[U-Boot] [PATCH 00/14] powerpc/p4080: add support for FMan ethernet in Independent mode

[Mingkai Hu]

This patchset add support for the P4080's datapath accelation architecture
in independent mode, and do some code refactor of the file tsec.c.

1. Add the releated MAC controller support, includeing dTSEC and 10GEC
2. Add support for FMan ethernet in Independent mode
3. Add PHY support (VSC8244 and VSC8234) to a new file fsl_phy.c which
   can be reused by other code, such tsec and uec code.
4. tsec code cleanup
5. Move all the PHY code in tsec.c to fsl_phy.c to make it reuseable.

Based on the latest WD's U-Boot tree. Tested on P4080DS and MPC8536DS
board with SGMII card.

[PATCH 01/14] powerpc/p4080: Add function to report which lane is used for a prtcl
[PATCH 02/14] powerpc/fman: add PHY support for dTSEC
[PATCH 03/14] powerpc/fman: add dTSEC controller support
[PATCH 04/14] powerpc/fman: add 10GEC controller and PHY support
[PATCH 05/14] powerpc/qoirq: Add support for FMan ethernet in Independent mode
[PATCH 06/14] powerpc/corenet_ds: Add fman support
[PATCH 07/14] tsec: use IO accessories to access the register
[PATCH 08/14] tsec: arrange the code to avoid useless function declaration
[PATCH 09/14] tsec: use general ethernet MII register struct(tsec_mii_t)
[PATCH 10/14] tsec: refactor the PHY code to make it reuseable
[PATCH 11/14] PHY: add some Vitesse phy support
[PATCH 12/14] PHY: add some Broadcom phy support
[PATCH 13/14] PHY: add some Marvell phy support
[PATCH 14/14] PHY: add some misc phy code support

Thanks,
Mingkai