[U-Boot] [PATCH 1/1] MX5:MX53: support for freescale MX53LOCO board

[Liu Hui-R64343]

Hi, Stefano, 

>-----Original Message-----
>From: Stefano Babic [mailto:sbabic at denx.de]
>Sent: Monday, February 21, 2011 8:46 PM
>To: Liu Hui-R64343
>Cc: u-boot at lists.denx.de; sbabic at denx.de
>Subject: Re: [U-Boot][PATCH 1/1] MX5:MX53: support for freescale MX53LOCO
>board
>
>On 02/21/2011 11:15 AM, Jason Liu wrote:
>
>Hi Jason,
>
>
>>
>+################################################################
>#####
>> +####
>> diff --git a/board/freescale/mx53loco/config.mk
>> b/board/freescale/mx53loco/config.mk
>> new file mode 100644
>> index 0000000..ec0c66c
>
>As I discovered myself, usage of config.mk is discouraged and it should be
>removed and it is not accepted anymore for new boards. Instead of that, it is
>possible to add CONFIG_ options in boards.cfg.

OK, do you know why config.mk is discouraged?

>
>I have already sent changes for imx51evk, as example for the imx5 boards.
>However, I sent them when window was already closed, and I merged them
>on the next branch of u-boot-imx. You will find these patches in archive also
>as:

Can I based on next of u-boot-imx to submit new patches since master branch
Of uboot does not have it?

>
>[PATCH 1/2] Makefile: change rule to build IMX image [PATCH 2/2] MX51:
>drop config.mk from mx51evk
>
>You can take a look at them to see how to drop the config.mk file.

OK, thanks for the information. I will look at it and check my new version patch.

>
>Best regards,
>Stefano Babic
>
>--
>=================================================================
>====
>DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
>=================================================================
>====