[U-Boot] [PATCH 2/3] arm: Tegra2: Add support for NVIDIA Harmony board Signed-off-by: Tom Warren <twarren at nvidia.com>

Peter Tyser ptyser at xes-inc.com
Thu Jan 13 01:07:08 CET 2011


<snip>

> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -122,6 +122,7 @@ omap4_panda                  arm         armv7       panda               ti
>  omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
>  s5p_goni                     arm         armv7       goni                samsung        s5pc1xx
>  smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
> +harmony                      arm         armv7       harmony             tegra2         tegra2

I think 1st "tegra2" above should be changed to "nvidia".

>  actux1                       arm         ixp
>  actux2                       arm         ixp
>  actux3                       arm         ixp

<snip>

> diff --git a/include/configs/nv-common.h b/include/configs/nv-common.h

Perhaps a more descriptive name could be used?  NV == non-volatile to me
at first glance, and if this is tegra2-specific maybe tegra2-common.h
would be more appropriate?

> new file mode 100644
> index 0000000..46872d3
> --- /dev/null
> +++ b/include/configs/nv-common.h
> @@ -0,0 +1,166 @@
> +/*
> + *  (C) Copyright 2010,2011
> + *  NVIDIA Corporation <www.nvidia.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __TEGRA2_COMMON_H
> +#define __TEGRA2_COMMON_H

This define should match the name of the file.

> +#include <asm/sizes.h>
> +
> +/*
> + * High Level Configuration Options
> + */
> +#define CONFIG_ARMCORTEXA9		/* This is an ARM V7 CPU core */
> +#define CONFIG_TEGRA2			/* in a NVidia Tegra2 core */
> +#define CONFIG_MACH_TEGRA_GENERIC	/* which is a Tegra generic machine */
> +#define CONFIG_L2_OFF			/* No L2 cache */
> +
> +#include <asm/arch/tegra2.h>		/* get chip and board defs */
> +
> +/*
> + * Display CPU and Board information
> + */
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DISPLAY_BOARDINFO
> +
> +#undef CONFIG_USE_IRQ

The general policy is not to undef things unless its necessary.
Assuming CONFIG_USE_IRQ isn't defined elsewhere I'd remove the above
line.

> +
> +#define CONFIG_SKIP_RELOCATE_UBOOT
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +
> +#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
> +
> +/* Environment */
> +#define CONFIG_ENV_IS_NOWHERE
> +#define CONFIG_ENV_SIZE			0x20000	/* Total Size Environment */
> +
> +/*
> + * Size of malloc() pool
> + */
> +#define CONFIG_SYS_MALLOC_LEN		(4 << 20)	/* 4MB  */
> +
> +/*
> + * PllX Configuration
> + */
> +#define CONFIG_SYS_CPU_OSC_FREQUENCY	1000000	/* Set CPU clock to 1GHz */
> +
> +/*
> + * NS16550 Configuration
> + */
> +#define V_NS16550_CLK			216000000	/* 216MHz (pllp_out0) */
> +
> +#define CONFIG_SYS_NS16550
> +#define CONFIG_SYS_NS16550_SERIAL
> +#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
> +#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
> +
> +/*
> + * select serial console configuration
> + */
> +#define CONFIG_CONS_INDEX	1
> +
> +/* allow to overwrite serial and ethaddr */
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_BAUDRATE			115200
> +#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
> +					115200}
> +
> +/* include default commands */
> +#include <config_cmd_default.h>
> +
> +/* remove unused commands */
> +#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect */
> +#undef CONFIG_CMD_FPGA		/* FPGA configuration support */
> +#undef CONFIG_CMD_IMI
> +#undef CONFIG_CMD_IMLS
> +#undef CONFIG_CMD_NFS		/* NFS support */
> +#undef CONFIG_CMD_NET		/* network support */
> +
> +/* turn on command-line edit/hist/auto */
> +#define CONFIG_CMDLINE_EDITING
> +#define CONFIG_COMMAND_HISTORY
> +#define CONFIG_AUTOCOMPLETE
> +
> +#define CONFIG_SYS_NO_FLASH
> +
> +/* Environment information */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +	"console=ttyS0,115200n8\0" \
> +	"mem=" TEGRA2_SYSMEM "\0" \
> +	"smpflag=smp\0" \
> +
> +#define CONFIG_LOADADDR		0x408000	/* def. location for kernel */
> +#define CONFIG_BOOTDELAY	2		/* -1 to disable auto boot */
> +
> +/*
> + * Miscellaneous configurable options
> + */
> +#define CONFIG_SYS_LONGHELP		/* undef to save memory */
> +#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
> +#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
> +#define CONFIG_SYS_PROMPT		V_PROMPT
> +/*
> + * Increasing the size of the IO buffer as default nfsargs size is more
> + *  than 256 and so it is not possible to edit it
> + */
> +#define CONFIG_SYS_CBSIZE		(256 * 2) /* Console I/O Buffer Size */
> +/* Print Buffer Size */
> +#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
> +					sizeof(CONFIG_SYS_PROMPT) + 16)
> +#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
> +/* Boot Argument Buffer Size */
> +#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
> +
> +#define CONFIG_SYS_MEMTEST_START	(TEGRA2_SDRC_CS0 + 0x600000)
> +#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
> +
> +#define CONFIG_SYS_LOAD_ADDR		(0xA00800)	/* default */
> +#define CONFIG_SYS_HZ			1000
> +
> +/*-----------------------------------------------------------------------
> + * Stack sizes
> + *
> + * The stack sizes are set up in start.S using the settings below
> + */
> +#define CONFIG_STACKBASE	0x2800000	/* 40MB */
> +#define CONFIG_STACKSIZE	0x20000		/* 128K regular stack*/
> +#ifdef CONFIG_USE_IRQ
> +#define CONFIG_STACKSIZE_IRQ	0x1000		/* 4K IRQ stack */
> +#define CONFIG_STACKSIZE_FIQ	0x1000		/* 4K FIQ stack */
> +#endif
> +
> +/*-----------------------------------------------------------------------
> + * Physical Memory Map
> + */
> +#define CONFIG_NR_DRAM_BANKS	1
> +#define PHYS_SDRAM_1		TEGRA2_SDRC_CS0
> +#define PHYS_SDRAM_1_SIZE	0x20000000	/* 512M */
> +
> +#define CONFIG_SYS_TEXT_BASE	0x00E08000
> +#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
> +
> +#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_STACKBASE
> +#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
> +#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
> +						CONFIG_SYS_INIT_RAM_SIZE - \
> +						GENERATED_GBL_DATA_SIZE)
> +
> +#endif /* __CONFIG_H */

The endif comment should be changed to match the define at the top of
the file.

Regards,
Peter



More information about the U-Boot mailing list