[U-Boot] [PATCH V3 08/11] SPI: mxc_spi: fix swapping bug and add missing swapping in unaligned rx case

Stefano Babic sbabic at denx.de
Thu Jan 20 18:53:06 CET 2011


From: Anatolij Gustschin <agust at denx.de>

We need to shift only one time in each cycle in the swapping loop
for unaligned tx case. Currently two byte shift operations are
performed in each loop cycle causing zero gaps in the transmited
data, so not all data scheduled for transmition is actually
transmited.

The proper swapping in unaligned rx case is missing, so add it
as we need to put the received data into the rx buffer in the
correct byte order.

Signed-off-by: Anatolij Gustschin <agust at denx.de>
Tested-by: Stefano Babic <sbabic at denx.de>
---

Changes:
	- code styling

 drivers/spi/mxc_spi.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 5670714..dadf228 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -372,9 +372,8 @@ int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen,
 			/* Buffer is not 32-bit aligned */
 			if ((unsigned long)dout & 0x03) {
 				data = 0;
-				for (i = 0; i < 4; i++, data <<= 8) {
+				for (i = 0; i < 4; i++)
 					data = (data << 8) | (*dout++ & 0xFF);
-				}
 			} else {
 				data = *(u32 *)dout;
 				data = cpu_to_be32(data);
@@ -405,11 +404,11 @@ int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen,
 	if (bitlen % 32) {
 		data = reg_read(mxcs->base + MXC_CSPIRXDATA);
 		cnt = (bitlen % 32) / 8;
+		data = cpu_to_be32(data) >> ((sizeof(data) - cnt) * 8);
 		debug("SPI Rx unaligned: 0x%x\n", data);
 		if (din) {
-			for (i = 0; i < cnt; i++, data >>= 8) {
-				*din++ = data & 0xFF;
-			}
+			memcpy(din, &data, cnt);
+			din += cnt;
 		}
 		nbytes -= cnt;
 	}
-- 
1.7.1



More information about the U-Boot mailing list