[U-Boot] [U-BOOT] [PATCH 6/6] Pantheon: Add Board Support for Marvell dkb board

[Prafulla Wadaskar]

> -----Original Message-----
> From: Lei Wen [mailto:leiwen at marvell.com]
> Sent: Tuesday, January 04, 2011 8:21 PM
> To: u-boot at lists.denx.de; Prafulla Wadaskar; Yu Tang; Ashish Karkare;
> Prabhanjan Sarnaik; adrian.wenl at gmail.com
> Subject: [U-BOOT] [PATCH 6/6] Pantheon: Add Board Support for Marvell
> dkb board
> 
> DKB is a Development Board for PANTHEON TD/TTC(pxa920/pxa910) with
> * Processor upto 806Mhz
> * LPDDR1/2
> * x8/x16 SLC/MLC NAND
> * Footprints for eMMC & MMC x8 card
> 
> With Peripherals:
> * Parallel LCD I/F
> * Audio codecs (88PM8607)
> * MIPI CSI-2 camera
> * Marvell 88W8787 802.11n/BT module
> * Marvell 2G/3G RF
> * Dual analog mics & speakers, headset jack, LED, ambient
> * USB2.0 HS host, OTG (mini AB)
> * GPIO, GPIO expander with DIP switches for easier selection
> * UART serial over USB, CIR
> 
> This patch adds basic board support with DRAM and UART functionality
> 
> Signed-off-by: Lei Wen <leiwen at marvell.com>
> ---
>  MAINTAINERS                |    4 +++
>  board/Marvell/dkb/Makefile |   51 +++++++++++++++++++++++++++++++++++
>  board/Marvell/dkb/dkb.c    |   53 ++++++++++++++++++++++++++++++++++++
>  boards.cfg                 |    1 +
>  include/configs/dkb.h      |   64
> ++++++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 173 insertions(+), 0 deletions(-)
>  create mode 100644 board/Marvell/dkb/Makefile
>  create mode 100644 board/Marvell/dkb/dkb.c
>  create mode 100644 include/configs/dkb.h
> 

Acked-by: Prafulla Wadaskar <Prafulla at marvell.com>

Regards..
Prafulla . .