[U-Boot] [PATCH 09/10] microblaze: Save and restore first unused vector

Michal Simek monstr at monstr.eu
Wed Aug 31 10:35:20 CEST 2011


Use one memory space to detect little/big endian platforms.
The first unused address(0x28) is used instead 0x0 address (reset vectors).
Detection rewrited reset vector setup from first stage bootloader.

Workflow:
1. Store 0x28 to r7
2. Do little/big endian test
3. Restore r7 to 0x28

Signed-off-by: Michal Simek <monstr at monstr.eu>
---
 arch/microblaze/cpu/start.S |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 34b07d8..97dd757 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -50,8 +50,10 @@ _start:
 	 * 4b) BIG endian - r10 contains 0x0 because 0x2 offset is on addr 0x3
 	 */
 	addik	r6, r0, 0x2 /* BIG/LITTLE endian offset */
-	swi	r6, r0, 0
-	lbui	r10, r0, 0
+	lwi	r7, r0, 0x28
+	swi	r6, r0, 0x28 /* used first unused MB vector */
+	lbui	r10, r0, 0x28 /* used first unused MB vector */
+	swi	r7, r0, 0x28
 
 	/* add opcode instruction for 32bit jump - 2 instruction imm & brai */
 	addi	r2, r0, 0xb0000000	/* hex b000 opcode imm */
-- 
1.5.5.6



More information about the U-Boot mailing list