[U-Boot] Can't erase or read NOR using mtd part-id

[Alexandre Gambier]

Hello,

thanks for your reply.
I'm running u-boot 1.3.1. I got it from STLinux.

I will try to set CONFIG_JFFS2.
But does it mean it will erase the partition using JFFS2 ?
Will it support to read and write the environment settings with this 
file format ?

Alex


On 02/09/2011 05:10 PM, Alexander Stein wrote:
> Hello,
>
> On Wednesday 09 February 2011, 16:52:35 Alexandre Gambier wrote:
>> I'm using u-boot to boot a Linux-based device.
> Which version og u-boot are you running?
>
>> I created some MTD partitions for my NOR and NAND flashes.
>>
>> Here is the configuration:
>>
>> device nor0<NOR>, # parts = 4
>>    #: name                        size            offset          mask_flags
>>    0: U-Boot              0x00080000      0x00000000      0
>>    1: Environment         0x00020000      0x00080000      0
>>    2: Kernel              0x00400000      0x000a0000      0
>>    3: FreeNOR             0x00360000      0x004a0000      0
>>
>> device nand0<NAND>, # parts = 2
>>    #: name                        size            offset          mask_flags
>>    0: FS                  0x02000000      0x00000000      0
>>    1: FreeNAND            0x06000000      0x02000000      0
>>
>> active partition: nor0,0 - (U-Boot) 0x00080000 @ 0x00000000
>>
>> defaults:
>> mtdids  : nor0=NOR,nand0=NAND
>> mtdparts:
>> mtdparts=NOR:512k(U-Boot),128k(Environment),4M(Kernel),-(FreeNOR);NAND:32M(
>> FS),-(FreeNAND)
>>
>> When I want to erase the U-Boot partition I can't use the command `erase
>> U-Boot`, the following error occurs : "incorrect device type in U-Boot".
>> I must use the command `erase 1:0-7`.
>>
>> Is-it normal ?
> Some old version also had to set CONFIG_JFFS2 to get erase&  friends to accept
> mtdparts.
>
> HTH
> Alexander
>