[U-Boot] [PATCH 10/32] x86: Call early_board_init when warm booting

Graeme Russ graeme.russ at gmail.com
Fri Feb 4 13:35:37 CET 2011


early_board_init has been skipped to avoid SDRAM corruption in the case
that a fully relocatable image has been loaded into SDRAM and is being
executed from SDRAM. x86 is being aligned with other architectures (ARM
and PPC in particlar) and will be using Cache-As-RAM to run a C
environment from Flash (or SRAM if you have some). early_board_init may
be needed to assist in the setup of Cache-As-RAM and the early C
environment

Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
---
 arch/i386/cpu/start.S |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/i386/cpu/start.S b/arch/i386/cpu/start.S
index 460c21b..97bac8f 100644
--- a/arch/i386/cpu/start.S
+++ b/arch/i386/cpu/start.S
@@ -67,16 +67,16 @@ _start:
 	/* Clear the interupt vectors */
 	lidt	blank_idt_ptr
 
-	/* Skip low-level initialization if not starting from cold-reset */
-	movl	%ebx, %ecx
-	andl	$GD_FLG_COLD_BOOT, %ecx
-	jz	skip_mem_init
-
 	/* Early platform init (setup gpio, etc ) */
 	jmp	early_board_init
 .globl early_board_init_ret
 early_board_init_ret:
 
+	/* Skip memory initialization if not starting from cold-reset */
+	movl	%ebx, %ecx
+	andl	$GD_FLG_COLD_BOOT, %ecx
+	jz	skip_mem_init
+
 	/* size memory */
 	jmp	mem_init
 .globl mem_init_ret
-- 
1.7.1.422.g049e9



More information about the U-Boot mailing list