[U-Boot] [PATCH 2/2] mpc5200, digsy_mtc: add support for rev5 board version

[Detlev Zundel]

Hi Wolfgang,

> Dear Heiko Schocher,
>
> In message <4D2D7122.60909 at denx.de> you wrote:
>> 
>> > Global question: do we really need an CONFIG_DIGSY_REV5?  Is there not
>> > a way to determine the revision by probing the hardware?  For example,
>> > the RTC's show up at different addresses on the bus - but ther emight
>> > be even easier ways?
>> 
>> Good question ... as I know, there is no possibility to detect the
>> hardware on an other way then over the RTC ... and I don;t want to
>> go this way ... what if the RTC is not responding?
>
> Maybe you can ask the hardware guys again?

We did this and we are sure that there is no better way.

Cheers
  Detlev

-- 
When you  loosen yourself from  all the obvious delusions  - religion,
ideology,  Communism - you're  still left  with the  myth of  your own
goodness. Which is the final delusion.
                                          -- Philip Roth
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de