HOST_CTRL_DEVSEL	= (1 << 19), /* latched PCI DEVSEL */
+	HOST_CTRL_REQ64		= (1 << 20), /* latched PCI REQ64 */
+	HOST_CTRL_GLOBAL_RST	= (1 << 31), /* global reset */
+
+	/*
+	 * Port registers
+	 * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
+	 */
+	PORT_REGS_SIZE		= 0x2000,
+
+	PORT_LRAM		= 0x0000, /* 31 LRAM slots and PMP regs */
+	PORT_LRAM_SLOT_SZ	= 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
+
+	PORT_PMP		= 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
+	PORT_PMP_STATUS		= 0x0000, /* port device status offset */
+	PORT_PMP_QACTIVE	= 0x0004, /* port device QActive offset */
+	PORT_PMP_SIZE		= 0x0008, /* 8 bytes per PMP */
+
+	/* 32 bit regs */
+	PORT_CTRL_STAT		= 0x1000, /* write: ctrl-set, read: stat */
+	PORT_CTRL_CLR		= 0x1004, /* write: ctrl-clear */
+	PORT_IRQ_STAT		= 0x1008, /* high: status, low: interrupt */
+	PORT_IRQ_ENABLE_SET	= 0x1010, /* write: enable-set */
+	PORT_IRQ_ENABLE_CLR	= 0x1014, /* write: enable-clear */
+	PORT_ACTIVATE_UPPER_ADDR = 0x101c,
+	PORT_EXEC_FIFO		= 0x1020, /* command execution fifo */
+	PORT_CMD_ERR		= 0x1024, /* command error number */
+	PORT_FIS_CFG		= 0x1028,
+	PORT_FIFO_THRES		= 0x102c,
+
+	/* 16 bit regs */
+	PORT_DECODE_ERR_CNT	= 0x1040,
+	PORT_DECODE_ERR_THRESH	= 0x1042,
+	PORT_CRC_ERR_CNT	= 0x1044,
+	PORT_CRC_ERR_THRESH	= 0x1046,
+	PORT_HSHK_ERR_CNT	= 0x1048,
+	PORT_HSHK_ERR_THRESH	= 0x104a,
+
+	/* 32 bit regs */
+	PORT_PHY_CFG		= 0x1050,
+	PORT_SLOT_STAT		= 0x1800,
+	PORT_CMD_ACTIVATE	= 0x1c00, /* 64 bit cmd activate * 31 */
+	PORT_CONTEXT		= 0x1e04,
+	PORT_EXEC_DIAG		= 0x1e00, /* 32bit exec diag * 16 */
+	PORT_PSD_DIAG		= 0x1e40, /* 32bit psd diag * 16 */
+	PORT_SCONTROL		= 0x1f00,
+	PORT_SSTATUS		= 0x1f04,
+	PORT_SERROR		= 0x1f08,
+	PORT_SACTIVE		= 0x1f0c,
+
+	/* PORT_CTRL_STAT bits */
+	PORT_CS_PORT_RST	= (1 << 0), /* port reset */
+	PORT_CS_DEV_RST		= (1 << 1), /* device reset */
+	PORT_CS_INIT		= (1 << 2), /* port initialize */
+	PORT_CS_IRQ_WOC		= (1 << 3), /* interrupt write one to clear */
+	PORT_CS_CDB16		= (1 << 5), /* 0=12b cdb, 1=16b cdb */
+	PORT_CS_PMP_RESUME	= (1 << 6), /* PMP resume */
+	PORT_CS_32BIT_ACTV	= (1 << 10), /* 32-bit activation */
+	PORT_CS_PMP_EN		= (1 << 13), /* port multiplier enable */
+	PORT_CS_RDY		= (1 << 31), /* port ready to accept commands */
+
+	/* PORT_IRQ_STAT/ENABLE_SET/CLR */
+	/* bits[11:0] are masked */
+	PORT_IRQ_COMPLETE	= (1 << 0), /* command(s) completed */
+	PORT_IRQ_ERROR		= (1 << 1), /* command execution error */
+	PORT_IRQ_PORTRDY_CHG	= (1 << 2), /* port ready change */
+	PORT_IRQ_PWR_CHG	= (1 << 3), /* power management change */
+	PORT_IRQ_PHYRDY_CHG	= (1 << 4), /* PHY ready change */
+	PORT_IRQ_COMWAKE	= (1 << 5), /* COMWAKE received */
+	PORT_IRQ_UNK_FIS	= (1 << 6), /* unknown FIS received */
+	PORT_IRQ_DEV_XCHG	= (1 << 7), /* device exchanged */
+	PORT_IRQ_8B10B		= (1 << 8), /* 8b/10b decode error threshold */
+	PORT_IRQ_CRC		= (1 << 9), /* CRC error threshold */
+	PORT_IRQ_HANDSHAKE	= (1 << 10), /* handshake error threshold */
+	PORT_IRQ_SDB_NOTIFY	= (1 << 11), /* SDB notify received */
+
+	DEF_PORT_IRQ		= PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
+				  PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
+				  PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
+
+	/* bits[27:16] are unmasked (raw) */
+	PORT_IRQ_RAW_SHIFT	= 16,
+	PORT_IRQ_MASKED_MASK	= 0x7ff,
+	PORT_IRQ_RAW_MASK	= (0x7ff << PORT_IRQ_RAW_SHIFT),
+
+	/* ENABLE_SET/CLR specific, intr steering - 2 bit field */
+	PORT_IRQ_STEER_SHIFT	= 30,
+	PORT_IRQ_STEER_MASK	= (3 << PORT_IRQ_STEER_SHIFT),
+
+	/* PORT_CMD_ERR constants */
+	PORT_CERR_DEV		= 1, /* Error bit in D2H Register FIS */
+	PORT_CERR_SDB		= 2, /* Error bit in SDB FIS */
+	PORT_CERR_DATA		= 3, /* Error in data FIS not detected by dev */
+	PORT_CERR_SEND		= 4, /* Initial cmd FIS transmission failure */
+	PORT_CERR_INCONSISTENT	= 5, /* Protocol mismatch */
+	PORT_CERR_DIRECTION	= 6, /* Data direction mismatch */
+	PORT_CERR_UNDERRUN	= 7, /* Ran out of SGEs while writing */
+	PORT_CERR_OVERRUN	= 8, /* Ran out of SGEs while reading */
+
+	/* bits of PRB control field */
+	PRB_CTRL_PROTOCOL	= (1 << 0), /* override def. ATA protocol */
+	PRB_CTRL_PACKET_READ	= (1 << 4), /* PACKET cmd read */
+	PRB_CTRL_PACKET_WRITE	= (1 << 5), /* PACKET cmd write */
+	PRB_CTRL_NIEN		= (1 << 6), /* Mask completion irq */
+	PRB_CTRL_SRST		= (1 << 7), /* Soft reset request (ign BSY?) */
+
+	/* PRB protocol field */
+	PRB_PROT_PACKET		= (1 << 0),
+	PRB_PROT_TCQ		= (1 << 1),
+	PRB_PROT_NCQ		= (1 << 2),
+	PRB_PROT_READ		= (1 << 3),
+	PRB_PROT_WRITE		= (1 << 4),
+	PRB_PROT_TRANSPARENT	= (1 << 5),
+
+	/*
+	 * Other constants
+	 */
+	SGE_TRM			= (1 << 31), /* Last SGE in chain */
+	SGE_LNK			= (1 << 30), /* linked list
+						Points to SGT, not SGE */
+	SGE_DRD			= (1 << 29), /* discard data read (/dev/null)
+						data address ignored */
+
+	CMD_ERR		= 0x21,
+};
+
+#endif
diff --git a/include/pci_ids.h b/include/pci_ids.h
index 02a6c6e..12e4c02 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -2110,3 +2110,8 @@
 
 #define PCI_VENDOR_ID_ADMTEK		0x1317
 #define PCI_DEVICE_ID_ADMTEK_AN983B	0x0985
+
+#define PCI_VENDOR_ID_SILICONIMAGE	0x1095
+#define PCI_DEVICE_ID_SIL3132		0x3132
+#define PCI_DEVICE_ID_SIL3124		0x3124
+#define PCI_DEVICE_ID_SIL3131		0x3131
-- 
1.6.4




More information about the U-Boot mailing list