[U-Boot] [PATCH 00/14] powerpc/p4080: add support for FMan ethernet in Independent mode

[Kumar Gala]

On Jan 26, 2011, at 10:52 PM, Mingkai Hu wrote:

> This patchset add support for the P4080's datapath accelation architecture
> in independent mode, and do some code refactor of the file tsec.c.
> 
> 1. Add the releated MAC controller support, includeing dTSEC and 10GEC
> 2. Add support for FMan ethernet in Independent mode
> 3. Add PHY support (VSC8244 and VSC8234) to a new file fsl_phy.c which
>  can be reused by other code, such tsec and uec code.
> 4. tsec code cleanup
> 5. Move all the PHY code in tsec.c to fsl_phy.c to make it reuseable.
> 
> Based on the latest WD's U-Boot tree. Tested on P4080DS and MPC8536DS
> board with SGMII card.
> 
> [PATCH 01/14] powerpc/p4080: Add function to report which lane is used for a prtcl
> [PATCH 02/14] powerpc/fman: add PHY support for dTSEC
> [PATCH 03/14] powerpc/fman: add dTSEC controller support
> [PATCH 04/14] powerpc/fman: add 10GEC controller and PHY support
> [PATCH 05/14] powerpc/qoirq: Add support for FMan ethernet in Independent mode
> [PATCH 06/14] powerpc/corenet_ds: Add fman support
> [PATCH 07/14] tsec: use IO accessories to access the register
> [PATCH 08/14] tsec: arrange the code to avoid useless function declaration
> [PATCH 09/14] tsec: use general ethernet MII register struct(tsec_mii_t)
> [PATCH 10/14] tsec: refactor the PHY code to make it reuseable
> [PATCH 11/14] PHY: add some Vitesse phy support
> [PATCH 12/14] PHY: add some Broadcom phy support
> [PATCH 13/14] PHY: add some Marvell phy support
> [PATCH 14/14] PHY: add some misc phy code support
> 
> Thanks,
> Mingkai

I suggest we re-order these patches to first deal with tsec changes and refactor of the phy code.  After which we should introduce fman driver code that shares fsl_phy.c

These patches also break some fundamental rules about patches:
1. some patches aren't used by anything
2. some patches break functionality

- k