[U-Boot] [PATCH 3/4] powerpc/85xx: load ucode from nand flash before qe_init

[Kumar Gala]

On Feb 7, 2011, at 3:14 PM, <Haiying.Wang at freescale.com> <Haiying.Wang at freescale.com> wrote:

> From: Haiying Wang <Haiying.Wang at freescale.com>
> 
> In the case the QE's microcode is stored in nand flash, we need to load it from
> NAND flash to ddr first then the qe_init can get the ucode correctly.
> 
> Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
> ---
> arch/powerpc/cpu/mpc85xx/cpu_init.c |   17 +++++++++++++++++
> 1 files changed, 17 insertions(+), 0 deletions(-)

applied to 85xx dev

- k