[U-Boot] [PATCH 0/2] ea20: build fixes

[Stefano Babic]

On 01/11/2011 08:48 PM, Ben Gardiner wrote:
> There are two separate issues causing failure of ea20 builds. 
> 
> I discovered them while trying to build a da850evm load with RMII support. The
> second patch affects all boards that could use CONFIG_DRIVER_TI_EMAC_USE_RMII
> of which ea20 is the only one set default in u-boot. The first patch fixes the 
> second problem I ran into trying to build ea20 after developping the RMII patch.
> 
> Ben Gardiner (2):
>   ea20: fix libea20.o not found
>   ea20: fix undefined PHY_* errors
> 
>  board/davinci/ea20/Makefile |    2 +-
>  drivers/net/davinci_emac.c  |    6 +++---
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 

Hi Ben,

thanks for discovering this issue and to fix it !

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================