[U-Boot] [PATCH v6 1/7] those files are jz4740 base files

Xiangfu Liu xiangfu at openmobilefree.net
Mon Feb 28 07:57:08 CET 2011


those files are jz4740 base files

  this xburst jz4740 cpu have one feature is Boot From USB, there is a 
  small rom in jz4740, the cpu can boot to this small rom, then init cpu 
  and USB module, then we can send 8KB bin file to the cpu cache by using 
  'xbboot' or 'usbboot', Debian package named xburst-tools.

for more info about Ingenic Xburst JZ4740
  http://www.ingenic.cn/eng/default.aspx
  http://www.linux-mips.org/wiki/Ingenic
  http://en.qi-hardware.com

Signed-off-by: Xiangfu Liu <xiangfu at openmobilefree.net>
Acked-by: Daniel <zpxu at ingenic.cn>
---
Changes for v2:
   - add jz4740 soc description

Changes for v3:
   - remove the ENDIANNESS in config.mk
   - don't breaks the 80-charcter-wide rule
   - get rid of #if 0
   - use proper I/O accessors to access registers.
   - remove C++ comments, cleanup code style.

Changes for v6:
   - delete all base + offset. using C struct and proper I/O accressors

 arch/mips/cpu/xburst/Makefile    |   50 +++
 arch/mips/cpu/xburst/config.mk   |   33 ++
 arch/mips/cpu/xburst/cpu.c       |  160 ++++++++
 arch/mips/cpu/xburst/jz4740.c    |  264 ++++++++++++
 arch/mips/cpu/xburst/jz_serial.c |  114 +++++
 arch/mips/cpu/xburst/start.S     |  160 ++++++++
 arch/mips/cpu/xburst/start_spl.S |   63 +++
 arch/mips/cpu/xburst/timer.c     |  167 ++++++++
 arch/mips/cpu/xburst/usbboot.S   |  841 ++++++++++++++++++++++++++++++++++++++
 9 files changed, 1852 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/cpu/xburst/Makefile
 create mode 100644 arch/mips/cpu/xburst/config.mk
 create mode 100644 arch/mips/cpu/xburst/cpu.c
 create mode 100644 arch/mips/cpu/xburst/jz4740.c
 create mode 100644 arch/mips/cpu/xburst/jz_serial.c
 create mode 100644 arch/mips/cpu/xburst/start.S
 create mode 100644 arch/mips/cpu/xburst/start_spl.S
 create mode 100644 arch/mips/cpu/xburst/timer.c
 create mode 100644 arch/mips/cpu/xburst/usbboot.S

diff --git a/arch/mips/cpu/xburst/Makefile b/arch/mips/cpu/xburst/Makefile
new file mode 100644
index 0000000..a9a6e77
--- /dev/null
+++ b/arch/mips/cpu/xburst/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(CPU).o
+
+START	= start.o
+SOBJS-y	= 
+COBJS-y = cpu.o timer.o jz_serial.o 
+
+COBJS-$(CONFIG_JZ4740) += jz4740.o
+
+SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+START	:= $(addprefix $(obj),$(START))
+
+all:	$(obj).depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/mips/cpu/xburst/config.mk b/arch/mips/cpu/xburst/config.mk
new file mode 100644
index 0000000..fc9b255
--- /dev/null
+++ b/arch/mips/cpu/xburst/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, <wd at denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+v=$(shell $(AS) --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2)
+MIPSFLAGS:=$(shell \
+if [ "$v" -lt "14" ]; then \
+	echo "-mcpu=4kc"; \
+else \
+	echo "-march=4kc -mtune=4kc"; \
+fi)
+
+MIPSFLAGS += -mabicalls -mips32
+
+PLATFORM_CPPFLAGS += $(MIPSFLAGS)
diff --git a/arch/mips/cpu/xburst/cpu.c b/arch/mips/cpu/xburst/cpu.c
new file mode 100644
index 0000000..5eb047d
--- /dev/null
+++ b/arch/mips/cpu/xburst/cpu.c
@@ -0,0 +1,160 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mipsregs.h>
+#include <asm/cacheops.h>
+#include <asm/reboot.h>
+#include <asm/io.h>
+#include <asm/jz4740.h>
+
+#define cache_op(op,addr)						\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	noreorder				\n"	\
+	"	.set	mips3\n\t				\n"	\
+	"	cache	%0, %1					\n"	\
+	"	.set	pop					\n"	\
+	:								\
+	: "i" (op), "R" (*(unsigned char *)(addr)))
+
+#if !defined (CONFIG_NAND_SPL) && !defined (CONFIG_MSC_SPL) 
+
+void __attribute__((weak)) _machine_restart(void)
+{
+	struct jz4740_wdt *wdt = (struct jz4740_wdt *) JZ4740_WDT_BASE;
+	struct jz4740_tcu *tcu = (struct jz4740_tcu *) JZ4740_TCU_BASE;
+
+	writew((readw(&wdt->tcsr) &
+		~(WDT_TCSR_EXT_EN | WDT_TCSR_RTC_EN | WDT_TCSR_PCK_EN))
+	       | WDT_TCSR_EXT_EN, &wdt->tcsr);
+	/* wdt_select_extalclk() */
+
+	writew((readw(&wdt->tcsr) &
+		~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE64, &wdt->tcsr);
+	/* wdt_select_clk_div64() */
+
+	writew(100, &wdt->tdr); /* wdt_set_data(100) */
+	writew(0, &wdt->tcnt); /* wdt_set_count(0); */
+	writew(TCU_TSSR_WDTSC, &tcu->tscr); /* tcu_start_wdt_clock */
+	writeb(readb(&wdt->tcer) | WDT_TCER_TCEN, &wdt->tcer); /* wdt start */
+
+	while (1)
+		;
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	_machine_restart();
+
+	fprintf(stderr, "*** reset failed ***\n");
+	return 0;
+}
+
+void flush_cache(ulong start_addr, ulong size)
+{
+	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+	unsigned long addr = start_addr & ~(lsize - 1);
+	unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
+
+	for (;addr <= aend;addr += lsize) {
+		cache_op(Hit_Writeback_Inv_D, addr);
+		cache_op(Hit_Invalidate_I, addr);
+	}
+}
+
+void flush_dcache_range(ulong start_addr, ulong stop)
+{
+	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+	unsigned long addr = start_addr & ~(lsize - 1);
+	unsigned long aend = (stop - 1) & ~(lsize - 1);
+
+	for (;addr <= aend;addr += lsize)
+		cache_op(Hit_Writeback_Inv_D, addr);
+}
+
+void invalidate_dcache_range(ulong start_addr, ulong stop)
+{
+	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+	unsigned long addr = start_addr & ~(lsize - 1);
+	unsigned long aend = (stop - 1) & ~(lsize - 1);
+
+	for (;addr <= aend;addr += lsize)
+		cache_op(Hit_Invalidate_D, addr);
+}
+
+void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
+{
+	write_c0_entrylo0(low0);
+	write_c0_pagemask(pagemask);
+	write_c0_entrylo1(low1);
+	write_c0_entryhi(hi);
+	write_c0_index(index);
+	tlb_write_indexed();
+}
+
+#endif /* !CONFIG_NAND_SPL  !CONFIG_MSC_SPL */
+
+void flush_icache_all(void)
+{
+	u32 addr, t = 0;
+
+	asm volatile ("mtc0 $0, $28"); /* Clear Taglo */
+	asm volatile ("mtc0 $0, $29"); /* Clear TagHi */
+
+	for (addr = KSEG0; addr < KSEG0 + CONFIG_SYS_ICACHE_SIZE;
+	     addr += CONFIG_SYS_CACHELINE_SIZE) {
+		cache_op(Index_Store_Tag_I, addr);
+	}
+
+	/* invalidate btb */
+	asm volatile (
+		".set mips32\n\t"
+		"mfc0 %0, $16, 7\n\t"
+		"nop\n\t"
+		"ori %0,2\n\t"
+		"mtc0 %0, $16, 7\n\t"
+		".set mips2\n\t"
+		:
+		: "r" (t));
+}
+
+void flush_dcache_all(void)
+{
+	u32 addr;
+
+	for (addr = KSEG0; addr < KSEG0 + CONFIG_SYS_DCACHE_SIZE; 
+	     addr += CONFIG_SYS_CACHELINE_SIZE) {
+		cache_op(Index_Writeback_Inv_D, addr);
+	}
+
+	asm volatile ("sync");
+}
+
+void flush_cache_all(void)
+{
+	flush_dcache_all();
+	flush_icache_all();
+}
diff --git a/arch/mips/cpu/xburst/jz4740.c b/arch/mips/cpu/xburst/jz4740.c
new file mode 100644
index 0000000..aedee52
--- /dev/null
+++ b/arch/mips/cpu/xburst/jz4740.c
@@ -0,0 +1,264 @@
+/*
+ * Jz4740 common routines
+ * Copyright (c) 2006 Ingenic Semiconductor, <jlwei at ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/jz4740.h>
+
+void enable_interrupts(void)
+{
+}
+
+int disable_interrupts(void) 
+{
+	return 0;
+}
+
+/* PLL output clock = EXTAL * NF / (NR * NO)
+ * NF = FD + 2, NR = RD + 2
+ * NO = 1 (if OD = 0), NO = 2 (if OD = 1 or 2), NO = 4 (if OD = 3)
+ */
+void pll_init(void)
+{
+	struct jz4740_cpm * cpm = (struct jz4740_cpm *) JZ4740_CPM_BASE;
+
+	register unsigned int cfcr, plcr1;
+	int n2FR[33] = {
+		0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
+		7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
+		9
+	};
+	int div[5] = {1, 3, 3, 3, 3}; /* divisors of I:S:P:L:M */
+	int nf, pllout2;
+
+	cfcr = CPM_CPCCR_CLKOEN | CPM_CPCCR_PCS |
+		(n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
+		(n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
+		(n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
+		(n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) |
+		(n2FR[div[4]] << CPM_CPCCR_LDIV_BIT);
+
+	pllout2 = (cfcr & CPM_CPCCR_PCS) ? 
+		CONFIG_SYS_CPU_SPEED : (CONFIG_SYS_CPU_SPEED / 2);
+
+	/* Init USB Host clock, pllout2 must be n*48MHz */
+	writel((pllout2 / 48000000 - 1), &cpm->uhccdr);
+
+	nf = CONFIG_SYS_CPU_SPEED * 2 / CONFIG_SYS_EXTAL;
+	plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
+		(0 << CPM_CPPCR_PLLN_BIT) |	/* RD=0, NR=2 */
+		(0 << CPM_CPPCR_PLLOD_BIT) |    /* OD=0, NO=1 */
+		(0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */
+		CPM_CPPCR_PLLEN;                /* enable PLL */
+
+	/* init PLL */
+	writel(cfcr, &cpm->cpccr);
+	writel(plcr1, &cpm->cppcr);
+}
+
+
+void sdram_init(void)
+{
+	struct jz4740_emc * emc = (struct jz4740_emc *) JZ4740_EMC_BASE;
+
+	register unsigned int dmcr0, dmcr, sdmode, tmp, cpu_clk, mem_clk, ns;
+
+	unsigned int cas_latency_sdmr[2] = {
+		EMC_SDMR_CAS_2,
+		EMC_SDMR_CAS_3,
+	};
+
+	unsigned int cas_latency_dmcr[2] = {
+		1 << EMC_DMCR_TCL_BIT,	/* CAS latency is 2 */
+		2 << EMC_DMCR_TCL_BIT	/* CAS latency is 3 */
+	};
+
+	int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+	cpu_clk = CONFIG_SYS_CPU_SPEED;
+	mem_clk = cpu_clk * 
+		div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()];
+
+	writel(0, &emc->bcr);	/* Disable bus release */
+	writew(0, &emc->rtcsr);	/* Disable clock for counting */
+
+	/* Fault DMCR value for mode register setting*/
+#define SDRAM_ROW0    11
+#define SDRAM_COL0     8
+#define SDRAM_BANK40   0
+
+	dmcr0 = ((SDRAM_ROW0 - 11) << EMC_DMCR_RA_BIT) |
+		((SDRAM_COL0 - 8) << EMC_DMCR_CA_BIT) |
+		(SDRAM_BANK40 << EMC_DMCR_BA_BIT) |
+		(SDRAM_BW16 << EMC_DMCR_BW_BIT) | EMC_DMCR_EPIN |
+		cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
+
+	/* Basic DMCR value */
+	dmcr = ((SDRAM_ROW - 11) << EMC_DMCR_RA_BIT) |
+		((SDRAM_COL - 8) << EMC_DMCR_CA_BIT) |
+		(SDRAM_BANK4 << EMC_DMCR_BA_BIT) |
+		(SDRAM_BW16 << EMC_DMCR_BW_BIT) | EMC_DMCR_EPIN |
+		cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
+
+	/* SDRAM timimg */
+	ns = 1000000000 / mem_clk;
+	tmp = SDRAM_TRAS/ns;
+	if (tmp < 4) 
+		tmp = 4;
+	if (tmp > 11) 
+		tmp = 11;
+	dmcr |= ((tmp-4) << EMC_DMCR_TRAS_BIT);
+	tmp = SDRAM_RCD/ns;
+
+	if (tmp > 3) 
+		tmp = 3;
+	dmcr |= (tmp << EMC_DMCR_RCD_BIT);
+	tmp = SDRAM_TPC/ns;
+
+	if (tmp > 7) 
+		tmp = 7;
+	dmcr |= (tmp << EMC_DMCR_TPC_BIT);
+	tmp = SDRAM_TRWL/ns;
+
+	if (tmp > 3) 
+		tmp = 3;
+	dmcr |= (tmp << EMC_DMCR_TRWL_BIT);
+	tmp = (SDRAM_TRAS + SDRAM_TPC)/ns;
+
+	if (tmp > 14) 
+		tmp = 14;
+	dmcr |= (((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT);
+
+	/* SDRAM mode value */
+	sdmode = EMC_SDMR_BT_SEQ | 
+		 EMC_SDMR_OM_NORMAL |
+		 EMC_SDMR_BL_4 | 
+		 cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)];
+
+	/* Stage 1. Precharge all banks by writing
+	 * SDMR with DMCR.MRSET=0 */
+	writel(dmcr, &emc->dmcr);
+	writeb(0, JZ4740_EMC_SDMR0 | sdmode);
+
+	/* Wait for precharge, > 200us */
+	tmp = (cpu_clk / 1000000) * 1000;
+	while (tmp--)
+		;
+
+	/* Stage 2. Enable auto-refresh */
+	writel(dmcr | EMC_DMCR_RFSH, &emc->dmcr);
+
+	tmp = SDRAM_TREF / ns;
+	tmp = tmp/64 + 1;
+	if (tmp > 0xff) 
+		tmp = 0xff;
+	writew(tmp, &emc->rtcor);
+	writew(0, &emc->rtcnt);
+	/* Divisor is 64, CKO/64 */
+	writew(EMC_RTCSR_CKS_64, &emc->rtcsr);
+
+	/* Wait for number of auto-refresh cycles */
+	tmp = (cpu_clk / 1000000) * 1000;
+	while (tmp--)
+		;
+
+ 	/* Stage 3. Mode Register Set */
+	writel(dmcr0 | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr);
+	writeb(0, JZ4740_EMC_SDMR0 | sdmode);
+
+        /* Set back to basic DMCR value */
+	writel(dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr);
+
+	/* everything is ok now */
+}
+
+#ifndef CONFIG_NAND_SPL
+DECLARE_GLOBAL_DATA_PTR;
+
+static void calc_clocks(void)
+{
+	unsigned int pllout;
+	unsigned int div[10] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+	pllout = __cpm_get_pllout();
+
+	gd->cpu_clk = pllout / div[__cpm_get_cdiv()];
+	gd->sys_clk = pllout / div[__cpm_get_hdiv()];
+	gd->per_clk = pllout / div[__cpm_get_pdiv()];
+	gd->mem_clk = pllout / div[__cpm_get_mdiv()];
+	gd->dev_clk = CONFIG_SYS_EXTAL;
+}
+
+static void rtc_init(void)
+{
+	struct jz4740_rtc *rtc = (struct jz4740_rtc *) JZ4740_RTC_BASE;
+
+	while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
+		;
+	writel(readl(&rtc->rcr) | RTC_RCR_AE, &rtc->rcr); /* enable alarm */
+
+	while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
+		;
+	writel(0x00007fff, &rtc->rgr); /* type value */
+
+	while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
+		;
+	writel(0x0000ffe0, &rtc->hwfcr); /* Power on delay 2s */
+
+	while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
+		;
+	writel(0x00000fe0, &rtc->hrcr); /* reset delay 125ms */
+}
+
+/* U-Boot common routines */
+phys_size_t initdram(int board_type)
+{
+	struct jz4740_emc * emc = (struct jz4740_emc *) JZ4740_EMC_BASE;
+
+	u32 dmcr;
+	u32 rows, cols, dw, banks;
+	ulong size;
+
+	dmcr = readl(&emc->dmcr);
+	rows = 11 + ((dmcr & EMC_DMCR_RA_MASK) >> EMC_DMCR_RA_BIT);
+	cols = 8 + ((dmcr & EMC_DMCR_CA_MASK) >> EMC_DMCR_CA_BIT);
+	dw = (dmcr & EMC_DMCR_BW) ? 2 : 4;
+	banks = (dmcr & EMC_DMCR_BA) ? 4 : 2;
+
+	size = (1 << (rows + cols)) * dw * banks;
+
+	return size;
+}
+
+/* jz4740 board init routine */
+int jzsoc_init(void)
+{
+#ifndef CONFIG_NAND_U_BOOT
+	pll_init();	/* init PLL */
+	sdram_init();	/* init sdram memory */
+#endif
+	calc_clocks();	/* calc the clocks */
+	rtc_init();	/* init rtc on any reset */
+
+	return 0;
+}
+
+#endif	/* CONFIG_NAND_SPL */
diff --git a/arch/mips/cpu/xburst/jz_serial.c b/arch/mips/cpu/xburst/jz_serial.c
new file mode 100644
index 0000000..65ce993
--- /dev/null
+++ b/arch/mips/cpu/xburst/jz_serial.c
@@ -0,0 +1,114 @@
+/*
+ * Jz4740 UART support
+ * Copyright (c) 2011
+ * Qi Hardware, Xiangfu Liu <xiangfu at sharism.cc>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/jz4740.h>
+ 
+/*
+ * serial_init - initialize a channel
+ *
+ * This routine initializes the number of data bits, parity
+ * and set the selected baud rate. Interrupts are disabled.
+ * Set the modem control signals if the option is selected.
+ *
+ * RETURNS: N/A
+ */
+struct jz4740_uart *uart = (struct jz4740_uart *) CONFIG_SYS_UART_BASE;
+
+int serial_init (void)
+{
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+
+	/* Disable port interrupts while changing hardware */
+	writeb(0, &uart->dlhr_ier);
+
+	/* Disable UART unit function */
+	writeb(~UART_FCR_UUE, &uart->iir_fcr);
+
+	/* Set both receiver and transmitter in UART mode (not SIR) */
+	writeb(~(SIRCR_RSIRE | SIRCR_TSIRE), &uart->isr);
+
+	/* Set databits, stopbits and parity.
+	 * (8-bit data, 1 stopbit, no parity) */
+	writeb(UART_LCR_WLEN_8 | UART_LCR_STOP_1, &uart->lcr);
+
+	/* Set baud rate */
+	serial_setbrg();
+
+	/* Enable UART unit, enable and clear FIFO */
+	writeb(UART_FCR_UUE | UART_FCR_FE | UART_FCR_TFLS | UART_FCR_RFLS, 
+	       &uart->iir_fcr);
+#endif
+	return 0;
+}
+
+void serial_setbrg (void)
+{
+	u32 baud_div, tmp;
+
+	baud_div = CONFIG_SYS_EXTAL / 16 / CONFIG_BAUDRATE;
+
+	tmp = readb(&uart->lcr);
+	tmp |= UART_LCR_DLAB;
+	writeb(tmp, &uart->lcr);
+
+	writeb((baud_div >> 8) & 0xff, &uart->dlhr_ier);
+	writeb(baud_div & 0xff, &uart->rbr_thr_dllr);
+
+	tmp &= ~UART_LCR_DLAB;
+	writeb(tmp, &uart->lcr);
+}
+
+int serial_tstc (void)
+{
+	if (readb(&uart->lsr) & UART_LSR_DR)
+		return (1);
+
+	return 0;
+}
+
+void serial_putc (const char c)
+{
+	if (c == '\n') 
+		serial_putc ('\r');
+
+	/* Wait for fifo to shift out some bytes */
+	while (!((readb(&uart->lsr) & (UART_LSR_TDRQ | UART_LSR_TEMT)) == 0x60))
+		;
+
+	writeb((u8)c, &uart->rbr_thr_dllr);
+}
+
+int serial_getc (void)
+{
+	while (!serial_tstc())
+		;
+
+	return readb(&uart->rbr_thr_dllr);
+}
+
+void serial_puts (const char *s)
+{
+	while (*s)
+		serial_putc (*s++);
+}
diff --git a/arch/mips/cpu/xburst/start.S b/arch/mips/cpu/xburst/start.S
new file mode 100644
index 0000000..f52e3e8
--- /dev/null
+++ b/arch/mips/cpu/xburst/start.S
@@ -0,0 +1,160 @@
+/*
+ *  Startup Code for MIPS32 XBURST CPU-core
+ *
+ *  Copyright (c) 2010 Xiangfu Liu <xiangfu at sharism.cc>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/cacheops.h>
+
+	.set noreorder
+
+	.globl _start
+	.text
+_start:
+	/* Initialize GOT pointer */
+	bal     1f
+	nop
+	.word   _GLOBAL_OFFSET_TABLE_
+1:
+	lw      gp, 0(ra) 
+	li      sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET 
+
+	la	t9, board_init_f
+	jr	t9
+	nop
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * a0 = addr_sp
+ * a1 = gd
+ * a2 = destination address
+ */
+	.globl	relocate_code
+	.ent	relocate_code
+relocate_code:
+	move	sp, a0		/* Set new stack pointer	*/
+
+	li	t0, CONFIG_SYS_MONITOR_BASE
+	la	t3, in_ram
+	lw	t2, -12(t3)	/* t2 <-- uboot_end_data	*/
+	move	t1, a2
+
+	/*
+	 * Fix GOT pointer:
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+	 */
+	move	t6, gp
+	sub	gp, CONFIG_SYS_MONITOR_BASE
+	add	gp, a2			/* gp now adjusted	*/
+	sub	t6, gp, t6		/* t6 <-- relocation offset*/
+
+	/*
+	 * t0 = source address
+	 * t1 = target address
+	 * t2 = source end address
+	 */
+1:
+	lw	t3, 0(t0)
+	sw	t3, 0(t1)
+	addu	t0, 4
+	ble	t0, t2, 1b
+	addu	t1, 4			/* delay slot		*/
+
+	/* If caches were enabled, we would have to flush them here.
+	 * flush d-cache */
+	.set	push
+	li	t0, KSEG0
+	addi	t1, t0, CONFIG_SYS_DCACHE_SIZE
+2:
+	cache	Index_Writeback_Inv_D, 0(t0)
+	bne	t0, t1, 2b
+	addi	t0, CONFIG_SYS_CACHELINE_SIZE
+
+	sync
+
+	/* flush i-cache */
+	li	t0, KSEG0
+	addi	t1, t0, CONFIG_SYS_ICACHE_SIZE
+3:
+	cache	Index_Invalidate_I, 0(t0)
+	bne	t0, t1, 3b
+	addi	t0, CONFIG_SYS_CACHELINE_SIZE
+
+	/* Invalidate BTB */
+	mfc0	t0, CP0_CONFIG, 7
+	nop
+	ori	t0, 2
+	mtc0	t0, CP0_CONFIG, 7
+	nop
+
+	.set	pop
+
+	/* Jump to where we've relocated ourselves.
+	 */
+	addi	t0, a2, in_ram - _start
+	jr	t0
+	nop
+
+	.word	uboot_end_data
+	.word	uboot_end
+	.word	num_got_entries
+
+in_ram:
+	/* Now we want to update GOT  */
+	lw	t3, -4(t0)	/* t3 <-- num_got_entries	*/
+	addi	t4, gp, 8	/* Skipping first two entries.	*/
+	li	t2, 2
+1:
+	lw	t1, 0(t4)
+	beqz	t1, 2f
+	add	t1, t6
+	sw	t1, 0(t4)
+2:
+	addi	t2, 1
+	blt	t2, t3, 1b
+	addi	t4, 4		/* delay slot			*/
+
+	/* Clear BSS  */
+	lw	t1, -12(t0)	/* t1 <-- uboot_end_data	*/
+	lw	t2, -8(t0)	/* t2 <-- uboot_end		*/
+	add	t1, t6		/* adjust pointers		*/
+	add	t2, t6
+
+	sub	t1, 4
+1:	addi	t1, 4
+	bltl	t1, t2, 1b
+	sw	zero, 0(t1)	/* delay slot			*/
+
+	move	a0, a1
+	la	t9, board_init_r
+	jr	t9
+	move	a1, a2		/* delay slot			*/
+
+	.end	relocate_code
diff --git a/arch/mips/cpu/xburst/start_spl.S b/arch/mips/cpu/xburst/start_spl.S
new file mode 100644
index 0000000..f775e3a
--- /dev/null
+++ b/arch/mips/cpu/xburst/start_spl.S
@@ -0,0 +1,63 @@
+/*
+ *  Startup Code for MIPS32 XBURST CPU-core
+ *
+ *  Copyright (c) 2010 Xiangfu Liu <xiangfu at sharism.cc>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 3 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+	
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/cacheops.h>
+
+#include <asm/jz4740.h>
+
+	.set noreorder
+	
+	.globl _start
+	.text
+_start:
+	.word JZ4740_NANDBOOT_CFG /* fetched during NAND Boot */
+reset:	
+	/* 
+	 * STATUS register
+	 * CU0=UM=EXL=IE=0, BEV=ERL=1, IP2~7=1
+	 */
+	li	t0, 0x0040FC04
+	mtc0	t0, CP0_STATUS
+	/* CAUSE register
+	 * IV=1, use the specical interrupt vector (0x200) */
+	li	t1, 0x00800000
+	mtc0	t1, CP0_CAUSE
+	
+	bal     1f
+	nop
+	.word   _GLOBAL_OFFSET_TABLE_
+1:
+	move    gp, ra
+	lw      t1, 0(ra)
+	move	gp, t1
+
+	la	sp, 0x80004000
+	la	t9, nand_boot
+	j	t9
+	nop
diff --git a/arch/mips/cpu/xburst/timer.c b/arch/mips/cpu/xburst/timer.c
new file mode 100644
index 0000000..4472f8e
--- /dev/null
+++ b/arch/mips/cpu/xburst/timer.c
@@ -0,0 +1,167 @@
+/*
+ *  Copyright (c) 2006
+ *  Ingenic Semiconductor, <jlwei at ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+
+#include <asm/jz4740.h>
+
+#define TIMER_CHAN  0
+#define TIMER_FDATA 0xffff  /* Timer full data value */
+
+void   reset_timer_masked      (void);
+ulong  get_timer_masked        (void);
+void   udelay_masked           (unsigned long usec);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct jz4740_tcu *tcu = (struct jz4740_tcu *) JZ4740_TCU_BASE;
+
+/*
+ * timer without interrupts
+ */
+int timer_init(void)
+{
+	writew(TCU_TCSR_PRESCALE256 | TCU_TCSR_EXT_EN, &tcu->tcsr0);
+
+	writew(0, &tcu->tcnt0);
+	writew(0, &tcu->tdhr0);
+	writew(TIMER_FDATA, &tcu->tdfr0);
+
+	/* mask irqs */
+	writel((1 << TIMER_CHAN) | (1 << (TIMER_CHAN + 16)), &tcu->tmsr);
+	writel((1 << TIMER_CHAN), &tcu->tscr);/* enable timer clock */
+	writeb((1 << TIMER_CHAN), &tcu->tesr); /* start counting up */
+
+	gd->lastinc = 0;
+	gd->tbl = 0;
+
+	return 0;
+}
+
+void reset_timer(void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked () - base;
+}
+
+void set_timer(ulong t)
+{
+	gd->tbl = t;
+}
+
+void __udelay (unsigned long usec)
+{
+	ulong tmo,tmp;
+
+	/* normalize */
+	if (usec >= 1000) {
+		tmo = usec / 1000;
+		tmo *= CONFIG_SYS_HZ;
+		tmo /= 1000;
+	} else {
+		if (usec >= 1) {
+			tmo = usec * CONFIG_SYS_HZ;
+			tmo /= (1000 * 1000);
+		} else
+			tmo = 1;
+	}
+
+	/* check for rollover during this delay */
+	tmp = get_timer (0);
+	if ((tmp + tmo) < tmp )
+		reset_timer_masked();  /* timer would roll over */
+	else
+		tmo += tmp;
+
+	while (get_timer_masked () < tmo)
+		;
+}
+
+void reset_timer_masked (void)
+{
+	/* reset time */
+	gd->lastinc = readw(&tcu->tcnt0);
+	gd->tbl = 0;
+}
+
+ulong get_timer_masked (void)
+{
+	ulong now = readw(&tcu->tcnt0);
+
+	if (gd->lastinc <= now)
+		gd->tbl += (now - gd->lastinc);/* normal mode */
+	else
+		gd->tbl += TIMER_FDATA + now - gd->lastinc;/* we have an overflow ... */
+
+	gd->lastinc = now;
+
+	return gd->tbl;
+}
+
+void udelay_masked (unsigned long usec)
+{
+	ulong tmo;
+	ulong endtime;
+	signed long diff;
+
+	/* normalize */
+	if (usec >= 1000) {
+		tmo = usec / 1000;
+		tmo *= CONFIG_SYS_HZ;
+		tmo /= 1000;
+	} else {
+		if (usec > 1) {
+			tmo = usec * CONFIG_SYS_HZ;
+			tmo /= (1000*1000);
+		} else
+			tmo = 1;
+	}
+
+	endtime = get_timer_masked () + tmo;
+
+	do {
+		ulong now = get_timer_masked ();
+		diff = endtime - now;
+	} while (diff >= 0);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On MIPS it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On MIPS it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/arch/mips/cpu/xburst/usbboot.S b/arch/mips/cpu/xburst/usbboot.S
new file mode 100644
index 0000000..97fcbbf
--- /dev/null
+++ b/arch/mips/cpu/xburst/usbboot.S
@@ -0,0 +1,841 @@
+/*
+ *  for jz4740 usb boot
+ *
+ *  Copyright (c) 2009 Author: <jlwei at ingenic.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+    .set noreorder
+    .globl usb_boot
+    .text
+
+/*
+ * Both NAND and USB boot load data to D-Cache first, then transfer
+ * data from D-Cache to I-Cache, and jump to execute the code in I-Cache.
+ * So init caches first and then dispatch to a proper boot routine.
+ */
+
+.macro load_addr reg addr
+	li \reg, 0x80000000
+	addiu \reg, \reg, \addr
+	la $2, usbboot_begin
+	subu \reg, \reg, $2
+.endm
+
+usb_boot:
+	/* Initialize PLL: set ICLK to 84MHz and HCLK to 42MHz. */
+	la	$9, 0xB0000000		/* CPCCR: Clock Control Register */
+	la	$8, 0x42041110		/* I:S:M:P=1:2:2:2 */
+	sw	$8, 0($9)
+
+	la	$9, 0xB0000010		/* CPPCR: PLL Control Register */
+	la	$8, 0x06000120		/* M=12 N=0 D=0 CLK=12*(M+2)/(N+2) */
+	sw	$8, 0($9)
+
+	mtc0	$0, $26			/* CP0_ERRCTL, restore WST reset state */
+	nop
+
+	mtc0	$0, $16			/* CP0_CONFIG */
+	nop
+
+	/* Relocate code to beginning of the ram */
+
+	la $2, usbboot_begin
+	la $3, usbboot_end
+	li $4, 0x80000000
+
+1:
+	lw $5, 0($2)
+	sw $5, 0($4)
+	addiu $2, $2, 4
+	bne $2, $3, 1b
+	addiu $4, $4, 4
+
+	li $2, 0x80000000
+	ori $3, $2, 0
+	addiu $3, $3, usbboot_end
+	la $4, usbboot_begin
+	subu $3, $3, $4
+
+
+2:
+	cache	0x0, 0($2)		/* Index_Invalidate_I */
+	cache	0x1, 0($2)		/* Index_Writeback_Inv_D */
+	addiu	$2, $2, 32
+	subu $4, $3, $2
+	bgtz	$4, 2b
+	nop
+
+	load_addr $3, usb_boot_return
+
+	jr $3
+
+usbboot_begin:
+
+init_caches:
+	li	$2, 3			/* cacheable for kseg0 access */
+	mtc0	$2, $16			/* CP0_CONFIG */
+	nop
+
+	li	$2, 0x20000000		/* enable idx-store-data cache insn */
+	mtc0	$2, $26			/* CP0_ERRCTL */
+
+	ori	$2, $28, 0		/* start address */
+	ori	$3, $2, 0x3fe0		/* end address, total 16KB */
+	mtc0	$0, $28, 0		/* CP0_TAGLO */
+	mtc0	$0, $28, 1		/* CP0_DATALO */
+cache_clear_a_line:
+	cache	0x8, 0($2)		/* Index_Store_Tag_I */
+	cache	0x9, 0($2)		/* Index_Store_Tag_D */
+	bne	$2, $3, cache_clear_a_line
+	addiu	$2, $2, 32		/* increment CACHE_LINE_SIZE */
+
+	ori	$2, $28, 0		/* start address */
+	ori	$3, $2, 0x3fe0		/* end address, total 16KB */
+	la	$4, 0x1ffff000		/* physical address and 4KB page mask */
+cache_alloc_a_line:
+	and	$5, $2, $4
+	ori	$5, $5, 1		/* V bit of the physical tag */
+	mtc0	$5, $28, 0		/* CP0_TAGLO */
+	cache	0x8, 0($2)		/* Index_Store_Tag_I */
+	cache	0x9, 0($2)		/* Index_Store_Tag_D */
+	bne	$2, $3, cache_alloc_a_line
+	addiu	$2, $2, 32		/* increment CACHE_LINE_SIZE */
+
+	nop
+	nop
+	nop
+	/*
+	 * Transfer data from dcache to icache, then jump to icache.
+	 * Input parameters:
+	 * $19: data length in bytes
+	 * $20: jump target address
+	 */
+xfer_d2i:
+
+	ori	$8, $20, 0
+	addu	$9, $8, $19		/* total 16KB */
+
+1:
+	cache	0x0, 0($8)		/* Index_Invalidate_I */
+	cache	0x1, 0($8)		/* Index_Writeback_Inv_D */
+	bne	$8, $9, 1b
+	addiu	$8, $8, 32
+
+	/* flush write-buffer */
+	sync
+
+	/* Invalidate BTB */
+	mfc0	$8, $16, 7		/* CP0_CONFIG */
+	nop
+	ori	$8, 2
+	mtc0	$8, $16, 7
+	nop
+
+	/* Overwrite config to disable ram initalisation */
+	li $2, 0xff
+	sb $2, 20($20)
+
+	jalr	$20
+	nop
+
+icache_return:
+	/*
+	 * User code can return to here after executing itself in 
+	 * icache, by jumping to $31.
+	 */
+	b	usb_boot_return
+	nop
+
+
+usb_boot_return:
+	/* Enable the USB PHY */
+	la	$9, 0xB0000024		/* CPM_SCR */
+	lw	$8, 0($9)
+	ori	$8, 0x40		/* USBPHY_ENABLE */
+	sw	$8, 0($9)
+
+	/* Initialize USB registers */
+	la	$27, 0xb3040000		/* USB registers base address */
+
+	sb	$0, 0x0b($27)		/* INTRUSBE: disable common USB interrupts */
+	sh	$0, 0x06($27)		/* INTRINE: disable EPIN interrutps */
+	sh	$0, 0x08($27)		/* INTROUTE: disable EPOUT interrutps */
+
+	li	$9, 0x61
+	sb	$9, 0x01($27)		/* POWER: HSENAB | SUSPENDM | SOFTCONN */
+
+	/* Initialize USB states */
+	li	$22, 0			/* set EP0 to IDLE state */
+	li	$23, 1			/* no data stage */
+
+	/* Main loop of polling the usb commands */
+usb_command_loop:
+	lbu	$9, 0x0a($27)		/* read INTRUSB */
+	andi	$9, 0x04		/* check USB_INTR_RESET */
+	beqz	$9, check_intr_ep0in
+	nop
+
+ 	/* 1. Handle USB reset interrupt */
+handle_reset_intr:
+	lbu	$9, 0x01($27)		/* read POWER */
+	andi	$9, 0x10		/* test HS_MODE */
+	bnez	$9, _usb_set_maxpktsize
+	li	$9, 512			/* max packet size of HS mode */
+	li	$9, 64			/* max packet size of FS mode */
+
+_usb_set_maxpktsize:
+	li	$8, 1
+	sb	$8, 0x0e($27)		/* set INDEX 1 */
+
+	sh	$9, 0x10($27)		/* INMAXP */
+	sb	$0, 0x13($27)		/* INCSRH */
+	sh	$9, 0x14($27)		/* OUTMAXP */
+	sb	$0, 0x17($27)		/* OUTCSRH */
+
+_usb_flush_fifo:
+	li	$8, 0x48		/* INCSR_CDT && INCSR_FF */
+	sb	$8, 0x12($27)		/* INCSR */
+	li	$8, 0x90		/* OUTCSR_CDT && OUTCSR_FF */
+	sb	$8, 0x16($27)		/* OUTCSR */
+
+	li	$22, 0			/* set EP0 to IDLE state */
+	li	$23, 1			/* no data stage */
+
+	/* 2. Check and handle EP0 interrupt */
+check_intr_ep0in:
+	lhu	$10, 0x02($27)		/* read INTRIN */
+	andi	$9, $10, 0x1		/* check EP0 interrupt */
+	beqz	$9, check_intr_ep1in
+	nop
+
+handle_ep0_intr:
+	sb	$0, 0x0e($27)		/* set INDEX 0 */
+	lbu	$11, 0x12($27)		/* read CSR0 */
+
+	andi	$9, $11, 0x04		/* check SENTSTALL */
+	beqz	$9, _ep0_setupend
+	nop
+
+_ep0_sentstall:
+	andi	$9, $11, 0xdb
+	sb	$9, 0x12($27)		/* clear SENDSTALL and SENTSTALL */
+	li	$22, 0			/* set EP0 to IDLE state */
+
+_ep0_setupend:
+	andi	$9, $11, 0x10		/* check SETUPEND */
+	beqz	$9, ep0_idle_state
+	nop
+
+	ori	$9, $11, 0x80
+	sb	$9, 0x12($27)		/* set SVDSETUPEND */
+	li	$22, 0			/* set EP0 to IDLE state */
+
+ep0_idle_state:
+	bnez	$22, ep0_tx_state
+	nop
+
+	/* 2.1 Handle EP0 IDLE state interrupt */
+	andi	$9, $11, 0x01		/* check OUTPKTRDY */
+	beqz	$9, check_intr_ep1in
+	nop
+
+	/* Read 8-bytes setup packet from the FIFO */
+	lw	$25, 0x20($27)		/* first word of setup packet */
+	lw	$26, 0x20($27)		/* second word of setup packet */
+
+	andi	$9, $25, 0x60		/* bRequestType & USB_TYPE_MASK */
+	beqz	$9, _ep0_std_req
+	nop
+
+	/* 2.1.1 Vendor-specific setup request */
+_ep0_vend_req:
+	li	$22, 0			/* set EP0 to IDLE state */
+	li	$23, 1			/* NoData = 1 */
+
+	andi	$9, $25, 0xff00		/* check bRequest */
+	srl	$9, $9, 8
+	beqz	$9, __ep0_get_cpu_info
+	sub	$8, $9, 0x1
+	beqz	$8, __ep0_set_data_address
+	sub	$8, $9, 0x2
+	beqz	$8, __ep0_set_data_length
+	sub	$8, $9, 0x3
+	beqz	$8, __ep0_flush_caches
+	sub	$8, $9, 0x4
+	beqz	$8, __ep0_prog_start1
+	sub	$8, $9, 0x5
+	beqz	$8, __ep0_prog_start2
+	nop
+	b	_ep0_idle_state_fini	/* invalid request */
+	nop
+
+__ep0_get_cpu_info:
+	load_addr $20, cpu_info_data	/* data pointer to transfer */
+	li	$21, 8			/* bytes left to transfer */
+	li	$22, 1			/* set EP0 to TX state */
+	li	$23, 0			/* NoData = 0 */
+
+	b	_ep0_idle_state_fini
+	nop
+
+__ep0_set_data_address:
+	li	$9, 0xffff0000
+	and	$9, $25, $9
+	andi	$8, $26, 0xffff
+	or	$20, $9, $8		/* data address of next transfer */
+
+	b	_ep0_idle_state_fini
+	nop
+
+__ep0_set_data_length:
+	li	$9, 0xffff0000
+	and	$9, $25, $9
+	andi	$8, $26, 0xffff
+	or	$21, $9, $8		/* data length of next transfer */
+
+	li	$9, 0x48		/* SVDOUTPKTRDY and DATAEND */
+	sb	$9, 0x12($27)		/* CSR0 */
+
+	/* We must write packet to FIFO before EP1-IN interrupt here. */
+	b	handle_epin1_intr
+	nop
+
+__ep0_flush_caches:
+	/* Flush dcache and invalidate icache. */
+	li	$8, 0x80000000
+	addi	$9, $8, 0x3fe0		/* total 16KB */
+
+1:
+	cache	0x0, 0($8)		/* Index_Invalidate_I */
+	cache	0x1, 0($8)		/* Index_Writeback_Inv_D */
+	bne	$8, $9, 1b
+	addiu	$8, $8, 32
+
+	/* flush write-buffer */
+	sync
+
+	/* Invalidate BTB */
+	mfc0	$8, $16, 7		/* CP0_CONFIG */
+	nop
+	ori	$8, 2
+	mtc0	$8, $16, 7
+	nop
+
+	b	_ep0_idle_state_fini
+	nop
+
+__ep0_prog_start1:
+	li	$9, 0x48		/* SVDOUTPKTRDY and DATAEND */
+	sb	$9, 0x12($27)		/* CSR0 */
+
+	li	$9, 0xffff0000
+	and	$9, $25, $9
+	andi	$8, $26, 0xffff
+	or	$20, $9, $8		/* target address */
+
+	b	xfer_d2i
+	li	$19, 0x2000		/* 16KB data length */
+
+__ep0_prog_start2:
+	li	$9, 0x48		/* SVDOUTPKTRDY and DATAEND */
+	sb	$9, 0x12($27)		/* CSR0 */
+
+	li	$9, 0xffff0000
+	and	$9, $25, $9
+	andi	$8, $26, 0xffff
+	or	$20, $9, $8		/* target address */
+
+	jalr	$20			/* jump, and place the return address in $31 */
+	nop
+
+__ep0_prog_start2_return:
+	/* User code can return to here after executing itself, by jumping to $31. */
+	b	usb_boot_return
+	nop
+
+	/* 2.1.2 Standard setup request */
+_ep0_std_req:
+	andi	$12, $25, 0xff00	/* check bRequest */
+	srl	$12, $12, 8
+	sub	$9, $12, 0x05		/* check USB_REQ_SET_ADDRESS */
+	bnez	$9, __ep0_req_set_config
+	nop
+
+	/* Handle USB_REQ_SET_ADDRESS */
+__ep0_req_set_addr:
+	srl	$9, $25, 16		/* get wValue */
+	sb	$9, 0x0($27)		/* set FADDR */
+	li	$23, 1			/* NoData = 1 */
+	b	_ep0_idle_state_fini
+	nop
+
+__ep0_req_set_config:
+	sub	$9, $12, 0x09		/* check USB_REQ_SET_CONFIGURATION */
+	bnez	$9, __ep0_req_get_desc
+	nop
+
+	/* Handle USB_REQ_SET_CONFIGURATION */
+	li	$23, 1			/* NoData = 1 */
+	b	_ep0_idle_state_fini
+	nop
+
+__ep0_req_get_desc:
+	sub	$9, $12, 0x06		/* check USB_REQ_GET_DESCRIPTOR */
+	bnez	$9, _ep0_idle_state_fini
+	li	$23, 1			/* NoData = 1 */
+
+	/* Handle USB_REQ_GET_DESCRIPTOR */
+	li	$23, 0			/* NoData = 0 */
+
+	srl	$9, $25, 24		/* wValue >> 8 */
+	sub	$8, $9, 0x01		/* check USB_DT_DEVICE */
+	beqz	$8, ___ep0_get_dev_desc
+	srl	$21, $26, 16		/* get wLength */
+	sub	$8, $9, 0x02		/* check USB_DT_CONFIG */
+	beqz	$8, ___ep0_get_conf_desc
+	sub	$8, $9, 0x03		/* check USB_DT_STRING */
+	beqz	$8, ___ep0_get_string_desc
+	sub	$8, $9, 0x06		/* check USB_DT_DEVICE_QUALIFIER */
+	beqz	$8, ___ep0_get_dev_qualifier
+	nop
+	b	_ep0_idle_state_fini
+	nop
+
+___ep0_get_dev_desc:
+	load_addr	$20, device_desc	/* data pointer */
+	li	$22, 1			/* set EP0 to TX state */
+	sub	$8, $21, 18
+	blez	$8, _ep0_idle_state_fini /* wLength <= 18 */
+	nop
+	li	$21, 18			/* max length of device_desc */
+	b	_ep0_idle_state_fini
+	nop
+
+___ep0_get_dev_qualifier:
+	load_addr	$20, dev_qualifier	/* data pointer */
+	li	$22, 1			/* set EP0 to TX state */
+	sub	$8, $21, 10
+	blez	$8, _ep0_idle_state_fini /* wLength <= 10 */
+	nop
+	li	$21, 10			/* max length of dev_qualifier */
+	b	_ep0_idle_state_fini
+	nop
+
+___ep0_get_conf_desc:
+	load_addr	$20, config_desc_fs	/* data pointer of FS mode */
+	lbu	$8, 0x01($27)		/* read POWER */
+	andi	$8, 0x10		/* test HS_MODE */
+	beqz	$8, ___ep0_get_conf_desc2
+	nop
+	load_addr $20, config_desc_hs	/* data pointer of HS mode */
+
+___ep0_get_conf_desc2:
+	li	$22, 1			/* set EP0 to TX state */
+	sub	$8, $21, 32
+	blez	$8, _ep0_idle_state_fini /* wLength <= 32 */
+	nop
+	li	$21, 32			/* max length of config_desc */
+	b	_ep0_idle_state_fini
+	nop
+
+___ep0_get_string_desc:
+	li	$22, 1			/* set EP0 to TX state */
+
+	srl	$9, $25, 16		/* wValue & 0xff */
+	andi	$9, 0xff
+
+	sub	$8, $9, 1
+	beqz	$8, ___ep0_get_string_manufacture
+	sub	$8, $9, 2
+	beqz	$8, ___ep0_get_string_product
+	nop
+
+___ep0_get_string_lang_ids:
+	load_addr	$20, string_lang_ids	/* data pointer */
+	b	_ep0_idle_state_fini
+	li	$21, 4			/* data length */
+
+___ep0_get_string_manufacture:
+	load_addr	$20, string_manufacture	/* data pointer */
+	b	_ep0_idle_state_fini
+	li	$21, 16			/* data length */
+
+___ep0_get_string_product:
+	load_addr	$20, string_product	/* data pointer */
+	b	_ep0_idle_state_fini
+	li	$21, 46			/* data length */
+
+_ep0_idle_state_fini:
+	li	$9, 0x40		/* SVDOUTPKTRDY */
+	beqz	$23, _ep0_idle_state_fini2
+	nop
+	ori	$9, $9, 0x08		/* DATAEND */
+_ep0_idle_state_fini2:
+	sb	$9, 0x12($27)		/* CSR0 */
+	beqz	$22, check_intr_ep1in
+	nop
+
+	/* 2.2 Handle EP0 TX state interrupt */
+ep0_tx_state:
+	sub	$9, $22, 1
+	bnez	$9, check_intr_ep1in
+	nop
+
+	sub	$9, $21, 64		/* max packetsize */
+	blez	$9, _ep0_tx_state2	/* data count <= 64 */
+	ori	$19, $21, 0
+	li	$19, 64
+
+_ep0_tx_state2:
+	beqz	$19, _ep0_tx_state3	/* send ZLP */
+	ori	$18, $19, 0		/* record bytes to be transferred */
+	sub	$21, $21, $19		/* decrement data count */
+
+_ep0_fifo_write_loop:
+	lbu	$9, 0($20)		/* read data */
+	sb	$9, 0x20($27)		/* load FIFO */
+	sub	$19, $19, 1		/* decrement counter */
+	bnez	$19, _ep0_fifo_write_loop
+	addi	$20, $20, 1		/* increment data pointer */
+
+	sub	$9, $18, 64		/* max packetsize */
+	beqz	$9, _ep0_tx_state4
+	nop
+
+_ep0_tx_state3:
+	/* transferred bytes < max packetsize */
+	li	$9, 0x0a		/* set INPKTRDY and DATAEND */
+	sb	$9, 0x12($27)		/* CSR0 */
+	li	$22, 0			/* set EP0 to IDLE state */
+	b	check_intr_ep1in
+	nop
+
+_ep0_tx_state4:
+	/* transferred bytes == max packetsize */
+	li	$9, 0x02		/* set INPKTRDY */
+	sb	$9, 0x12($27)		/* CSR0 */
+	b	check_intr_ep1in
+	nop
+
+	/* 3. Check and handle EP1 BULK-IN interrupt */
+check_intr_ep1in:
+	andi	$9, $10, 0x2		/* check EP1 IN interrupt */
+	beqz	$9, check_intr_ep1out
+	nop
+
+handle_epin1_intr:
+	li	$9, 1
+	sb	$9, 0x0e($27)		/* set INDEX 1 */
+	lbu	$9, 0x12($27)		/* read INCSR */
+
+	andi	$8, $9, 0x2		/* check INCSR_FFNOTEMPT */
+	bnez	$8, _epin1_tx_state4
+	nop
+
+_epin1_write_fifo:
+	lhu	$9, 0x10($27)		/* get INMAXP */
+	sub	$8, $21, $9
+	blez	$8, _epin1_tx_state1	/* bytes left <= INMAXP */
+	ori	$19, $21, 0
+	ori	$19, $9, 0
+
+_epin1_tx_state1:
+	beqz	$19, _epin1_tx_state4	/* No data */
+	nop
+
+	sub	$21, $21, $19		/* decrement data count */
+
+	srl	$5, $19, 2		/* # of word */
+	andi	$6, $19, 0x3		/* # of byte */
+	beqz	$5, _epin1_tx_state2
+	nop
+
+_epin1_fifo_write_word:
+	lw	$9, 0($20)		/* read data from source address */
+	sw	$9, 0x24($27)		/* write FIFO */
+	sub	$5, $5, 1		/* decrement counter */
+	bnez	$5, _epin1_fifo_write_word
+	addiu	$20, $20, 4		/* increment dest address */
+
+_epin1_tx_state2:
+	beqz	$6, _epin1_tx_state3
+	nop
+
+_epin1_fifo_write_byte:
+	lbu	$9, 0($20)		/* read data from source address */
+	sb	$9, 0x24($27)		/* write FIFO */
+	sub	$6, $6, 1		/* decrement counter */
+	bnez	$6, _epin1_fifo_write_byte
+	addiu	$20, $20, 1		/* increment dest address */
+
+_epin1_tx_state3:
+	li	$9, 0x1
+	sb	$9, 0x12($27)		/* INCSR, set INPKTRDY */
+
+_epin1_tx_state4:
+
+	/* 4. Check and handle EP1 BULK-OUT interrupt */
+check_intr_ep1out:
+	lhu	$9, 0x04($27)		/* read INTROUT */
+	andi	$9, 0x2
+	beqz	$9, check_status_next
+	nop
+
+handle_epout1_intr:
+	li	$9, 1
+	sb	$9, 0x0e($27)		/* set INDEX 1 */
+
+	lbu	$9, 0x16($27)		/* read OUTCSR */
+	andi	$9, 0x1			/* check OUTPKTRDY */
+	beqz	$9, check_status_next
+	nop
+
+_epout1_read_fifo:
+	lhu	$19, 0x18($27)		/* read OUTCOUNT */
+	srl	$5, $19, 2		/* # of word */
+	andi	$6, $19, 0x3		/* # of byte */
+	beqz	$5, _epout1_rx_state1
+	nop
+
+_epout1_fifo_read_word:
+	lw	$9, 0x24($27)		/* read FIFO */
+	sw	$9, 0($20)		/* store to dest address */
+	sub	$5, $5, 1		/* decrement counter */
+	bnez	$5, _epout1_fifo_read_word
+	addiu	$20, $20, 4		/* increment dest address */
+
+_epout1_rx_state1:
+	beqz	$6, _epout1_rx_state2
+	nop
+
+_epout1_fifo_read_byte:
+	lbu	$9, 0x24($27)		/* read FIFO */
+	sb	$9, 0($20)		/* store to dest address */
+	sub	$6, $6, 1		/* decrement counter */
+	bnez	$6, _epout1_fifo_read_byte
+	addiu	$20, $20, 1		/* increment dest address */
+
+_epout1_rx_state2:
+	sb	$0, 0x16($27)		/* clear OUTPKTRDY */
+
+check_status_next:
+	b	usb_command_loop
+	nop
+
+/* Device/Configuration/Interface/Endpoint/String Descriptors */
+
+	.align	2
+device_desc:
+	.byte	0x12		/* bLength */
+	.byte	0x01		/* bDescriptorType */
+	.byte	0x00		/* bcdUSB */
+	.byte	0x02		/* bcdUSB */
+	.byte	0x00		/* bDeviceClass */
+	.byte	0x00		/* bDeviceSubClass */
+	.byte	0x00		/* bDeviceProtocol */
+	.byte	0x40		/* bMaxPacketSize0 */
+	.byte	0x1a		/* idVendor */
+	.byte	0x60		/* idVendor */
+	.byte	0x40		/* idProduct */
+	.byte	0x47		/* idProduct */
+	.byte	0x00		/* bcdDevice */
+	.byte	0x01		/* bcdDevice */
+	.byte	0x01		/* iManufacturer */
+	.byte	0x02		/* iProduct */
+	.byte	0x00		/* iSerialNumber */
+	.byte	0x01		/* bNumConfigurations */
+
+	.align	2
+dev_qualifier:
+	.byte	0x0a		/* bLength */
+	.byte	0x06		/* bDescriptorType */
+	.byte	0x00		/* bcdUSB */
+	.byte	0x02		/* bcdUSB */
+	.byte	0x00		/* bDeviceClass */
+	.byte	0x00		/* bDeviceSubClass */
+	.byte	0x00		/* bDeviceProtocol */
+	.byte	0x40		/* bMaxPacketSize0 */
+	.byte	0x01		/* bNumConfigurations */
+	.byte	0x00		/* bRESERVED */
+
+	.align	2
+config_desc_hs:
+	.byte	0x09		/* bLength */
+	.byte	0x02		/* bDescriptorType */
+	.byte	0x20		/* wTotalLength */
+	.byte	0x00		/* wTotalLength */
+	.byte	0x01		/* bNumInterfaces */
+	.byte	0x01		/* bConfigurationValue */
+	.byte	0x00		/* iConfiguration */
+	.byte	0xc0		/* bmAttributes */
+	.byte	0x01		/* MaxPower */
+intf_desc_hs:
+	.byte	0x09		/* bLength */
+	.byte	0x04		/* bDescriptorType */
+	.byte	0x00		/* bInterfaceNumber */
+	.byte	0x00		/* bAlternateSetting */
+	.byte	0x02		/* bNumEndpoints */
+	.byte	0xff		/* bInterfaceClass */
+	.byte	0x00		/* bInterfaceSubClass */
+	.byte	0x50		/* bInterfaceProtocol */
+	.byte	0x00		/* iInterface */
+ep1_desc_hs:
+	.byte	0x07		/* bLength */
+	.byte	0x05		/* bDescriptorType */
+	.byte	0x01		/* bEndpointAddress */
+	.byte	0x02		/* bmAttributes */
+	.byte	0x00		/* wMaxPacketSize */
+	.byte	0x02		/* wMaxPacketSize */
+	.byte	0x00		/* bInterval */
+ep2_desc_hs:
+	.byte	0x07		/* bLength */
+	.byte	0x05		/* bDescriptorType */
+	.byte	0x81		/* bEndpointAddress */
+	.byte	0x02		/* bmAttributes */
+	.byte	0x00		/* wMaxPacketSize */
+	.byte	0x02		/* wMaxPacketSize */
+	.byte	0x00		/* bInterval */
+
+	.align	2
+config_desc_fs:
+	.byte	0x09		/* bLength */
+	.byte	0x02		/* bDescriptorType */
+	.byte	0x20		/* wTotalLength */
+	.byte	0x00		/* wTotalLength */
+	.byte	0x01		/* bNumInterfaces */
+	.byte	0x01		/* bConfigurationValue */
+	.byte	0x00		/* iConfiguration */
+	.byte	0xc0		/* bmAttributes */
+	.byte	0x01		/* MaxPower */
+intf_desc_fs:
+	.byte	0x09		/* bLength */
+	.byte	0x04		/* bDescriptorType */
+	.byte	0x00		/* bInterfaceNumber */
+	.byte	0x00		/* bAlternateSetting */
+	.byte	0x02		/* bNumEndpoints */
+	.byte	0xff		/* bInterfaceClass */
+	.byte	0x00		/* bInterfaceSubClass */
+	.byte	0x50		/* bInterfaceProtocol */
+	.byte	0x00		/* iInterface */
+ep1_desc_fs:
+	.byte	0x07		/* bLength */
+	.byte	0x05		/* bDescriptorType */
+	.byte	0x01		/* bEndpointAddress */
+	.byte	0x02		/* bmAttributes */
+	.byte	0x40		/* wMaxPacketSize */
+	.byte	0x00		/* wMaxPacketSize */
+	.byte	0x00		/* bInterval */
+ep2_desc_fs:
+	.byte	0x07		/* bLength */
+	.byte	0x05		/* bDescriptorType */
+	.byte	0x81		/* bEndpointAddress */
+	.byte	0x02		/* bmAttributes */
+	.byte	0x40		/* wMaxPacketSize */
+	.byte	0x00		/* wMaxPacketSize */
+	.byte	0x00		/* bInterval */
+
+	.align	2
+string_lang_ids:
+	.byte	0x04
+	.byte	0x03
+	.byte	0x09
+	.byte	0x04
+
+	.align	2
+string_manufacture:
+	.byte	0x10
+	.byte	0x03
+	.byte	0x49
+	.byte	0x00
+	.byte	0x6e
+	.byte	0x00
+	.byte	0x67
+	.byte	0x00
+	.byte	0x65
+	.byte	0x00
+	.byte	0x6e
+	.byte	0x00
+	.byte	0x69
+	.byte	0x00
+	.byte	0x63
+	.byte	0x00
+
+	.align	2
+string_product:
+	.byte	0x2e
+	.byte	0x03
+	.byte	0x4a
+	.byte	0x00
+	.byte	0x5a
+	.byte	0x00
+	.byte	0x34
+	.byte	0x00
+	.byte	0x37
+	.byte	0x00
+	.byte	0x34
+	.byte	0x00
+	.byte	0x30
+	.byte	0x00
+	.byte	0x20
+	.byte	0x00
+	.byte	0x55
+	.byte	0x00
+	.byte	0x53
+	.byte	0x00
+	.byte	0x42
+	.byte	0x00
+	.byte	0x20
+	.byte	0x00
+	.byte	0x42
+	.byte	0x00
+	.byte	0x6f
+	.byte	0x00
+	.byte	0x6f
+	.byte	0x00
+	.byte	0x74
+	.byte	0x00
+	.byte	0x20
+	.byte	0x00
+	.byte	0x44
+	.byte	0x00
+	.byte	0x65
+	.byte	0x00
+	.byte	0x76
+	.byte	0x00
+	.byte	0x69
+	.byte	0x00
+	.byte	0x63
+	.byte	0x00
+	.byte	0x65
+	.byte	0x00
+
+	.align	2
+cpu_info_data:
+	.byte	0x4a
+	.byte	0x5a
+	.byte	0x34
+	.byte	0x37
+	.byte	0x34
+	.byte	0x30
+	.byte	0x56
+	.byte	0x31
+usbboot_end:
+
+    .set reorder
-- 
1.7.0.4



More information about the U-Boot mailing list