[U-Boot] [PATCH v2 3/4] Add In-Circuit sam9g45_oem board
Marcel Janssen
korgull at home.nl
Sun Feb 13 22:52:35 CET 2011
From: Marcel <korgull at home.nl>
sam9g45_oem cleanup phase1
sam9g45_oem cleanup phase2
sam9g45_oem cleanup phase3
Signed-off-by: Marcel <korgull at home.nl>
---
board/in-circuit/icnova/Makefile | 50 ++++++
board/in-circuit/icnova/icnova_sam9g45.c | 242 ++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/icnova_sam9g45.h | 253 ++++++++++++++++++++++++++++++
4 files changed, 546 insertions(+), 0 deletions(-)
create mode 100644 board/in-circuit/icnova/Makefile
create mode 100644 board/in-circuit/icnova/icnova_sam9g45.c
create mode 100644 include/configs/icnova_sam9g45.h
diff --git a/board/in-circuit/icnova/Makefile b/board/in-circuit/icnova/Makefile
new file mode 100644
index 0000000..bf64680
--- /dev/null
+++ b/board/in-circuit/icnova/Makefile
@@ -0,0 +1,50 @@
+# (C) Copyright 2011 Marcel Janssen, Admesy B.V.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# Copyright (C) 2005-2006 Atmel Corporation
+#
+# (C) 2008 - 2010 Benjamin Tietz, In-Circuit benjamin.tietz at in-circuit.de
+# (C) 2011 Marcel Janssen, Admesy B.V.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/include/config.mk
+
+LIB := $(obj)lib$(BOARD).o
+
+COBJS := icnova_sam9g45.o
+
+COBJS-y += $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+# $(obj).depend
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/in-circuit/icnova/icnova_sam9g45.c b/board/in-circuit/icnova/icnova_sam9g45.c
new file mode 100644
index 0000000..8407b0b
--- /dev/null
+++ b/board/in-circuit/icnova/icnova_sam9g45.c
@@ -0,0 +1,242 @@
+/*
+ * (C) 2010 Benjamin Tietz, In-Circuit <benjamin.tietz at in-circuit.de>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <exports.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9g45.h>
+#include <asm/arch/at91sam9_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#include <usb/atmel_usba_udc.h>
+#ifdef CONFIG_USBD_DFU
+#include <usb_dfu.h>
+#endif
+
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) && !defined(CONFIG_USB_GADGET)
+#error "Need CONFIG_USB_GADGET when CONFIG_USB_GADGET_ATMEL_USBA enabled"
+#endif
+
+
+DECLARE_GLOBAL_DATA_PTR;
+char bootbuf[20];
+
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+struct platform_data brd = {
+ .board = {
+ .vbus_pin = AT91_PIN_PC0,
+ .pullup_pin = 1,
+ },
+ .udc_clk = AT91SAM9G45_ID_UDPHS,
+};
+#endif
+
+#ifdef CONFIG_CMD_NAND
+static void icnova_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(8) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(8) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(28) | AT91_SMC_NCS_WRPULSE_(20) |
+ AT91_SMC_NRDPULSE_(28) | AT91_SMC_NCS_RDPULSE_(20));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(36) | AT91_SMC_NRDCYCLE_(36));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+ AT91_SMC_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+ AT91_SMC_DBW_8 |
+#endif
+ AT91_SMC_TDF_(3));
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC);
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+
+#ifdef CONFIG_MACB
+static void icnova_arm9_macb_hw_init(void)
+{
+ /*
+ * Disable pull-up on:
+ * RXDV (PA15) => PHY normal mode (not Test mode)
+ * ERX0 (PA12) => PHY ADDR0
+ * ERX1 (PA13) => PHY ADDR1
+ * ERX2 (PA8) => PHY ADDR2
+ * ERX3 (PA9) => PHY ADDR3
+ * ECRS (PA29) => PHY ADDR4 => PHYADDR = 0x0
+ * ECOL (PA30) => full MII interface
+ * ERXER (PA16) => no repeater
+ * ETXCLK (PA17) => no isolate
+ */
+ unsigned long phy_mask = 0;
+ /* Reset and pdwn-pins */
+ unsigned long rst = pin_to_mask(AT91_PIN_PA27);
+ unsigned long pdwn = 0;
+ phy_mask = pin_to_mask(AT91_PIN_PA15) |
+ pin_to_mask(AT91_PIN_PA8) |
+ pin_to_mask(AT91_PIN_PA9) |
+ pin_to_mask(AT91_PIN_PA12) |
+ pin_to_mask(AT91_PIN_PA13) |
+ pin_to_mask(AT91_PIN_PA29) |
+ pin_to_mask(AT91_PIN_PA30) |
+ pin_to_mask(AT91_PIN_PA16) |
+ pin_to_mask(AT91_PIN_PA17);
+ /* Reset and pdwn-pins */
+ rst = pin_to_mask(AT91_PIN_PA26);
+ pdwn = pin_to_mask(AT91_PIN_PA25);
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC);
+ /*
+ * Set up Pins
+ */
+ writel(rst | pdwn | phy_mask,
+ pin_to_controller(AT91_PIN_PA0) + PIO_PER);
+ writel(rst | pdwn | phy_mask,
+ pin_to_controller(AT91_PIN_PA0) + PIO_OER);
+ writel(rst | pdwn | phy_mask,
+ pin_to_controller(AT91_PIN_PA0) + PIO_CODR);
+ udelay(1000);
+ writel(rst,
+ pin_to_controller(AT91_PIN_PA0) + PIO_SODR);
+ udelay(500000);
+
+ at91_macb_hw_init();
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+#ifdef CONFIG_ICNOVA_ARM9
+ printf("Board : SAM9G45oem\n");
+#endif
+ return 0;
+}
+#endif
+
+
+#ifdef CONFIG_CMD_USB
+static void at91sam9g45_usb_hw_init(void)
+{
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
+
+ at91_set_gpio_output(AT91_PIN_PC9, 0);
+ at91_set_gpio_output(AT91_PIN_PC0, 0);
+}
+#endif
+
+int board_init(void)
+{
+ /* Enable Ctrlc */
+ console_init_f();
+
+ /* the board should get it's own ID. left in for now */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ icnova_nand_hw_init();
+#endif
+
+#ifdef CONFIG_MACB
+ icnova_arm9_macb_hw_init();
+#endif
+
+#ifdef CONFIG_CMD_USB
+ at91sam9g45_usb_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size(
+ (void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+ /*
+ * Initialize ethernet HW addr prior to starting Linux,
+ * needed for nfsroot
+ * eth_init(gd->bd);
+ */
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+
+#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_GADGET_ATMEL_USBA)
+ rc = usba_udc_probe(&brd);
+ if (!rc)
+ rc = usb_eth_initialize(bis);
+#endif
+
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00);
+#endif
+
+ return rc;
+}
diff --git a/boards.cfg b/boards.cfg
index 9b34287..273f3c6 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -105,6 +105,7 @@ imx27lite arm arm926ejs imx27lite logicpd
magnesium arm arm926ejs imx27lite logicpd mx27
omap5912osk arm arm926ejs - ti omap
edminiv2 arm arm926ejs - LaCie orion5x
+icnova_sam9g45 arm arm926ejs icnova in-circuit at91
ca9x4_ct_vxp arm armv7 vexpress armltd
efikamx arm armv7 efikamx - mx5
mx51evk arm armv7 mx51evk freescale mx5
diff --git a/include/configs/icnova_sam9g45.h b/include/configs/icnova_sam9g45.h
new file mode 100644
index 0000000..6d1d6e8
--- /dev/null
+++ b/include/configs/icnova_sam9g45.h
@@ -0,0 +1,253 @@
+/*
+ * (C) Copyright 2010
+ * Marcel Janssen <marcel.janssen at admesy.nl>
+ *
+ * based on parts from at91sam9263ek.h
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the ICnova SAM9G45 OEM board.
+ * Moved from In-circuit configuration from u-boot-2009.11
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/arch-at91/at91sam9_sdramc.h>
+
+#define CONFIG_SYS_TEXT_BASE 0x73f00000
+
+#define CONFIG_ARM926EJS /* This is an ARM926EJS Core */
+#define CONFIG_ICNOVA_ARM9 /* It's an ICnova SAM9G45 OEM boardR */
+#define CONFIG_AT91SAM9G45 /* It's an Atmel AT91SAM9G45 SoC */
+#define CONFIG_AT91FAMILY
+#define CONFIG_ARCH_AT91
+#define CONFIG_AT91_LEGACY /* needed for some defines */
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_CMD_EDITENV
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_DISPLAY_BOARDINFO /* doesn't work properly yet */
+
+/* Command line configuration. */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_FLASH
+/* support FAT support for mem stick or so */
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+
+/* Hardware drivers */
+#define CONFIG_AT91_GPIO
+#define CONFIG_ATMEL_USART
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 /* USART 3 is DBGU */
+
+/* Ethernet */
+#define CONFIG_MACB 1
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_RESET_PHY_R 1
+#define CONFIG_MACB_SEARCH_PHY 1
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#define CONFIG_SYS_RX_ETH_BUFFER 1
+
+/* LED */
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PA22
+#define CONFIG_GREEN_LED AT91_PIN_PA23
+
+#define STATUS_LED_RED 0
+#define STATUS_LED_GREEN 1
+/* Red */
+#define STATUS_LED_BIT STATUS_LED_RED
+#define STATUS_LED_STATE STATUS_LED_OFF
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+/* Green */
+#define STATUS_LED_BIT1 STATUS_LED_GREEN
+#define STATUS_LED_STATE1 STATUS_LED_OFF
+#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
+
+/* USB Host */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
+#define CONFIG_DOS_PARTITION
+#define CONFIG_USB_STORAGE
+
+/* USB gadget support for Ethernet over USB */
+#define CONFIG_USB_GADGET 1
+#define CONFIG_USB_GADGET_ATMEL_USBA 1
+#define CONFIG_USB_GADGET_DUALSPEED 1
+/* only one of these can be active */
+/* You can have only Ethernet or DFU via USB, not both for now */
+/* #define CONFIG_USB_ETHER 1 */
+#define CONFIG_USBD_DFU 1
+
+#ifdef CONFIG_USBD_DFU
+#define CONFIG_USBD_VENDORID 0x23CF /* Admesy */
+#define CONFIG_USBD_PRODUCTID_DFU 0x0100 /* donated for u-boot DFU */
+#define CONFIG_USBD_MANUFACTURER "Admesy"
+#define CONFIG_USBD_PRODUCT_NAME "Admesy ICNOVA DFU"
+#define CONFIG_USBD_DFU_XFER_SIZE 4096
+#define CONFIG_USBD_DFU_INTERFACE 0
+#define DFU_NUM_ALTERNATES 3 /* 3 partitions */
+#define LOAD_ADDR ((unsigned char *)0x70400000) /* RAM address for dnload */
+#endif
+
+#ifdef CONFIG_USB_ETHER
+#define CONFIG_USBD_MANUFACTURER "Armzone"
+#define CONFIG_USBD_PRODUCT_NAME "DFU Bootloader " U_BOOT_VERSION
+#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0"
+#define CONFIG_USBD_DFU_XFER_SIZE 4096
+#define CONFIG_USBD_DFU_INTERFACE 2
+#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */
+#define CONFIG_USBD_PRODUCTID_CDCACM 0x511d /* CDC ACM */
+#define CONFIG_USBNET_MANUFACTURER "usba_udc" /* "Atmel AT91SAM9G45" */
+#define CONFIG_USBNET_DEV_ADDR "00:1f:e5:00:1c:7c"
+#define CONFIG_USBNET_HOST_ADDR "0a:fa:63:8b:e8:0a"
+#define CONFIG_USB_CDC_VENDOR_ID 0x0525
+#define CONFIG_USB_CDC_PRODUCT_ID 0xa4a1
+#define CONFIG_USB_RNDIS_VENDOR_ID 0x0525
+#define CONFIG_USB_RNDIS_PRODUCT_ID 0xa4a2
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+#endif
+
+/*
+ * SDRAM: 1 bank, min 32, max 128 MB
+ * Initialized before u-boot gets started.
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
+ + CONFIG_SYS_SDRAM_SIZE)
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_LOAD_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x00400000)
+#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024)
+/* additions for new relocation code */
+#define CONFIG_SYS_SDRAM_BASE 0x70000000
+#define IRAM_BASE_ADDR 0x00300000
+#define IRAM_SIZE 0x00010000
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_GBL_DATA_OFFSET)
+
+#define CONFIG_SYS_MALLOC_LEN (256*1024)
+
+/* NAND flash */
+#define CONFIG_NAND_ATMEL
+#define CONFIG_CMD_MTDPARTS 1
+#define CONFIG_MTD_DEVICE 1
+#define CONFIG_NAND_MAX_CHIPS 1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC8
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC11
+
+/* NOR flash - holds At91bootstrap (sect 1)+u-boot(sec 2-...)+env(sector7) */
+#define CONFIG_CMD_JFFS2 1
+#define CONFIG_CMD_FLASH
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_BASE 0x10000000
+#define CONFIG_SYS_FLASH_SIZE 0x00100000
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_SECT 8
+#define CONFIG_SYS_MAX_FLASH_SECT 8
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_SEC 1:0-7
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SIZE (CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_FLASH_SECT)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x000E0000)
+
+/* Some default env stuff */
+#define MTDIDS_DEFAULT "nand0=nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=nand.0:2M(kernel),16M(root),-(Data)"
+#undef CONFIG_BOOTARGS
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTARGS "root=1F01 rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND "mtdparts default; nand read 0x71000000 \
+ nand0,0; bootm 0x71000000"
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "Sam9g45> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE 1
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (16*2048) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
--
1.7.3.4
More information about the U-Boot
mailing list