[U-Boot] [PATCH 5/5] powerpc/p2041rdb: Add ethernet support on P2041RDB board

[Kumar Gala]

On Aug 1, 2011, at 1:23 AM, Kumar Gala wrote:

> From: Mingkai Hu <Mingkai.hu at freescale.com>
> 
> Add support for RGMII, SGMII and XAUI Ethernet on P2041RDB board.
> 
> The five dTSEC can be routed to two on-board RGMII phy, three on-board
> SGMII phy or four SGMII phy on SGMII riser card according to different
> serdes protocol configuration and board lane configuration. Also updated
> the device tree to direct the Fmac MAC to the correct PHY.
> 
> Removed CONFIG_SYS_FMAN_FW as its not used anywhere.
> 
> Signed-off-by: Mingkai Hu <Mingkai.hu at freescale.com>
> Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
> ---
> board/freescale/p2041rdb/Makefile   |    1 +
> board/freescale/p2041rdb/eth.c      |  225 +++++++++++++++++++++++++++++++++++
> board/freescale/p2041rdb/p2041rdb.c |    4 +
> include/configs/P2041RDB.h          |    6 +-
> 4 files changed, 235 insertions(+), 1 deletions(-)
> create mode 100644 board/freescale/p2041rdb/eth.c

applied to 85xx next

- k