[U-Boot] [PATCH 1/3] MC13892: Add SWx buck switchers definitions

[Jason Liu]

Hi, Marek,

2011/1/19 Marek Vasut <marek.vasut at gmail.com>:
> Define voltages configurable on SWx buck switchers.
>
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
> ---
>  include/mc13892.h |   35 +++++++++++++++++++++++++++++++++++
>  1 files changed, 35 insertions(+), 0 deletions(-)
>
> diff --git a/include/mc13892.h b/include/mc13892.h
> index 61c3e6e..6d86e55 100644
> --- a/include/mc13892.h
> +++ b/include/mc13892.h
> @@ -160,4 +160,39 @@
>  /* Reg Power Control 2*/
>  #define WDIRESET       (1 << 12)
>
> +/* Buck Switchers (SW1,2,3,4) Output Voltage */
> +#define SWx_0_600V     0
> +#define SWx_0_625V     1
> +#define SWx_0_650V     2
> +#define SWx_0_675V     3
> +#define SWx_0_700V     4
> +#define SWx_0_725V     5
> +#define SWx_0_750V     6
> +#define SWx_0_775V     7
> +#define SWx_0_800V     8
> +#define SWx_0_825V     9
> +#define SWx_0_850V     10
> +#define SWx_0_875V     11
> +#define SWx_0_900V     12
> +#define SWx_0_925V     13
> +#define SWx_0_950V     14
> +#define SWx_0_975V     15
> +#define SWx_1_000V     16
> +#define SWx_1_025V     17
> +#define SWx_1_050V     18
> +#define SWx_1_075V     19
> +#define SWx_1_100V     20
> +#define SWx_1_125V     21
> +#define SWx_1_150V     22
> +#define SWx_1_175V     23
> +#define SWx_1_200V     24
> +#define SWx_1_225V     25
> +#define SWx_1_250V     26
> +#define SWx_1_275V     27
> +#define SWx_1_300V     28
> +#define SWx_1_325V     29
> +#define SWx_1_350V     30
> +#define SWx_1_375V     31
> +#define SWx_VOLT_MASK  0x1F

This definition is for SWxHI=0 (Volts), had better state it in the comments,

> +
>  #endif
> --
> 1.7.2.3
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>