[U-Boot] [PATCH 15/22] omap4: add clock support
Aneesh V
aneesh at ti.com
Mon Feb 28 12:46:24 CET 2011
Add support for:
1. DPLL locking
2. Initialization of clock domains and clock modules
This work draws upon previous work done for x-loader mainly by:
Santosh Shilimkar <santosh.shilimkar at ti.com>
Rajendra Nayak <rnayak at ti.com>
Signed-off-by: Aneesh V <aneesh at ti.com>
---
arch/arm/cpu/armv7/omap4/Makefile | 1 +
arch/arm/cpu/armv7/omap4/board.c | 1 +
arch/arm/cpu/armv7/omap4/clocks.c | 717 +++++++++++++++++++++++++++
arch/arm/include/asm/arch-omap4/clocks.h | 504 +++++++++++++++++++
arch/arm/include/asm/arch-omap4/sys_proto.h | 6 +
arch/arm/include/asm/omap_common.h | 3 +
spl/board/ti/sdp4430/Makefile | 6 +-
7 files changed, 1237 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/cpu/armv7/omap4/clocks.c
create mode 100644 arch/arm/include/asm/arch-omap4/clocks.h
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
index 987dc9d..6154e86 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -30,6 +30,7 @@ SOBJS += lowlevel_init.o
COBJS += board.o
COBJS += mem.o
COBJS += sys_info.o
+COBJS += clocks.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 95b6a96..62a59ad 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -105,6 +105,7 @@ void s_init(void)
{
watchdog_init();
set_mux_conf_regs();
+ prcm_init();
#ifdef CONFIG_PRELOADER
preloader_console_init();
#endif
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
new file mode 100644
index 0000000..317f30f
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -0,0 +1,717 @@
+/*
+ *
+ * Clock initialization for OMAP4
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh at ti.com>
+ *
+ * Based on previous work by:
+ * Santosh Shilimkar <santosh.shilimkar at ti.com>
+ * Rajendra Nayak <rnayak at ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+
+#define abs(x) (((x) < 0) ? ((x)*-1) : (x))
+
+static const u32 sys_clk_array[8] = {
+ 0, /* Uninitialized */
+ 12000000, /* 12 MHz */
+ 13000000, /* 13 MHz */
+ 16800000, /* 16.8 MHz */
+ 19200000, /* 19.2 MHz */
+ 26000000, /* 26 MHz */
+ 27000000, /* 27 MHz */
+ 38400000, /* 38.4 MHz */
+};
+
+static const struct dpll_params core_dpll_params_opp100 = {
+ 0, 0, 1600000, 1, 5, 8, 4, 6, 5
+};
+
+static const struct dpll_params core_dpll_params_opp100_ddr200 = {
+ 0, 0, 1600000, 2, 5, 8, 4, 6, 5
+};
+
+static const struct dpll_params core_dpll_params_es1_l3_190 = {
+ 0, 0, 1523712, 1, 5, 8, 4, 6, 5
+};
+
+static const struct dpll_params per_dpll_params_opp100 = {
+ 0, 0, 1536000, 8, 6, 12, 9, 4, 5
+};
+
+/* TODO - fix MPU mult */
+static const struct dpll_params mpu_dpll_params_600mhz = {
+ 0, 0, 1200000, 1, -1, -1, -1, -1, -1
+};
+
+static const struct dpll_params mpu_dpll_params_1000mhz = {
+ 0, 0, 2000000, 1, -1, -1, -1, -1, -1
+};
+
+static const struct dpll_params usb_dpll_params = {
+ 0, 0, 1920000, 2, -1, -1, -1, -1, -1
+};
+
+static const struct dpll_params iva_dpll_params = {
+ 0, 0, 1862000, -1, -1, 4, 7, -1, -1
+};
+
+static const struct dpll_params abe_dpll_params = {
+ 0, 0, 196608, 1, 1, -1, -1, -1, -1
+};
+
+static const u32 clk_domains_essential[] = {
+ CM_L4PER_CLKSTCTRL,
+ CM_L3INIT_CLKSTCTRL,
+ CM_MEMIF_CLKSTCTRL,
+ CM_L4CFG_CLKSTCTRL,
+ 0
+};
+
+static const u32 clk_domains_non_essential[] = {
+ CM_MPU_M3_CLKSTCTRL,
+ CM_IVAHD_CLKSTCTRL,
+ CM_DSP_CLKSTCTRL,
+ CM_DSS_CLKSTCTRL,
+ CM_SGX_CLKSTCTRL,
+ CM1_ABE_CLKSTCTRL,
+ CM_C2C_CLKSTCTRL,
+ CM_CAM_CLKSTCTRL,
+ CM_DSS_CLKSTCTRL,
+ CM_SDMA_CLKSTCTRL,
+ 0
+};
+
+static const u32 clk_modules_hw_auto_essential[] = {
+ CM_WKUP_GPIO1_CLKCTRL,
+ CM_L4PER_GPIO2_CLKCTRL,
+ CM_L4PER_GPIO3_CLKCTRL,
+ CM_L4PER_GPIO4_CLKCTRL,
+ CM_L4PER_GPIO5_CLKCTRL,
+ CM_L4PER_GPIO6_CLKCTRL,
+ CM_MEMIF_EMIF_1_CLKCTRL,
+ CM_MEMIF_EMIF_2_CLKCTRL,
+ CM_L3INIT_HSUSBOTG_CLKCTRL,
+ CM_L3INIT_USBPHY_CLKCTRL,
+ CM_L4CFG_L4_CFG_CLKCTRL,
+ 0
+};
+
+static const u32 clk_modules_hw_auto_non_essential[] = {
+ CM_MPU_M3_MPU_M3_CLKCTRL,
+ CM_IVAHD_IVAHD_CLKCTRL,
+ CM_IVAHD_SL2_CLKCTRL,
+ CM_DSP_DSP_CLKCTRL,
+ CM_L3_2_GPMC_CLKCTRL,
+ CM_L3INSTR_L3_3_CLKCTRL,
+ CM_L3INSTR_L3_INSTR_CLKCTRL,
+ CM_L3INSTR_INTRCONN_WP1_CLKCTRL,
+ CM_L3INIT_HSI_CLKCTRL,
+ CM_L3INIT_HSUSBTLL_CLKCTRL,
+ 0
+};
+
+static const u32 clk_modules_explicit_en_essential[] = {
+ CM_L4PER_GPTIMER2_CLKCTRL,
+ CM_L3INIT_HSMMC1_CLKCTRL,
+ CM_L3INIT_HSMMC2_CLKCTRL,
+ CM_L4PER_MCSPI1_CLKCTRL,
+ CM_WKUP_GPTIMER1_CLKCTRL,
+ CM_L4PER_I2C1_CLKCTRL,
+ CM_L4PER_I2C2_CLKCTRL,
+ CM_L4PER_I2C3_CLKCTRL,
+ CM_L4PER_I2C4_CLKCTRL,
+ CM_WKUP_WDTIMER2_CLKCTRL,
+ CM_L4PER_UART3_CLKCTRL,
+ 0
+};
+
+static const u32 clk_modules_explicit_en_non_essential[] = {
+ CM1_ABE_AESS_CLKCTRL,
+ CM1_ABE_PDM_CLKCTRL,
+ CM1_ABE_DMIC_CLKCTRL,
+ CM1_ABE_MCASP_CLKCTRL,
+ CM1_ABE_MCBSP1_CLKCTRL,
+ CM1_ABE_MCBSP2_CLKCTRL,
+ CM1_ABE_MCBSP3_CLKCTRL,
+ CM1_ABE_SLIMBUS_CLKCTRL,
+ CM1_ABE_TIMER5_CLKCTRL,
+ CM1_ABE_TIMER6_CLKCTRL,
+ CM1_ABE_TIMER7_CLKCTRL,
+ CM1_ABE_TIMER8_CLKCTRL,
+ CM1_ABE_WDT3_CLKCTRL,
+ CM_L4PER_GPTIMER9_CLKCTRL,
+ CM_L4PER_GPTIMER10_CLKCTRL,
+ CM_L4PER_GPTIMER11_CLKCTRL,
+ CM_L4PER_GPTIMER3_CLKCTRL,
+ CM_L4PER_GPTIMER4_CLKCTRL,
+ CM_L4PER_HDQ1W_CLKCTRL,
+ CM_L4PER_MCBSP4_CLKCTRL,
+ CM_L4PER_MCSPI2_CLKCTRL,
+ CM_L4PER_MCSPI3_CLKCTRL,
+ CM_L4PER_MCSPI4_CLKCTRL,
+ CM_L4PER_MMCSD3_CLKCTRL,
+ CM_L4PER_MMCSD4_CLKCTRL,
+ CM_L4PER_MMCSD5_CLKCTRL,
+ CM_L4PER_UART1_CLKCTRL,
+ CM_L4PER_UART2_CLKCTRL,
+ CM_L4PER_UART4_CLKCTRL,
+ CM_WKUP_KEYBOARD_CLKCTRL,
+ CM_WKUP_WDTIMER2_CLKCTRL,
+ CM_CAM_ISS_CLKCTRL,
+ CM_CAM_FDIF_CLKCTRL,
+ CM_DSS_DSS_CLKCTRL,
+ CM_SGX_SGX_CLKCTRL,
+ CM_L3INIT_HSUSBHOST_CLKCTRL,
+ CM_L3INIT_FSUSB_CLKCTRL,
+ 0
+};
+
+static u32 get_m_n(u32 target_freq_khz, u32 ref_freq_khz, u32 *m, u32 *n,
+ u32 tolerance_khz)
+{
+ u32 min_freq = target_freq_khz - tolerance_khz;
+ u32 max_freq = target_freq_khz;
+ u32 freq, freq_old;
+ *n = 1;
+ while (1) {
+ *m = min_freq / ref_freq_khz / 2 * (*n);
+ freq_old = 0;
+ while (1) {
+ freq = ref_freq_khz * 2 * (*m) / (*n);
+ if (abs(target_freq_khz - freq_old) <=
+ abs(target_freq_khz - freq)) {
+ freq = freq_old;
+ (*m)--;
+ break;
+ }
+ (*m)++;
+ freq_old = freq;
+ }
+ if (freq >= min_freq && freq <= max_freq)
+ break;
+ (*n)++;
+ if ((*n) > OMAP_DPLL_MAX_N + 1)
+ return 1;
+ }
+ (*n)--;
+ return 0;
+}
+
+static u32 __get_syc_clk_freq(void)
+{
+ /*
+ * For ES1 the ROM code calibration of sys clock is not reliable
+ * due to hw issue. So, use hard-coded value. If this value is not
+ * correct for any board over-ride this function in board file
+ * From ES2.0 onwards you will get this information from
+ * CM_SYS_CLKSEL
+ */
+ if (omap4_revision() == OMAP4430_ES1_0)
+ return OMAP_SYS_CLK_FREQ_38_4_MHZ;
+ else {
+ u32 sys_clk_ind = readl(CM_SYS_CLKSEL) &
+ CM_SYS_CLKSEL_SYS_CLKSEL_MASK;
+ return sys_clk_array[sys_clk_ind];
+ }
+}
+
+static inline void do_bypass_dpll(u32 base)
+{
+ struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
+
+ modify_reg_32(&dpll_regs->cm_clkmode_dpll,
+ CM_CLKMODE_DPLL_DPLL_EN_SHIFT,
+ CM_CLKMODE_DPLL_DPLL_EN_MASK, DPLL_EN_FAST_RELOCK_BYPASS);
+}
+
+static inline void wait_for_bypass(u32 base)
+{
+ struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
+
+ while (readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK)
+ ;
+}
+
+static inline void do_lock_dpll(u32 base)
+{
+ struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
+
+ modify_reg_32(&dpll_regs->cm_clkmode_dpll,
+ CM_CLKMODE_DPLL_DPLL_EN_SHIFT,
+ CM_CLKMODE_DPLL_DPLL_EN_MASK, DPLL_EN_LOCK);
+}
+
+static inline void wait_for_lock(u32 base)
+{
+ struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
+
+ while (!(readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK))
+ ;
+}
+
+static void do_setup_dpll(u32 base, const struct dpll_params *params,
+ u32 ref_clk_khz, u32 tolerance, u8 lock)
+{
+ u32 temp, m, n;
+ struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
+
+ do_bypass_dpll(base);
+
+ /* Get the M & N values */
+ m = params->m;
+ n = params->n;
+ /* if m & n are not specified calculate them */
+ if (!(m && n)) {
+ if (get_m_n(params->locked_freq_khz, ref_clk_khz,
+ &m, &n, tolerance)) {
+ /* DPLL locking is critical if it fails just hang */
+ for (;;)
+ ;
+ return;
+ }
+ }
+
+ /* Wait till the DPLL is in BYPASS */
+ wait_for_bypass(base);
+
+ /* Set M & N */
+ temp = readl(&dpll_regs->cm_clksel_dpll);
+ set_bit_field(temp, CM_CLKSEL_DPLL_M_SHIFT, CM_CLKSEL_DPLL_M_MASK, m);
+ set_bit_field(temp, CM_CLKSEL_DPLL_N_SHIFT, CM_CLKSEL_DPLL_N_MASK, n);
+ writel(temp, &dpll_regs->cm_clksel_dpll);
+
+ /* Lock */
+ if (lock)
+ do_lock_dpll(base);
+
+ /* Setup post-dividers */
+ if (params->m2 >= 0)
+ writel(params->m2, &dpll_regs->cm_div_m2_dpll);
+ if (params->m3 >= 0)
+ writel(params->m3, &dpll_regs->cm_div_m3_dpll);
+ if (params->m4 >= 0)
+ writel(params->m4, &dpll_regs->cm_div_m4_dpll);
+ if (params->m5 >= 0)
+ writel(params->m5, &dpll_regs->cm_div_m5_dpll);
+ if (params->m6 >= 0)
+ writel(params->m6, &dpll_regs->cm_div_m6_dpll);
+ if (params->m7 >= 0)
+ writel(params->m7, &dpll_regs->cm_div_m7_dpll);
+
+ /* Wait till the DPLL locks */
+ if (lock)
+ wait_for_lock(base);
+}
+
+const struct dpll_params *get_core_dpll_params(void)
+{
+ switch (omap4_revision()) {
+ case OMAP4430_ES1_0:
+ return &core_dpll_params_es1_l3_190;
+ case OMAP4430_ES2_0:
+ case OMAP4430_SILICON_ID_INVALID:
+ return &core_dpll_params_opp100_ddr200; /* safest */
+ case OMAP4430_ES2_1:
+ case OMAP4430_ES2_2:
+ return &core_dpll_params_opp100;
+ default:
+ return NULL;
+ }
+}
+
+u32 omap4_ddr_clk(void)
+{
+ u32 ddr_clk;
+ const struct dpll_params *core_dpll_params;
+
+ core_dpll_params = get_core_dpll_params();
+ /*
+ * DDR frequency is PHY_ROOT_CLK/2
+ * PHY_ROOT_CLK = Fdpll/2/M2
+ */
+ ddr_clk = core_dpll_params->locked_freq_khz / 4 / core_dpll_params->m2;
+ ddr_clk *= 1000; /* convert to Hz */
+ return ddr_clk;
+}
+
+static void setup_dplls(void)
+{
+ u32 sys_clk_khz, temp;
+ const struct dpll_params *params;
+
+ sys_clk_khz = get_syc_clk_freq() / 1000;
+
+ /* CORE dpll */
+ params = get_core_dpll_params(); /* default - safest */
+ /*
+ * Do not lock the core DPLL now. Just set it up.
+ * Core DPLL will be locked after setting up EMIF
+ * using the FREQ_UPDATE method(freq_update_core())
+ */
+ do_setup_dpll(CM_CLKMODE_DPLL_CORE, params, sys_clk_khz,
+ DPLL_LOCKED_FREQ_TOLERANCE_0, CONFIGURE_NO_LOCK);
+ /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */
+ temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) |
+ (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) |
+ (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT);
+ writel(temp, CM_CLKSEL_CORE);
+
+ /* lock PER dpll */
+ do_setup_dpll(CM_CLKMODE_DPLL_PER, &per_dpll_params_opp100, sys_clk_khz,
+ DPLL_LOCKED_FREQ_TOLERANCE_0, CONFIGURE_AND_LOCK);
+
+ /* MPU dpll */
+ if (omap4_revision() == OMAP4430_ES1_0)
+ params = &mpu_dpll_params_600mhz;
+ else
+ params = &mpu_dpll_params_1000mhz;
+ do_setup_dpll(CM_CLKMODE_DPLL_MPU, params, sys_clk_khz,
+ DPLL_LOCKED_FREQ_TOLERANCE_0, CONFIGURE_AND_LOCK);
+}
+
+static void setup_non_essential_dplls(void)
+{
+ u32 sys_clk_khz, temp, abe_ref_clk;
+ u32 m, n, sd_div, num, den;
+ struct dpll_params tmp_params;
+
+ sys_clk_khz = get_syc_clk_freq() / 1000;
+
+ /* IVA */
+ do_setup_dpll(CM_CLKMODE_DPLL_IVA, &iva_dpll_params, sys_clk_khz,
+ DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ, CONFIGURE_AND_LOCK);
+
+ /* USB */
+ tmp_params = usb_dpll_params;
+ get_m_n(tmp_params.locked_freq_khz, sys_clk_khz, &m, &n,
+ DPLL_LOCKED_FREQ_TOLERANCE_0);
+ /*
+ * USB dpll is J-type. Need to set DPLL_SD_DIV for jitter correction
+ * DPLL_SD_DIV = CEILING ([DPLL_MULT/(DPLL_DIV+1)]* CLKINP / 250)
+ * - where CLKINP is sys_clk in MHz
+ * Use CLKINP in KHz and adjust the denominator accordingly so
+ * that we have enough accuracy and at the same time no overflow
+ */
+ num = m * sys_clk_khz;
+ den = (n + 1) * 250 * 1000;
+ num += den - 1;
+ sd_div = num / den;
+ temp = readl(CM_CLKSEL_DPLL_USB);
+ set_bit_field(temp, CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT,
+ CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK, sd_div);
+ writel(temp, CM_CLKSEL_DPLL_USB);
+ /* Now setup the dpll with the regular function */
+ tmp_params.m = m;
+ tmp_params.n = n;
+ do_setup_dpll(CM_CLKMODE_DPLL_USB, &tmp_params, sys_clk_khz,
+ DPLL_LOCKED_FREQ_TOLERANCE_0, CONFIGURE_AND_LOCK);
+
+ /* ABE dpll */
+ tmp_params = abe_dpll_params;
+#ifdef CONFIG_SYS_OMAP4_ABE_SYSCK
+ abe_ref_clk = sys_clk_khz;
+#else
+ /* Enable REGM4XEN to achieve 196.608MHz from 32768 Hz */
+ writel(readl(CM_CLKMODE_DPLL_ABE) | CM_CLKMODE_DPLL_DPLL_REGM4XEN_MASK,
+ CM_CLKMODE_DPLL_ABE);
+
+ /*
+ * Converting the input clock 32768 Hz to KHz would result in accuracy
+ * loss. Instead make both target frequency and reference clock to be
+ * in terms of Hz.
+ *
+ * Also, REGM4XEN is enabled so there is an additional
+ * multiplier of 4 for M. So adjust for this while passing target
+ * frequency to get_m_n()
+ */
+ tmp_params.locked_freq_khz = tmp_params.locked_freq_khz * 1000 / 4;
+ abe_ref_clk = OMAP_32K_CLK_FREQ;
+#endif
+ temp = (abe_ref_clk == OMAP_32K_CLK_FREQ) ?
+ CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK :
+ CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
+ /* Select the right reference clk */
+ modify_reg_32(CM_ABE_PLL_REF_CLKSEL,
+ CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT,
+ CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK,
+ temp);
+ /* Lock the dpll */
+ do_setup_dpll(CM_CLKMODE_DPLL_ABE, &tmp_params, abe_ref_clk,
+ DPLL_LOCKED_FREQ_TOLERANCE_0, CONFIGURE_AND_LOCK);
+}
+
+static void do_scale_vcore(u32 vcore_reg, u32 volt)
+{
+ u32 temp;
+
+ temp = SMPS_I2C_SLAVE_ADDR |
+ (vcore_reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
+ (volt << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
+ PRM_VC_VAL_BYPASS_VALID_BIT;
+ writel(temp, PRM_VC_VAL_BYPASS);
+ while (readl(PRM_VC_VAL_BYPASS) & PRM_VC_VAL_BYPASS_VALID_BIT)
+ ;
+}
+
+static void scale_vcores(void)
+{
+ u32 volt, sys_clk_khz, cycles_hi, cycles_low, temp;
+ u32 omap4_rev = omap4_revision();
+
+ sys_clk_khz = get_syc_clk_freq() / 1000;
+
+ /*
+ * Setup the dedicated I2C controller for Voltage Control
+ * I2C clk - high period 40% low period 60%
+ */
+ cycles_hi = sys_clk_khz * 4 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
+ cycles_low = sys_clk_khz * 6 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
+ /* values to be set in register - less by 5 & 7 respectively */
+ cycles_hi -= 5;
+ cycles_low -= 7;
+ temp = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
+ (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
+ writel(temp, PRM_VC_CFG_I2C_CLK);
+
+ /* Disable high speed mode and all advanced features */
+ writel(0x0, PRM_VC_CFG_I2C_MODE);
+
+ /* VCORE 1 */
+ if ((omap4_rev == OMAP4430_ES2_0) || (omap4_rev == OMAP4430_ES2_1))
+ volt = SMPS_VOLT_1_3500_V;
+ else
+ volt = SMPS_VOLT_1_5000_V;
+ do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
+
+ /* VCORE 2 */
+ if ((omap4_rev == OMAP4430_ES2_0) || (omap4_rev == OMAP4430_ES2_1))
+ volt = SMPS_VOLT_1_1000_V;
+ else
+ volt = SMPS_VOLT_1_2000_V;
+ do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
+
+ /* VCORE 3 */
+ if (omap4_rev == OMAP4430_ES2_0)
+ volt = SMPS_VOLT_1_1000_V;
+ else if (omap4_rev == OMAP4430_ES2_1)
+ volt = SMPS_VOLT_1_1125_V;
+ else
+ volt = SMPS_VOLT_1_2000_V;
+
+ do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt);
+}
+
+static void enable_clock_domain(u32 clkctrl_reg, u32 enable_mode)
+{
+ modify_reg_32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_SHIFT,
+ CD_CLKCTRL_CLKTRCTRL_MASK, enable_mode);
+}
+
+static inline void wait_for_clk_enable(u32 clkctrl_addr)
+{
+ u32 idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+
+ while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+ (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+ idlest = readl(clkctrl_addr);
+ idlest = get_bit_field(idlest, MODULE_CLKCTRL_IDLEST_SHIFT,
+ MODULE_CLKCTRL_IDLEST_MASK);
+ }
+}
+
+static void enable_clock_module(u32 clkctrl_addr, u32 enable_mode,
+ u32 wait_for_enable)
+{
+ modify_reg_32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_SHIFT,
+ MODULE_CLKCTRL_MODULEMODE_MASK, enable_mode);
+ if (wait_for_enable)
+ wait_for_clk_enable(clkctrl_addr);
+}
+
+/*
+ * Enable a set of clock domains and clock modules associated with them
+ */
+static void enable_clocks(const u32 *clock_domains,
+ const u32 *clock_modules_hw_auto,
+ const u32 *clock_modules_explicit_en,
+ u32 wait_for_enable)
+{
+ int i = 0, max = 100;
+ /* Put the clock domains in SW_WKUP mode */
+ for (i = 0; (i < max) && clock_domains[i]; i++) {
+ enable_clock_domain(clock_domains[i],
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+ }
+
+ /* Clock modules that need to be put in HW_AUTO */
+ for (i = 0; (i < max) && clock_modules_hw_auto[i]; i++) {
+ enable_clock_module(clock_modules_hw_auto[i],
+ MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
+ wait_for_enable);
+ };
+
+ /* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+ for (i = 0; (i < max) && clock_modules_explicit_en[i]; i++) {
+ enable_clock_module(clock_modules_explicit_en[i],
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+ wait_for_enable);
+ };
+
+ /* Put the clock domains in HW_AUTO mode now */
+ for (i = 0; (i < max) && clock_domains[i]; i++) {
+ enable_clock_domain(clock_domains[i],
+ CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+ }
+}
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+static void enable_basic_clocks(void)
+{
+ /* Enable optional additional functional clock for GPIO4 */
+ writel(readl(CM_L4PER_GPIO4_CLKCTRL) | GPIO4_CLKCTRL_OPTFCLKEN_SHIFT,
+ CM_L4PER_GPIO4_CLKCTRL);
+
+ /* Enable 96 MHz clock for MMC1 & MMC2 */
+ writel(readl(CM_L3INIT_HSMMC1_CLKCTRL) | HSMMC_CLKCTRL_CLKSEL_SHIFT,
+ CM_L3INIT_HSMMC1_CLKCTRL);
+ writel(readl(CM_L3INIT_HSMMC2_CLKCTRL) | HSMMC_CLKCTRL_CLKSEL_SHIFT,
+ CM_L3INIT_HSMMC2_CLKCTRL);
+
+ /* Select 32KHz clock as the source of GPTIMER1 */
+ writel(readl(CM_WKUP_GPTIMER1_CLKCTRL) | GPTIMER1_CLKCTRL_CLKSEL_SHIFT,
+ CM_WKUP_GPTIMER1_CLKCTRL);
+
+ /* Enable optional 48M functional clock for USB PHY */
+ writel(readl(CM_L3INIT_USBPHY_CLKCTRL) |
+ USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK, CM_L3INIT_USBPHY_CLKCTRL);
+
+ /* Enable all essential clock domains and modules */
+ enable_clocks(clk_domains_essential,
+ clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential, 1);
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+static void enable_non_essential_clocks(void)
+{
+ u32 tmp;
+ /* Enable optional functional clock for ISS */
+ writel(readl(CM_CAM_ISS_CLKCTRL) | ISS_CLKCTRL_OPTFCLKEN_SHIFT,
+ CM_CAM_ISS_CLKCTRL);
+
+ /* Enable all optional functional clocks of DSS */
+ writel(readl(CM_DSS_DSS_CLKCTRL) | DSS_CLKCTRL_OPTFCLKEN_MASK,
+ CM_DSS_DSS_CLKCTRL);
+
+ /* Enable all non-essential clock domains and modules */
+ enable_clocks(clk_domains_non_essential,
+ clk_modules_hw_auto_non_essential,
+ clk_modules_explicit_en_non_essential, 0);
+
+ /* Put camera module in no sleep mode */
+ tmp = readl(CM_CAM_CLKSTCTRL);
+ set_bit_field(tmp, MODULE_CLKCTRL_MODULEMODE_SHIFT,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ CD_CLKCTRL_CLKTRCTRL_NO_SLEEP);
+ writel(tmp, CM_CAM_CLKSTCTRL);
+}
+
+void freq_update_core(void)
+{
+ u32 freq_config1 = 0;
+ const struct dpll_params *core_dpll_params;
+
+ core_dpll_params = get_core_dpll_params();
+ /* Put EMIF clock domain in sw wakeup mode */
+ enable_clock_domain(CM_MEMIF_CLKSTCTRL, CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+ wait_for_clk_enable(CM_MEMIF_EMIF_1_CLKCTRL);
+ wait_for_clk_enable(CM_MEMIF_EMIF_2_CLKCTRL);
+
+ freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK |
+ SHADOW_FREQ_CONFIG1_DLL_RESET_MASK;
+
+ set_bit_field(freq_config1, SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT,
+ SHADOW_FREQ_CONFIG1_DPLL_EN_MASK, DPLL_EN_LOCK);
+
+ set_bit_field(freq_config1, SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT,
+ SHADOW_FREQ_CONFIG1_M2_DIV_MASK, core_dpll_params->m2);
+
+ writel(freq_config1, CM_SHADOW_FREQ_CONFIG1);
+ while (readl(CM_SHADOW_FREQ_CONFIG1) &
+ SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK)
+ ;
+
+ /* Put EMIF clock domain back in hw auto mode */
+ enable_clock_domain(CM_MEMIF_CLKSTCTRL, CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+ wait_for_clk_enable(CM_MEMIF_EMIF_1_CLKCTRL);
+ wait_for_clk_enable(CM_MEMIF_EMIF_2_CLKCTRL);
+}
+
+void bypass_dpll(u32 base)
+{
+ do_bypass_dpll(base);
+ wait_for_bypass(base);
+}
+
+void lock_dpll(u32 base)
+{
+ do_lock_dpll(base);
+ wait_for_lock(base);
+}
+
+u32 get_syc_clk_freq(void)
+ __attribute__ ((weak, alias("__get_syc_clk_freq")));
+
+void prcm_init(void)
+{
+ switch (omap4_hw_init_context()) {
+ case OMAP_INIT_CONTEXT_SPL:
+ scale_vcores();
+ setup_dplls();
+ enable_basic_clocks();
+ break;
+ case OMAP_INIT_CONTEXT_UBOOT_LOADED_BY_SPL:
+ setup_non_essential_dplls();
+ enable_non_essential_clocks();
+ break;
+ case OMAP_INIT_CONTEXT_XIP_UBOOT:
+ case OMAP_INIT_CONTEXT_UBOOT_LOADED_BY_CH:
+ scale_vcores();
+ setup_dplls();
+ enable_basic_clocks();
+ setup_non_essential_dplls();
+ enable_non_essential_clocks();
+ break;
+ }
+}
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
new file mode 100644
index 0000000..fdbe632
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -0,0 +1,504 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh at ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CLOCKS_OMAP4_H_
+#define _CLOCKS_OMAP4_H_
+#include <common.h>
+
+#define CM_CLKMODE_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4120)
+#define CM_CLKMODE_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8140)
+#define CM_CLKMODE_DPLL_MPU (OMAP44XX_L4_CORE_BASE + 0x4160)
+#define CM_CLKSEL_CORE (OMAP44XX_L4_CORE_BASE + 0x4100)
+
+/* PRM.CKGEN module registers */
+#define CM_ABE_PLL_REF_CLKSEL (OMAP44XX_L4_WKUP_BASE + 0x610C)
+#define CM_SYS_CLKSEL (OMAP44XX_L4_WKUP_BASE + 0x6110)
+
+/* PRM.WKUP_CM module registers */
+#define CM_WKUP_CLKSTCTRL (OMAP44XX_L4_WKUP_BASE + 0x7800)
+#define CM_WKUP_L4WKUP_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7820)
+#define CM_WKUP_WDTIMER1_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7828)
+#define CM_WKUP_WDTIMER2_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7830)
+#define CM_WKUP_GPIO1_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7838)
+#define CM_WKUP_GPTIMER1_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7840)
+#define CM_WKUP_GPTIMER12_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7848)
+#define CM_WKUP_SYNCTIMER_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7850)
+#define CM_WKUP_USIM_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7858)
+#define CM_WKUP_SARRAM_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7860)
+#define CM_WKUP_KEYBOARD_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7878)
+#define CM_WKUP_RTC_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7880)
+#define CM_WKUP_BANDGAP_CLKCTRL (OMAP44XX_L4_WKUP_BASE + 0x7888)
+
+/* DEVICE_PRM Registers */
+#define PRM_VC_VAL_BYPASS (OMAP44XX_L4_WKUP_BASE + 0x7BA0)
+#define PRM_VC_CFG_CHANNEL (OMAP44XX_L4_WKUP_BASE + 0x7BA4)
+#define PRM_VC_CFG_I2C_MODE (OMAP44XX_L4_WKUP_BASE + 0x7BA8)
+#define PRM_VC_CFG_I2C_CLK (OMAP44XX_L4_WKUP_BASE + 0x7BAC)
+
+/* CM1.CKGEN module registers */
+#define CM_CLKSEL_CORE (OMAP44XX_L4_CORE_BASE + 0x4100)
+#define CM_CLKSEL_ABE (OMAP44XX_L4_CORE_BASE + 0x4108)
+#define CM_DLL_CTRL (OMAP44XX_L4_CORE_BASE + 0x4110)
+#define CM_CLKMODE_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4120)
+#define CM_IDLEST_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4124)
+#define CM_AUTOIDLE_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4128)
+#define CM_CLKSEL_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x412c)
+#define CM_DIV_M2_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4130)
+#define CM_DIV_M3_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4134)
+#define CM_DIV_M4_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4138)
+#define CM_DIV_M5_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x413c)
+#define CM_DIV_M6_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4140)
+#define CM_DIV_M7_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4144)
+#define CM_SSC_DELTAMSTEP_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4148)
+#define CM_SSC_MODFREQDIV_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x414c)
+#define CM_EMU_OVERRIDE_DPLL_CORE (OMAP44XX_L4_CORE_BASE + 0x4150)
+#define CM_CLKMODE_DPLL_MPU (OMAP44XX_L4_CORE_BASE + 0x4160)
+#define CM_IDLEST_DPLL_MPU (OMAP44XX_L4_CORE_BASE + 0x4164)
+#define CM_AUTOIDLE_DPLL_MPU (OMAP44XX_L4_CORE_BASE + 0x4168)
+#define CM_CLKSEL_DPLL_MPU (OMAP44XX_L4_CORE_BASE + 0x416c)
+#define CM_DIV_M2_DPLL_MPU (OMAP44XX_L4_CORE_BASE + 0x4170)
+#define CM_SSC_DELTAMSTEP_DPLL_MPU (OMAP44XX_L4_CORE_BASE + 0x4188)
+#define CM_SSC_MODFREQDIV_DPLL_MPU (OMAP44XX_L4_CORE_BASE + 0x418c)
+#define CM_BYPCLK_DPLL_MPU (OMAP44XX_L4_CORE_BASE + 0x419c)
+#define CM_CLKMODE_DPLL_IVA (OMAP44XX_L4_CORE_BASE + 0x41a0)
+#define CM_IDLEST_DPLL_IVA (OMAP44XX_L4_CORE_BASE + 0x41a4)
+#define CM_AUTOIDLE_DPLL_IVA (OMAP44XX_L4_CORE_BASE + 0x41a8)
+#define CM_CLKSEL_DPLL_IVA (OMAP44XX_L4_CORE_BASE + 0x41ac)
+#define CM_DIV_M4_DPLL_IVA (OMAP44XX_L4_CORE_BASE + 0x41b8)
+#define CM_DIV_M5_DPLL_IVA (OMAP44XX_L4_CORE_BASE + 0x41bc)
+#define CM_SSC_DELTAMSTEP_DPLL_IVA (OMAP44XX_L4_CORE_BASE + 0x41c8)
+#define CM_SSC_MODFREQDIV_DPLL_IVA (OMAP44XX_L4_CORE_BASE + 0x41cc)
+#define CM_BYPCLK_DPLL_IVA (OMAP44XX_L4_CORE_BASE + 0x41dc)
+#define CM_CLKMODE_DPLL_ABE (OMAP44XX_L4_CORE_BASE + 0x41e0)
+#define CM_IDLEST_DPLL_ABE (OMAP44XX_L4_CORE_BASE + 0x41e4)
+#define CM_AUTOIDLE_DPLL_ABE (OMAP44XX_L4_CORE_BASE + 0x41e8)
+#define CM_CLKSEL_DPLL_ABE (OMAP44XX_L4_CORE_BASE + 0x41ec)
+#define CM_DIV_M2_DPLL_ABE (OMAP44XX_L4_CORE_BASE + 0x41f0)
+#define CM_DIV_M3_DPLL_ABE (OMAP44XX_L4_CORE_BASE + 0x41f4)
+#define CM_SSC_DELTAMSTEP_DPLL_ABE (OMAP44XX_L4_CORE_BASE + 0x4208)
+#define CM_SSC_MODFREQDIV_DPLL_ABE (OMAP44XX_L4_CORE_BASE + 0x420c)
+#define CM_CLKMODE_DPLL_DDRPHY (OMAP44XX_L4_CORE_BASE + 0x4220)
+#define CM_IDLEST_DPLL_DDRPHY (OMAP44XX_L4_CORE_BASE + 0x4224)
+#define CM_AUTOIDLE_DPLL_DDRPHY (OMAP44XX_L4_CORE_BASE + 0x4228)
+#define CM_CLKSEL_DPLL_DDRPHY (OMAP44XX_L4_CORE_BASE + 0x422c)
+#define CM_DIV_M2_DPLL_DDRPHY (OMAP44XX_L4_CORE_BASE + 0x4230)
+#define CM_DIV_M4_DPLL_DDRPHY (OMAP44XX_L4_CORE_BASE + 0x4238)
+#define CM_DIV_M5_DPLL_DDRPHY (OMAP44XX_L4_CORE_BASE + 0x423c)
+#define CM_DIV_M6_DPLL_DDRPHY (OMAP44XX_L4_CORE_BASE + 0x4240)
+#define CM_SSC_DELTAMSTEP_DPLL_DDRPHY (OMAP44XX_L4_CORE_BASE + 0x4248)
+#define CM_SHADOW_FREQ_CONFIG1 (OMAP44XX_L4_CORE_BASE + 0x4260)
+
+/* CM1.ABE register offsets */
+#define CM1_ABE_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x4500)
+#define CM1_ABE_L4ABE_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4520)
+#define CM1_ABE_AESS_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4528)
+#define CM1_ABE_PDM_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4530)
+#define CM1_ABE_DMIC_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4538)
+#define CM1_ABE_MCASP_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4540)
+#define CM1_ABE_MCBSP1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4548)
+#define CM1_ABE_MCBSP2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4550)
+#define CM1_ABE_MCBSP3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4558)
+#define CM1_ABE_SLIMBUS_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4560)
+#define CM1_ABE_TIMER5_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4568)
+#define CM1_ABE_TIMER6_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4570)
+#define CM1_ABE_TIMER7_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4578)
+#define CM1_ABE_TIMER8_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4580)
+#define CM1_ABE_WDT3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4588)
+
+/* CM1.DSP register offsets */
+#define CM_DSP_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x4400)
+#define CM_DSP_DSP_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x4420)
+
+/* CM2.CKGEN module registers */
+#define CM_CLKSEL_MPU_M3_ISS_ROOT (OMAP44XX_L4_CORE_BASE + 0x8100)
+#define CM_CLKSEL_USB_60MHz (OMAP44XX_L4_CORE_BASE + 0x8104)
+#define CM_SCALE_FCLK (OMAP44XX_L4_CORE_BASE + 0x8108)
+#define CM_CORE_DVFS_PERF1 (OMAP44XX_L4_CORE_BASE + 0x8110)
+#define CM_CORE_DVFS_PERF2 (OMAP44XX_L4_CORE_BASE + 0x8114)
+#define CM_CORE_DVFS_PERF3 (OMAP44XX_L4_CORE_BASE + 0x8118)
+#define CM_CORE_DVFS_PERF4 (OMAP44XX_L4_CORE_BASE + 0x811c)
+#define CM_CORE_DVFS_CURRENT (OMAP44XX_L4_CORE_BASE + 0x8124)
+#define CM_IVA_DVFS_PERF_TESLA (OMAP44XX_L4_CORE_BASE + 0x8128)
+#define CM_IVA_DVFS_PERF_IVAHD (OMAP44XX_L4_CORE_BASE + 0x812c)
+#define CM_IVA_DVFS_PERF_ABE (OMAP44XX_L4_CORE_BASE + 0x8130)
+#define CM_IVA_DVFS_CURRENT (OMAP44XX_L4_CORE_BASE + 0x8138)
+#define CM_CLKMODE_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8140)
+#define CM_IDLEST_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8144)
+#define CM_AUTOIDLE_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8148)
+#define CM_CLKSEL_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x814c)
+#define CM_DIV_M2_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8150)
+#define CM_DIV_M3_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8154)
+#define CM_DIV_M4_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8158)
+#define CM_DIV_M5_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x815c)
+#define CM_DIV_M6_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8160)
+#define CM_DIV_M7_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8164)
+#define CM_SSC_DELTAMSTEP_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8168)
+#define CM_SSC_MODFREQDIV_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x816c)
+#define CM_EMU_OVERRIDE_DPLL_PER (OMAP44XX_L4_CORE_BASE + 0x8170)
+#define CM_CLKMODE_DPLL_USB (OMAP44XX_L4_CORE_BASE + 0x8180)
+#define CM_IDLEST_DPLL_USB (OMAP44XX_L4_CORE_BASE + 0x8184)
+#define CM_AUTOIDLE_DPLL_USB (OMAP44XX_L4_CORE_BASE + 0x8188)
+#define CM_CLKSEL_DPLL_USB (OMAP44XX_L4_CORE_BASE + 0x818c)
+#define CM_DIV_M2_DPLL_USB (OMAP44XX_L4_CORE_BASE + 0x8190)
+#define CM_SSC_DELTAMSTEP_DPLL_USB (OMAP44XX_L4_CORE_BASE + 0x81a8)
+#define CM_SSC_MODFREQDIV_DPLL_USB (OMAP44XX_L4_CORE_BASE + 0x81ac)
+#define CM_CLKDCOLDO_DPLL_USB (OMAP44XX_L4_CORE_BASE + 0x81b4)
+#define CM_CLKMODE_DPLL_UNIPRO (OMAP44XX_L4_CORE_BASE + 0x81c0)
+#define CM_IDLEST_DPLL_UNIPRO (OMAP44XX_L4_CORE_BASE + 0x81c4)
+#define CM_AUTOIDLE_DPLL_UNIPRO (OMAP44XX_L4_CORE_BASE + 0x81c8)
+#define CM_CLKSEL_DPLL_UNIPRO (OMAP44XX_L4_CORE_BASE + 0x81cc)
+#define CM_DIV_M2_DPLL_UNIPRO (OMAP44XX_L4_CORE_BASE + 0x81d0)
+#define CM_SSC_DELTAMSTEP_DPLL_UNIPRO (OMAP44XX_L4_CORE_BASE + 0x81e8)
+#define CM_SSC_MODFREQDIV_DPLL_UNIPRO (OMAP44XX_L4_CORE_BASE + 0x81ec)
+
+/* CM2.CORE module registers */
+#define CM_L3_1_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x8700)
+#define CM_L3_1_DYNAMICDEP (OMAP44XX_L4_CORE_BASE + 0x8708)
+#define CM_L3_1_L3_1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8720)
+#define CM_L3_2_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x8800)
+#define CM_L3_2_DYNAMICDEP (OMAP44XX_L4_CORE_BASE + 0x8808)
+#define CM_L3_2_L3_2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8820)
+#define CM_L3_2_GPMC_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8828)
+#define CM_L3_2_OCMC_RAM_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8830)
+#define CM_MPU_M3_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x8900)
+#define CM_MPU_M3_STATICDEP (OMAP44XX_L4_CORE_BASE + 0x8904)
+#define CM_MPU_M3_DYNAMICDEP (OMAP44XX_L4_CORE_BASE + 0x8908)
+#define CM_MPU_M3_MPU_M3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8920)
+#define CM_SDMA_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x8a00)
+#define CM_SDMA_STATICDEP (OMAP44XX_L4_CORE_BASE + 0x8a04)
+#define CM_SDMA_DYNAMICDEP (OMAP44XX_L4_CORE_BASE + 0x8a08)
+#define CM_SDMA_SDMA_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8a20)
+#define CM_MEMIF_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x8b00)
+#define CM_MEMIF_DMM_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8b20)
+#define CM_MEMIF_EMIF_FW_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8b28)
+#define CM_MEMIF_EMIF_1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8b30)
+#define CM_MEMIF_EMIF_2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8b38)
+#define CM_MEMIF_DLL_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8b40)
+#define CM_MEMIF_EMIF_H1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8b50)
+#define CM_MEMIF_EMIF_H2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8b58)
+#define CM_MEMIF_DLL_H_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8b60)
+#define CM_C2C_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x8c00)
+#define CM_C2C_STATICDEP (OMAP44XX_L4_CORE_BASE + 0x8c04)
+#define CM_C2C_DYNAMICDEP (OMAP44XX_L4_CORE_BASE + 0x8c08)
+#define CM_C2C_SAD2D_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8c20)
+#define CM_C2C_MODEM_ICR_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8c28)
+#define CM_C2C_SAD2D_FW_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8c30)
+#define CM_L4CFG_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x8d00)
+#define CM_L4CFG_DYNAMICDEP (OMAP44XX_L4_CORE_BASE + 0x8d08)
+#define CM_L4CFG_L4_CFG_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8d20)
+#define CM_L4CFG_HW_SEM_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8d28)
+#define CM_L4CFG_MAILBOX_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8d30)
+#define CM_L4CFG_SAR_ROM_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8d38)
+#define CM_L3INSTR_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x8e00)
+#define CM_L3INSTR_L3_3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8e20)
+#define CM_L3INSTR_L3_INSTR_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8e28)
+#define CM_L3INSTR_INTRCONN_WP1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8e40)
+
+/* CM2.L3INIT register offsets */
+#define CM_L3INIT_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x9300)
+
+/* CM2.L4PER register offsets */
+#define CM_L4PER_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x9400)
+#define CM_L4PER_DYNAMICDEP (OMAP44XX_L4_CORE_BASE + 0x9408)
+#define CM_L4PER_ADC_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9420)
+#define CM_L4PER_GPTIMER10_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9428)
+#define CM_L4PER_GPTIMER11_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9430)
+#define CM_L4PER_GPTIMER2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9438)
+#define CM_L4PER_GPTIMER3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9440)
+#define CM_L4PER_GPTIMER4_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9448)
+#define CM_L4PER_GPTIMER9_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9450)
+#define CM_L4PER_ELM_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9458)
+#define CM_L4PER_GPIO2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9460)
+#define CM_L4PER_GPIO3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9468)
+#define CM_L4PER_GPIO4_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9470)
+#define CM_L4PER_GPIO5_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9478)
+#define CM_L4PER_GPIO6_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9480)
+#define CM_L4PER_HDQ1W_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9488)
+#define CM_L4PER_HECC1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9490)
+#define CM_L4PER_HECC2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9498)
+#define CM_L4PER_I2C1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94a0)
+#define CM_L4PER_I2C2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94a8)
+#define CM_L4PER_I2C3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94b0)
+#define CM_L4PER_I2C4_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94b8)
+#define CM_L4PER_L4PER_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94c0)
+#define CM_L4PER_MCASP2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94d0)
+#define CM_L4PER_MCASP3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94d8)
+#define CM_L4PER_MCBSP4_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94e0)
+#define CM_L4PER_MGATE_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94e8)
+#define CM_L4PER_MCSPI1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94f0)
+#define CM_L4PER_MCSPI2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x94f8)
+#define CM_L4PER_MCSPI3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9500)
+#define CM_L4PER_MCSPI4_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9508)
+#define CM_L4PER_MMCSD3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9520)
+#define CM_L4PER_MMCSD4_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9528)
+#define CM_L4PER_MSPROHG_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9530)
+#define CM_L4PER_SLIMBUS2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9538)
+#define CM_L4PER_UART1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9540)
+#define CM_L4PER_UART2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9548)
+#define CM_L4PER_UART3_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9550)
+#define CM_L4PER_UART4_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9558)
+#define CM_L4PER_MMCSD5_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9560)
+#define CM_L4PER_I2C5_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9568)
+#define CM_L4SEC_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x9580)
+#define CM_L4SEC_STATICDEP (OMAP44XX_L4_CORE_BASE + 0x9584)
+#define CM_L4SEC_DYNAMICDEP (OMAP44XX_L4_CORE_BASE + 0x9588)
+#define CM_L4SEC_AES1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x95a0)
+#define CM_L4SEC_AES2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x95a8)
+#define CM_L4SEC_DES3DES_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x95b0)
+#define CM_L4SEC_PKAEIP29_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x95b8)
+#define CM_L4SEC_RNG_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x95c0)
+#define CM_L4SEC_SHA2MD51_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x95c8)
+#define CM_L4SEC_CRYPTODMA_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x95d8)
+
+/* CM2.IVAHD */
+#define CM_IVAHD_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x8f00)
+#define CM_IVAHD_IVAHD_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8f20)
+#define CM_IVAHD_SL2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x8f28)
+
+/* CM2.L3INIT */
+#define CM_L3INIT_HSMMC1_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9328)
+#define CM_L3INIT_HSMMC2_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9330)
+#define CM_L3INIT_HSI_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9338)
+#define CM_L3INIT_HSUSBHOST_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9358)
+#define CM_L3INIT_HSUSBOTG_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9360)
+#define CM_L3INIT_HSUSBTLL_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9368)
+#define CM_L3INIT_P1500_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9378)
+#define CM_L3INIT_FSUSB_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x93d0)
+#define CM_L3INIT_USBPHY_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x93e0)
+
+/* CM2.CAM */
+#define CM_CAM_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x9000)
+#define CM_CAM_ISS_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9020)
+#define CM_CAM_FDIF_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9028)
+
+/* CM2.DSS */
+#define CM_DSS_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x9100)
+#define CM_DSS_DSS_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9120)
+
+/* CM2.SGX */
+#define CM_SGX_CLKSTCTRL (OMAP44XX_L4_CORE_BASE + 0x9200)
+#define CM_SGX_SGX_CLKCTRL (OMAP44XX_L4_CORE_BASE + 0x9220)
+
+/* DPLL register offsets */
+#define CM_CLKMODE_DPLL 0
+#define CM_IDLEST_DPLL 0x4
+#define CM_AUTOIDLE_DPLL 0x8
+#define CM_CLKSEL_DPLL 0xC
+#define CM_DIV_M2_DPLL 0x10
+#define CM_DIV_M3_DPLL 0x14
+#define CM_DIV_M4_DPLL 0x18
+#define CM_DIV_M5_DPLL 0x1C
+#define CM_DIV_M6_DPLL 0x20
+#define CM_DIV_M7_DPLL 0x24
+
+#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
+
+/* CM_CLKMODE_DPLL */
+#define CM_CLKMODE_DPLL_DPLL_REGM4XEN_MASK 11
+#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0
+#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0
+#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7
+
+#define DPLL_EN_STOP 1
+#define DPLL_EN_MN_BYPASS 4
+#define DPLL_EN_LOW_POWER_BYPASS 5
+#define DPLL_EN_FAST_RELOCK_BYPASS 6
+#define DPLL_EN_LOCK 7
+
+/* CM_IDLEST_DPLL fields */
+#define ST_DPLL_CLK_MASK 1
+
+/* CM_CLKSEL_DPLL */
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT 24
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK (0xFF << 24)
+#define CM_CLKSEL_DPLL_M_SHIFT 8
+#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8)
+#define CM_CLKSEL_DPLL_N_SHIFT 0
+#define CM_CLKSEL_DPLL_N_MASK 0x7F
+
+#define OMAP4_DPLL_MAX_N 127
+
+/* CM_SYS_CLKSEL */
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
+
+/* CM_CLKSEL_CORE */
+#define CLKSEL_CORE_SHIFT 0
+#define CLKSEL_L3_SHIFT 4
+#define CLKSEL_L4_SHIFT 8
+
+#define CLKSEL_CORE_X2_DIV_1 0
+#define CLKSEL_L3_CORE_DIV_2 1
+#define CLKSEL_L4_L3_DIV_2 1
+
+/* CM_ABE_PLL_REF_CLKSEL */
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT 0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK 1
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1
+
+
+/* CM_SHADOW_FREQ_CONFIG1 */
+#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK 1
+#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK 4
+#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK 8
+
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT 8
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK (7 << 8)
+
+#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT 11
+#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK (0x1F << 11)
+
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0
+#define CD_CLKCTRL_CLKTRCTRL_MASK 3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2
+#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO 3
+
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0
+#define MODULE_CLKCTRL_MODULEMODE_MASK 3
+#define MODULE_CLKCTRL_IDLEST_SHIFT 16
+#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0
+#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO 1
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1
+#define MODULE_CLKCTRL_IDLEST_IDLE 2
+#define MODULE_CLKCTRL_IDLEST_DISABLED 3
+
+/* CM_L4PER_GPIO4_CLKCTRL */
+#define GPIO4_CLKCTRL_OPTFCLKEN_SHIFT 8
+
+/* CM_L3INIT_HSMMCn_CLKCTRL */
+#define HSMMC_CLKCTRL_CLKSEL_SHIFT 24
+
+/* CM_WKUP_GPTIMER1_CLKCTRL */
+#define GPTIMER1_CLKCTRL_CLKSEL_SHIFT 24
+
+/* CM_CAM_ISS_CLKCTRL */
+#define ISS_CLKCTRL_OPTFCLKEN_SHIFT 8
+
+/* CM_DSS_DSS_CLKCTRL */
+#define DSS_CLKCTRL_OPTFCLKEN_MASK 0xF00
+
+/* CM_L3INIT_USBPHY_CLKCTRL */
+#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK 8
+
+/* Clock frequencies */
+#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
+#define OMAP_32K_CLK_FREQ 32768
+
+/* PRM_VC_CFG_I2C_CLK */
+#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0
+#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF
+#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8
+#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8)
+
+/* PRM_VC_VAL_BYPASS */
+#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
+
+#define PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F
+#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8
+#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF
+#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16
+#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
+
+#define SMPS_I2C_SLAVE_ADDR 0x12
+#define SMPS_REG_ADDR_VCORE1 0x55
+#define SMPS_REG_ADDR_VCORE2 0x5B
+#define SMPS_REG_ADDR_VCORE3 0x61
+
+#define SMPS_VOLT_1_0000_V 0x21
+#define SMPS_VOLT_1_0125_V 0x22
+#define SMPS_VOLT_1_0250_V 0x23
+#define SMPS_VOLT_1_0375_V 0x24
+#define SMPS_VOLT_1_0500_V 0x25
+#define SMPS_VOLT_1_0625_V 0x26
+#define SMPS_VOLT_1_0750_V 0x27
+#define SMPS_VOLT_1_0875_V 0x28
+#define SMPS_VOLT_1_1000_V 0x29
+#define SMPS_VOLT_1_1125_V 0x2A
+#define SMPS_VOLT_1_1250_V 0x2B
+#define SMPS_VOLT_1_1375_V 0x2C
+#define SMPS_VOLT_1_1500_V 0x2D
+#define SMPS_VOLT_1_1625_V 0x2E
+#define SMPS_VOLT_1_1750_V 0x2F
+#define SMPS_VOLT_1_1875_V 0x30
+#define SMPS_VOLT_1_2000_V 0x31
+#define SMPS_VOLT_1_2125_V 0x32
+#define SMPS_VOLT_1_2250_V 0x33
+#define SMPS_VOLT_1_2375_V 0x34
+#define SMPS_VOLT_1_2500_V 0x35
+#define SMPS_VOLT_1_2625_V 0x36
+#define SMPS_VOLT_1_2750_V 0x37
+#define SMPS_VOLT_1_2875_V 0x38
+#define SMPS_VOLT_1_3000_V 0x39
+#define SMPS_VOLT_1_3500_V 0x3A
+#define SMPS_VOLT_1_5000_V 0x3B
+#define SMPS_VOLT_1_5000_V 0x3B
+
+/* Defines for DPLL setup */
+#define DPLL_LOCKED_FREQ_TOLERANCE_0 0
+#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500
+#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000
+
+#define CONFIGURE_NO_LOCK 0
+#define CONFIGURE_AND_LOCK 1
+
+struct dpll_regs {
+ u32 cm_clkmode_dpll;
+ u32 cm_idlest_dpll;
+ u32 cm_autoidle_dpll;
+ u32 cm_clksel_dpll;
+ u32 cm_div_m2_dpll;
+ u32 cm_div_m3_dpll;
+ u32 cm_div_m4_dpll;
+ u32 cm_div_m5_dpll;
+ u32 cm_div_m6_dpll;
+ u32 cm_div_m7_dpll;
+};
+
+/* DPLL parameter table */
+struct dpll_params {
+ s32 m;
+ s32 n;
+ u32 locked_freq_khz;
+ s32 m2;
+ s32 m3;
+ s32 m4;
+ s32 m5;
+ s32 m6;
+ s32 m7;
+};
+
+#endif /* _CLOCKS_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 33a1666..fd21afd 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -39,6 +39,12 @@ void set_muxconf_regs_non_essential(void);
void sr32(void *, u32, u32, u32);
u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
+void prcm_init(void);
+void bypass_dpll(u32 base);
+void freq_update_core(void);
+u32 get_syc_clk_freq(void);
+u32 omap4_ddr_clk(void);
+u32 omap4_revision(void);
static inline u32 running_from_sdram(void)
{
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 50247af..49daa85 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -25,6 +25,9 @@
#ifndef _OMAP_COMMON_H_
#define _OMAP_COMMON_H_
+/* Max value for DPLL multiplier M */
+#define OMAP_DPLL_MAX_N 127
+
/* extract a bit field from a bit vector */
#define get_bit_field(nr, start, mask)\
(((nr) & (mask)) >> (start))
diff --git a/spl/board/ti/sdp4430/Makefile b/spl/board/ti/sdp4430/Makefile
index 6a6aa42..40e3e79 100644
--- a/spl/board/ti/sdp4430/Makefile
+++ b/spl/board/ti/sdp4430/Makefile
@@ -115,8 +115,12 @@ $(obj)board.c:$(obj)omap4_mux_data.h
@rm -f $@
@ln -s $(TOPDIR)/arch/arm/cpu/armv7/omap4/board.c $@
+$(obj)clocks.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/arch/arm/cpu/armv7/omap4/clocks.c $@
+
SOBJS += lowlevel_init.o
-COBJS += board.o
+COBJS += board.o clocks.o
# rules
LDPPFLAGS += -include $(TOPDIR)/include/config.h
--
1.7.0.4
More information about the U-Boot
mailing list