[U-Boot] [PATCH V3 6/6] MPC8xxx DDR: align informational prints

[Kumar Gala]

On Dec 17, 2010, at 5:17 PM, Becky Bruce wrote:

> Add spaces to cause the informational prints to line up with
> the ones from init_func_ram() in board.c.  Output now looks like
> this:
> 
> ....
> DRAM:  Detected 4096 MB of memory
>       This U-Boot only supports < 4G of DDR
>       You could rebuild it with CONFIG_PHYS_64BIT
>       DDR: 2 GiB (DDR2, 64-bit, CL=5, ECC off)
> ....
> 
> The prints from lbc_sdram_init() have also been modified to line
> line up and changed to start with "LBC SDRAM" instead of the
> confusing "SDRAM".
> 
> Signed-off-by: Becky Bruce <beckyb at kernel.crashing.org>
> ---
> arch/powerpc/cpu/mpc8xxx/ddr/main.c     |    5 +++--
> board/freescale/mpc8540ads/mpc8540ads.c |    5 +++--
> board/freescale/mpc8541cds/mpc8541cds.c |    6 +++---
> board/freescale/mpc8548cds/mpc8548cds.c |    6 +++---
> board/freescale/mpc8555cds/mpc8555cds.c |    6 +++---
> board/freescale/mpc8560ads/mpc8560ads.c |    5 +++--
> board/freescale/mpc8568mds/mpc8568mds.c |    6 +++---
> 7 files changed, 21 insertions(+), 18 deletions(-)

applied to 85xx

- k