[U-Boot] [PATCH] powerpc/85xx: Add P1021/P1012 specific QE and UEC support
Kumar Gala
galak at kernel.crashing.org
Thu Feb 10 07:14:21 CET 2011
From: Haiying Wang <Haiying.Wang at freescale.com>
P1021 has some QE pins which need to be set in pmuxcr register before using QE
functions. In this patch, pin QE0 and QE3 are set for UCC1 and UCC5 in Eth mode.
QE9 and QE12 are set for MII management. QE12 needs to be released after MII
access because QE12 pin is muxed with LBCTL signal.
Also added relevant QE support defines unique to P1021/P1012.
Signed-off-by: Haiying Wang <Haiying.Wang at freescale.com>
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
arch/powerpc/cpu/mpc85xx/speed.c | 4 +++
arch/powerpc/include/asm/config_mpc85xx.h | 6 ++++
arch/powerpc/include/asm/immap_85xx.h | 37 ++++++++++++++++++++++-------
drivers/qe/uec.c | 32 ++++++++++++++++++++++++-
4 files changed, 69 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index d440b6a..dbe0ea4 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -165,10 +165,14 @@ void get_sys_info (sys_info_t * sysInfo)
#endif
#ifdef CONFIG_QE
+#ifdef CONFIG_P1021
+ sysInfo->freqQE = sysInfo->freqSystemBus;
+#else
qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
>> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ;
#endif
+#endif
#ifdef CONFIG_SYS_DPAA_FMAN
sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 18327fd..2afb16a 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -103,6 +103,9 @@
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define QE_MURAM_SIZE 0x6000UL
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
#elif defined(CONFIG_P1013)
#define CONFIG_MAX_CPUS 1
@@ -137,6 +140,9 @@
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
+#define QE_MURAM_SIZE 0x6000UL
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
#elif defined(CONFIG_P1022)
#define CONFIG_MAX_CPUS 2
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index d26d648..b58ecd8 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1923,6 +1923,19 @@ typedef struct ccsr_gur {
#define MPC85xx_PMUXCR_SD_DATA 0x80000000
#define MPC85xx_PMUXCR_SDHC_CD 0x40000000
#define MPC85xx_PMUXCR_SDHC_WP 0x20000000
+#define MPC85xx_PMUXCR_QE0 0x00008000
+#define MPC85xx_PMUXCR_QE1 0x00004000
+#define MPC85xx_PMUXCR_QE2 0x00002000
+#define MPC85xx_PMUXCR_QE3 0x00001000
+#define MPC85xx_PMUXCR_QE4 0x00000800
+#define MPC85xx_PMUXCR_QE5 0x00000400
+#define MPC85xx_PMUXCR_QE6 0x00000200
+#define MPC85xx_PMUXCR_QE7 0x00000100
+#define MPC85xx_PMUXCR_QE8 0x00000080
+#define MPC85xx_PMUXCR_QE9 0x00000040
+#define MPC85xx_PMUXCR_QE10 0x00000020
+#define MPC85xx_PMUXCR_QE11 0x00000010
+#define MPC85xx_PMUXCR_QE12 0x00000008
u32 pmuxcr2; /* Alt. function signal multiplex control 2 */
u8 res6[8];
u32 devdisr; /* Device disable control */
@@ -1956,29 +1969,35 @@ typedef struct ccsr_gur {
u8 res9[12];
u32 pvr; /* Processor version */
u32 svr; /* System version */
- u8 res10a[8];
+ u8 res10[8];
u32 rstcr; /* Reset control */
#if defined(CONFIG_MPC8568)||defined(CONFIG_MPC8569)
- u8 res10b[76];
+ u8 res11a[76];
par_io_t qe_par_io[7];
- u8 res10c[1600];
+ u8 res11b[1600];
+#elif defined(CONFIG_P1021)
+ u8 res11a[12];
+ u32 iovselsr;
+ u8 res11b[60];
+ par_io_t qe_par_io[3];
+ u8 res11c[1496];
#else
- u8 res10b[1868];
+ u8 res11a[1868];
#endif
u32 clkdvdr; /* Clock Divide register */
- u8 res10d[1532];
+ u8 res12[1532];
u32 clkocr; /* Clock out select */
- u8 res11[12];
+ u8 res13[12];
u32 ddrdllcr; /* DDR DLL control */
- u8 res12[12];
+ u8 res14[12];
u32 lbcdllcr; /* LBC DLL control */
- u8 res13[248];
+ u8 res15[248];
u32 lbiuiplldcr0; /* LBIU PLL Debug Reg 0 */
u32 lbiuiplldcr1; /* LBIU PLL Debug Reg 1 */
u32 ddrioovcr; /* DDR IO Override Control */
u32 tsec12ioovcr; /* eTSEC 1/2 IO override control */
u32 tsec34ioovcr; /* eTSEC 3/4 IO override control */
- u8 res15[61648];
+ u8 res16[61648];
} ccsr_gur_t;
#endif
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 282ab23..af86946 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2006-2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2006-2011 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu at freescale.com>
*
@@ -588,9 +588,25 @@ static void phy_change(struct eth_device *dev)
{
uec_private_t *uec = (uec_private_t *)dev->priv;
+#ifdef CONFIG_P1021
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ /* QE9 and QE12 need to be set for enabling QE MII managment signals */
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
+#endif
+
/* Update the link, speed, duplex */
uec->mii_info->phyinfo->read_status(uec->mii_info);
+#ifdef CONFIG_P1021
+ /*
+ * QE12 is muxed with LBCTL, it needs to be released for enabling
+ * LBCTL signal for LBC usage.
+ */
+ clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
+#endif
+
/* Adjust the interface according to speed */
adjust_link(dev);
}
@@ -1198,10 +1214,19 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
uec_private_t *uec;
int err, i;
struct phy_info *curphy;
+#ifdef CONFIG_P1021
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
uec = (uec_private_t *)dev->priv;
if (uec->the_first_run == 0) {
+#ifdef CONFIG_P1021
+ /* QE9 and QE12 need to be set for enabling QE MII managment signals */
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
+#endif
+
err = init_phy(dev);
if (err) {
printf("%s: Cannot initialize PHY, aborting.\n",
@@ -1228,6 +1253,11 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
udelay(100000);
} while (1);
+#ifdef CONFIG_P1021
+ /* QE12 needs to be released for enabling LBCTL signal*/
+ clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
+#endif
+
if (err || i <= 0)
printf("warning: %s: timeout on PHY link\n", dev->name);
--
1.7.2.3
More information about the U-Boot
mailing list