[U-Boot] [PATCH V3 04/11] I2C: mxc_i2c: get rid of __REG access
Stefano Babic
sbabic at denx.de
Thu Jan 20 18:50:44 CET 2011
This driver accesses to processor's register
via __REG macros, that are removed (or are planned
to be removed) and replaced by C structures.
This patches replaces all occurrencies of __REG macros.
Signed-off-by: Stefano Babic <sbabic at denx.de>
CC: Heiko Schocher <hs at denx.de>
---
Changes:
- fix code styling issues
- replace __FUNCTION__ with __func__
drivers/i2c/mxc_i2c.c | 72 ++++++++++++++++++++++++++++++-------------------
1 files changed, 44 insertions(+), 28 deletions(-)
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 7f669ff..fd6db18 100755
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -23,6 +23,7 @@
*/
#include <common.h>
+#include <asm/io.h>
#if defined(CONFIG_HARD_I2C)
@@ -81,15 +82,26 @@ static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960,
1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840};
+static inline void i2c_reset(void)
+{
+ writew(0, I2C_BASE + I2CR); /* Reset module */
+ writew(0, I2C_BASE + I2SR);
+ writew(I2CR_IEN, I2C_BASE + I2CR);
+}
+
void i2c_init(int speed, int unused)
{
int freq;
int i;
#if defined(CONFIG_MX31)
+ struct clock_control_regs *sc_regs =
+ (struct clock_control_regs *)CCM_BASE;
+
freq = mx31_get_ipg_clk();
/* start the required I2C clock */
- __REG(CCM_CGR0) = __REG(CCM_CGR0) | (3 << I2C_CLK_OFFSET);
+ writel(readl(&sc_regs->cgr0) | (3 << I2C_CLK_OFFSET),
+ &sc_regs->cgr0);
#else
freq = mxc_get_clock(MXC_IPG_PERCLK);
#endif
@@ -98,30 +110,28 @@ void i2c_init(int speed, int unused)
if (freq / div[i] <= speed)
break;
- DPRINTF("%s: speed: %d\n",__FUNCTION__, speed);
+ debug("%s: speed: %d\n", __func__, speed);
- __REG16(I2C_BASE + I2CR) = 0; /* Reset module */
- __REG16(I2C_BASE + IFDR) = i;
- __REG16(I2C_BASE + I2CR) = I2CR_IEN;
- __REG16(I2C_BASE + I2SR) = 0;
+ writew(i, I2C_BASE + IFDR);
+ i2c_reset();
}
static int wait_busy(void)
{
int timeout = 10000;
- while (!(__REG16(I2C_BASE + I2SR) & I2SR_IIF) && --timeout)
+ while (!(readw(I2C_BASE + I2SR) & I2SR_IIF) && --timeout)
udelay(1);
- __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
+ writew(0, I2C_BASE + I2SR); /* clear interrupt */
return timeout;
}
static int tx_byte(u8 byte)
{
- __REG16(I2C_BASE + I2DR) = byte;
+ writew(byte, I2C_BASE + I2DR);
- if (!wait_busy() || __REG16(I2C_BASE + I2SR) & I2SR_RX_NO_AK)
+ if (!wait_busy() || readw(I2C_BASE + I2SR) & I2SR_RX_NO_AK)
return -1;
return 0;
}
@@ -131,27 +141,27 @@ static int rx_byte(void)
if (!wait_busy())
return -1;
- return __REG16(I2C_BASE + I2DR);
+ return readw(I2C_BASE + I2DR);
}
int i2c_probe(uchar chip)
{
int ret;
- __REG16(I2C_BASE + I2CR) = 0; /* Reset module */
- __REG16(I2C_BASE + I2CR) = I2CR_IEN;
+ writew(0, I2C_BASE + I2CR); /* Reset module */
+ writew(I2CR_IEN, I2C_BASE + I2CR);
- __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX;
+ writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX, I2C_BASE + I2CR);
ret = tx_byte(chip << 1);
- __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MTX;
+ writew(I2CR_IEN | I2CR_MTX, I2C_BASE + I2CR);
return ret;
}
static int i2c_addr(uchar chip, uint addr, int alen)
{
- __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
- __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX;
+ writew(0, I2C_BASE + I2SR);
+ writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX, I2C_BASE + I2CR);
if (tx_byte(chip << 1))
return -1;
@@ -167,35 +177,40 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
int timeout = 10000;
int ret;
- DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",__FUNCTION__, chip, addr, alen, len);
+ debug("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",
+ __func__, chip, addr, alen, len);
if (i2c_addr(chip, addr, alen)) {
printf("i2c_addr failed\n");
return -1;
}
- __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX | I2CR_RSTA;
+ writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX | I2CR_RSTA, I2C_BASE + I2CR);
if (tx_byte(chip << 1 | 1))
return -1;
- __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | ((len == 1) ? I2CR_TX_NO_AK : 0);
+ writew(I2CR_IEN | I2CR_MSTA |
+ ((len == 1) ? I2CR_TX_NO_AK : 0),
+ I2C_BASE + I2CR);
- ret = __REG16(I2C_BASE + I2DR);
+ ret = readw(I2C_BASE + I2DR);
while (len--) {
if ((ret = rx_byte()) < 0)
return -1;
*buf++ = ret;
if (len <= 1)
- __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_TX_NO_AK;
+ writew(I2CR_IEN | I2CR_MSTA |
+ I2CR_TX_NO_AK,
+ I2C_BASE + I2CR);
}
wait_busy();
- __REG16(I2C_BASE + I2CR) = I2CR_IEN;
+ writew(I2CR_IEN, I2C_BASE + I2CR);
- while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
+ while (readw(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
udelay(1);
return 0;
@@ -203,8 +218,9 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
{
- int timeout = 10000;
- DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",__FUNCTION__, chip, addr, alen, len);
+ int timeout = I2C_MAX_TIMEOUT;
+ debug("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",
+ __func__, chip, addr, alen, len);
if (i2c_addr(chip, addr, alen))
return -1;
@@ -213,9 +229,9 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
if (tx_byte(*buf++))
return -1;
- __REG16(I2C_BASE + I2CR) = I2CR_IEN;
+ writew(I2CR_IEN, I2C_BASE + I2CR);
- while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
+ while (readw(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
udelay(1);
return 0;
--
1.7.1
More information about the U-Boot
mailing list