[U-Boot] [PATCH 1/2] powerpc/85xx: remove SERDES4 soft-reset work-around

[Kumar Gala]

From: Timur Tabi <timur at freescale.com>

Some P4080 rev1 errata work-arounds, notably erratum SERDES4, required a
bank soft-reset after the bank was configured and enabled, even though enabling
a bank causes it to reset.  Because the reset was required for multiple errata,
it was not properly enclosed in an #ifdef, and so was not removed with all the
other rev1 errata work-arounds.

Because this was the only SERDES bank soft-reset, there is no need to implement
a work-around for erratum SERDES-A003.

Signed-off-by: Timur Tabi <timur at freescale.com>
---
 arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 741a0f8..e78d32d 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -729,9 +729,6 @@ void fsl_serdes_init(void)
 		}
 #endif
 
-		/* reset banks for errata */
-		setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_RST);
-
 		wait_for_rstdone(bank);
 	}
 
-- 
1.7.3.4