[U-Boot] [PATCH 5/6] powerpc/85xx: do not initialize QE if QE's firmware is in nand flash

[Haiying Wang]

On Mon, 2011-01-31 at 21:08 +0100, Wolfgang Denk wrote:
> Dear Haiying.Wang at freescale.com,
> 
> In message <1296499317-26616-6-git-send-email-Haiying.Wang at freescale.com> you wrote:
> > From: Haiying Wang <Haiying.Wang at freescale.com>
> > 
> > For some board which doesn't have NOR flash and the QE's firmware(ucode) is
> > saved in its NAND flash, we don't want call qe_init in cpu_init_r, but will
> > call it later after nand is initialized.
> 
> Is there a pressing reason to do this so early for other boards?  Can
> not all boards initialize this later?
> 
My understanding is that QE is a cpu feature, so it is called early in
cpu_init_r. As Kumar recommended before, I can move qe_init from
cpu_init_r to misc_init_r for every 85xx boards with qe support. Is it
acceptable to you?

Haiying