[U-Boot] [PATCH 1/6] mtd: add writebufsize field to mtd_info struct

[Holger Brunck]

Hi Detlev,

Detlev Zundel wrote:
> Hi Stefan,
> 
> do you have any comment on this series?  I delegated the patches to you
> in patchwork already :)  No seriously, the patches look sane and are in
> accordance to what is done in Linux....
> 
>> This field will be used to indicate the write buffer size
>> of the MTD device. UBI will set it's minimal I/O unit size
>> (min_io_size) to the indicated write buffer size. By this
>> change we intend to fix failed recovery of UBIFS partitions
>> we currently observe on NOR flash when mounting the partition
>> after unclean unmount.
>>
>> Currently the min_io_size is set to mtd->writesize (which is 1
>> byte for NOR flash). But flash programming is often done from
>> prepared write buffer containing multiple bytes and is performed
>> in one programming operation which could be interrupted by a power
>> cut or a system reset causing corrupted (partially written) areas
>> in a flash sector. Knowing the size of potentially corrupted areas
>> UBIFS scanning and recovery algorithms are able to perform
>> successful recovery.
>>
>> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> 

as I told in another mail, the min I/O size adaption patch leads to
incompatibilites for the UBIFS and therefore the similar patch in linux kernel
was reverted. But anyway the first five patches in the patch serie are already
part of the mtd layer of the linux kernel.

So the patches 1-5 of this series can also be committed to u-boot. Whats your
opinion?

Regards
Holger Brunck