[U-Boot] [PATCH 2/3 RESEND] MX51EVK: Use SWx macros in PMIC init

[Marek Vasut]

On Wednesday 19 January 2011 12:15:33 Sergei Shtylyov wrote:
> On 19-01-2011 2:19, Marek Vasut wrote:
> > Signed-off-by: Marek Vasut<marek.vasut at gmail.com>
> 
> [...]
> 
> > diff --git a/board/freescale/mx51evk/mx51evk.c
> > b/board/freescale/mx51evk/mx51evk.c index 2160d5a..bcf1934 100644
> > --- a/board/freescale/mx51evk/mx51evk.c
> > +++ b/board/freescale/mx51evk/mx51evk.c
> > @@ -198,17 +198,18 @@ static void power_init(void)
> > 
> >   	/* Set core voltage to 1.1V */
> >   	val = pmic_reg_read(REG_SW_0);
> > 
> > -	val = (val&  (~0x1F)) | 0x14;
> > +	val = (val&  (~SWx_VOLT_MASK)) | SWx_1_100V;
> > 
> >   	pmic_reg_write(REG_SW_0, val);
> >   	
> >   	/* Setup VCC (SW2) to 1.25 */
> >   	val = pmic_reg_read(REG_SW_1);
> > 
> > -	val = (val&  (~0x1F)) | 0x1A;
> > +	val = (val&  (~SWx_VOLT_MASK)) | SWx_1_250V;
> > +
> 
>     Stray newline?

Nice catch, thanks
> 
> WBR, Sergei