[U-Boot] Berfore relocation.

[Wolfgang Denk]

Dear Lakshmi T,

In message <002b01cbc370$fc2e0920$f48a1b60$@com> you wrote:
> 
> I am very new to U-boot and trying to port u-boot onto MPC885 platform.
> 
> I have done necessary changes in uboot and burned the Uboot binary in NOR
> based FLASH.
> 
> The code is executing from FLASH and am able to see console messages.
> 
> And no messages are seen after the following
> 
>  
> 
> U-Boot 1.1.6 (Feb  2 2011 - 18:01:58)
> 
>  
> 
> CPU:   MPC885ZPnn at 50 MHz: 8 kB I-Cache 8 kB D-Cache FEC present
> 
> Board: MPC885ADS
> 
> DRAM:  (8 MB SDRAM)  8 MB
> 
> BEFORE RELOCATE

Can you please stop adding all these bogus empy lines?  Thanks.

Re your problem: Please see the FAQ at
http://www.denx.de/wiki/view/DULG/UBootCrashAfterRelocation

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Plan to throw one away. You will anyway."
                              - Fred Brooks, "The Mythical Man Month"