[U-Boot] [PATCH 3/3] arm: omap: innovator: use common code for machine type

[Igor Grinberg]

Innovator and H2 boards used machine_is_* macros for setting the machine
type. These macros are expanded in compile time and thus leaves
unreachable code (though gcc might optimize it).
Switch them to use common code for machine type setting.

Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
---
 board/ti/omap1610inn/omap1610innovator.c |    7 -------
 include/configs/omap1610h2.h             |    3 ++-
 include/configs/omap1610inn.h            |    3 ++-
 3 files changed, 4 insertions(+), 9 deletions(-)

diff --git a/board/ti/omap1610inn/omap1610innovator.c b/board/ti/omap1610inn/omap1610innovator.c
index 44818bb..16e8237 100644
--- a/board/ti/omap1610inn/omap1610innovator.c
+++ b/board/ti/omap1610inn/omap1610innovator.c
@@ -63,13 +63,6 @@ static inline void delay (unsigned long loops)
 
 int board_init (void)
 {
-	if (machine_is_omap_h2())
-		gd->bd->bi_arch_number = MACH_TYPE_OMAP_H2;
-	else if (machine_is_omap_innovator())
-		gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR;
-	else
-		gd->bd->bi_arch_number = MACH_TYPE_OMAP_GENERIC;
-
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x10000100;
 
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index cb2a07f..9fa3317 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -34,7 +34,8 @@
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP1610		1	/* which is in a 1610 */
 #define CONFIG_H2_OMAP1610	1	/* on an H2 Board */
-#define CONFIG_MACH_OMAP_H2		/* Select board mach-type */
+
+#define CONFIG_MACH_TYPE	MACH_TYPE_OMAP_H2
 
 /* input clock of PLL */
 /* the OMAP1610 H2 has 12MHz input clock */
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index e82b4b2..e3f3487 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -34,7 +34,8 @@
 #define CONFIG_OMAP	1			/* in a TI OMAP core    */
 #define CONFIG_OMAP1610	1		/* which is in a 1610  */
 #define CONFIG_INNOVATOROMAP1610	1	/*  a Innovator Board  */
-#define CONFIG_MACH_OMAP_INNOVATOR	/* Select board mach-type */
+
+#define CONFIG_MACH_TYPE	MACH_TYPE_OMAP_INNOVATOR
 
 /* input clock of PLL */
 /* the OMAP1610 Innovator has 12MHz input clock */
-- 
1.7.3.4