[U-Boot] [PATCH 2/7] mpc8xxx: DDR2/3: Use human-readable SPD DIMM-type constants
Kyle Moffett
Kyle.D.Moffett at boeing.com
Mon Feb 21 18:59:54 CET 2011
Use #define constants to enhance readability of DDR2/3 SPD parsing code.
Also add the DDR2 type for an SO-RDIMM module to the switch statement.
Signed-off-by: Kyle Moffett <Kyle.D.Moffett at boeing.com>
---
arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c | 34 +++++++++++++++------
arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 37 ++++++++++-------------
common/ddr_spd.c | 2 +-
include/ddr_spd.h | 28 ++++++++++++-----
4 files changed, 60 insertions(+), 41 deletions(-)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
index dcb37ce..d1f0f2b 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
@@ -250,24 +250,27 @@ ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd,
pdimm->primary_sdram_width = spd->primw;
pdimm->ec_sdram_width = spd->ecw;
- /* FIXME: what about registered SO-DIMM? */
+ /* These are all the types defined by the JEDEC DDR2 SPD 1.3 spec */
switch (spd->dimm_type) {
- case 0x01: /* RDIMM */
- case 0x10: /* Mini-RDIMM */
- pdimm->registered_dimm = 1; /* register buffered */
+ case DDR2_SPD_DIMMTYPE_RDIMM:
+ case DDR2_SPD_DIMMTYPE_72B_SO_RDIMM:
+ case DDR2_SPD_DIMMTYPE_MINI_RDIMM:
+ /* Registered/buffered DIMMs */
+ pdimm->registered_dimm = 1;
break;
- case 0x02: /* UDIMM */
- case 0x04: /* SO-DIMM */
- case 0x08: /* Micro-DIMM */
- case 0x20: /* Mini-UDIMM */
- pdimm->registered_dimm = 0; /* unbuffered */
+ case DDR2_SPD_DIMMTYPE_UDIMM:
+ case DDR2_SPD_DIMMTYPE_SO_DIMM:
+ case DDR2_SPD_DIMMTYPE_MICRO_DIMM:
+ case DDR2_SPD_DIMMTYPE_MINI_UDIMM:
+ /* Unbuffered DIMMs */
+ pdimm->registered_dimm = 0;
break;
+ case DDR2_SPD_DIMMTYPE_72B_SO_CDIMM:
default:
printf("unknown dimm_type 0x%02X\n", spd->dimm_type);
return 1;
- break;
}
/* SDRAM device parameters */
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
index 29cea53..e31f201 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
@@ -128,24 +128,30 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
pdimm->data_width = pdimm->primary_sdram_width
+ pdimm->ec_sdram_width;
- switch (spd->module_type & 0xf) {
- case 0x01: /* RDIMM */
- case 0x05: /* Mini-RDIMM */
- pdimm->registered_dimm = 1; /* register buffered */
+ /* These are the types defined by the JEDEC DDR3 SPD spec */
+ switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) {
+ case DDR3_SPD_MODULETYPE_RDIMM:
+ case DDR3_SPD_MODULETYPE_MINI_RDIMM:
+ /* Registered/buffered DIMMs */
+ pdimm->registered_dimm = 1;
+ pdimm->mirrored_dimm = 0;
for (i = 0; i < 16; i += 2) {
pdimm->rcw[i] = spd->mod_section.registered.rcw[i/2] & 0x0F;
pdimm->rcw[i+1] = (spd->mod_section.registered.rcw[i/2] >> 4) & 0x0F;
}
break;
- case 0x02: /* UDIMM */
- case 0x03: /* SO-DIMM */
- case 0x04: /* Micro-DIMM */
- case 0x06: /* Mini-UDIMM */
- pdimm->registered_dimm = 0; /* unbuffered */
+
+ case DDR3_SPD_MODULETYPE_UDIMM:
+ case DDR3_SPD_MODULETYPE_SO_DIMM:
+ case DDR3_SPD_MODULETYPE_MICRO_DIMM:
+ case DDR3_SPD_MODULETYPE_MINI_UDIMM:
+ /* Unbuffered DIMMs */
+ pdimm->registered_dimm = 0;
+ pdimm->mirrored_dimm = spd->mod_section.unbuffered.addr_mapping & 0x1;
break;
default:
- printf("unknown dimm_type 0x%02X\n", spd->module_type);
+ printf("unknown module_type 0x%02X\n", spd->module_type);
return 1;
}
@@ -303,16 +309,5 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
pdimm->tFAW_ps = (((spd->tFAW_msb & 0xf) << 8) | spd->tFAW_min)
* mtb_ps;
- /*
- * We need check the address mirror for unbuffered DIMM
- * If SPD indicate the address map mirror, The DDR controller
- * need care it.
- */
- if ((spd->module_type == SPD_MODULETYPE_UDIMM) ||
- (spd->module_type == SPD_MODULETYPE_SODIMM) ||
- (spd->module_type == SPD_MODULETYPE_MICRODIMM) ||
- (spd->module_type == SPD_MODULETYPE_MINIUDIMM))
- pdimm->mirrored_dimm = spd->mod_section.unbuffered.addr_mapping & 0x1;
-
return 0;
}
diff --git a/common/ddr_spd.c b/common/ddr_spd.c
index a7a30de..7a388bb 100644
--- a/common/ddr_spd.c
+++ b/common/ddr_spd.c
@@ -18,7 +18,7 @@ spd_check(const u8 *buf, u8 spd_rev, u8 spd_cksum)
/*
* Check SPD revision supported
- * Rev 1.2 or less supported by this code
+ * Rev 1.X or less supported by this code
*/
if (spd_rev >= 0x20) {
printf("SPD revision %02X not supported by this code\n",
diff --git a/include/ddr_spd.h b/include/ddr_spd.h
index 710e528..e895d61 100644
--- a/include/ddr_spd.h
+++ b/include/ddr_spd.h
@@ -304,14 +304,24 @@ extern unsigned int ddr3_spd_check(const ddr3_spd_eeprom_t *spd);
#define SPD_MEMTYPE_DDR2_FBDIMM_PROBE (0x0A)
#define SPD_MEMTYPE_DDR3 (0x0B)
-/*
- * Byte 3 Key Byte / Module Type for DDR3 SPD
- */
-#define SPD_MODULETYPE_RDIMM (0x01)
-#define SPD_MODULETYPE_UDIMM (0x02)
-#define SPD_MODULETYPE_SODIMM (0x03)
-#define SPD_MODULETYPE_MICRODIMM (0x04)
-#define SPD_MODULETYPE_MINIRDIMM (0x05)
-#define SPD_MODULETYPE_MINIUDIMM (0x06)
+/* DIMM Type for DDR2 SPD (according to v1.3) */
+#define DDR2_SPD_DIMMTYPE_UNDEFINED (0x00)
+#define DDR2_SPD_DIMMTYPE_RDIMM (0x01)
+#define DDR2_SPD_DIMMTYPE_UDIMM (0x02)
+#define DDR2_SPD_DIMMTYPE_SO_DIMM (0x04)
+#define DDR2_SPD_DIMMTYPE_72B_SO_CDIMM (0x06)
+#define DDR2_SPD_DIMMTYPE_72B_SO_RDIMM (0x07)
+#define DDR2_SPD_DIMMTYPE_MICRO_DIMM (0x08)
+#define DDR2_SPD_DIMMTYPE_MINI_RDIMM (0x10)
+#define DDR2_SPD_DIMMTYPE_MINI_UDIMM (0x20)
+
+/* Byte 3 Key Byte / Module Type for DDR3 SPD */
+#define DDR3_SPD_MODULETYPE_MASK (0x0f)
+#define DDR3_SPD_MODULETYPE_RDIMM (0x01)
+#define DDR3_SPD_MODULETYPE_UDIMM (0x02)
+#define DDR3_SPD_MODULETYPE_SO_DIMM (0x03)
+#define DDR3_SPD_MODULETYPE_MICRO_DIMM (0x04)
+#define DDR3_SPD_MODULETYPE_MINI_RDIMM (0x05)
+#define DDR3_SPD_MODULETYPE_MINI_UDIMM (0x06)
#endif /* _DDR_SPD_H_ */
--
1.7.2.3
More information about the U-Boot
mailing list