[U-Boot] [PATCH 1/6] mtd: add writebufsize field to mtd_info struct

[Detlev Zundel]

Hi Stefan,

do you have any comment on this series?  I delegated the patches to you
in patchwork already :)  No seriously, the patches look sane and are in
accordance to what is done in Linux....

> This field will be used to indicate the write buffer size
> of the MTD device. UBI will set it's minimal I/O unit size
> (min_io_size) to the indicated write buffer size. By this
> change we intend to fix failed recovery of UBIFS partitions
> we currently observe on NOR flash when mounting the partition
> after unclean unmount.
>
> Currently the min_io_size is set to mtd->writesize (which is 1
> byte for NOR flash). But flash programming is often done from
> prepared write buffer containing multiple bytes and is performed
> in one programming operation which could be interrupted by a power
> cut or a system reset causing corrupted (partially written) areas
> in a flash sector. Knowing the size of potentially corrupted areas
> UBIFS scanning and recovery algorithms are able to perform
> successful recovery.
>
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>

Thanks
  Detlev

-- 
vi vi vi - the roman numeral of the beast.
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de