[U-Boot] [PATCH] scb9328: Add ARM relocation support

[Torsten Koschorrek]

Torsten Koschorrek wrote:
> Hello,
>
> Stefano Babic wrote:
>> On 06/10/2011 07:44 AM, Torsten Koschorrek wrote:
>> Hi Torsten,
>>
>> send your answer to the ML, too. Someone else can help you ;-)
>>
>
> Oh, yes, right. This little 'Reply All' Button, sorry :-)
>
>>>> size1 = get_ram_size((volatile void *)SCB9328_SDRAM_1,
>>>>       SCB9328_SDRAM_1_SIZE);
>>>> #if ( CONFIG_NR_DRAM_BANKS>    1 )
>>>> size2 = get_ram_size((volatile void *)SCB9328_SDRAM_2,
>>>>       SCB9328_SDRAM_2_SIZE);
>>>> .....
>>>>
>>>> and then:
>>>>       gd->ram_size = size1 + size2 + size3 + size4;
>>>>
>>>
>>> Yes, I thought about it. The thing is, we only have one bank on the
>>> system. So, dram_init_banksize() needs a cleanup, but that's a problem
>>> for another cleanup-patch, which will be committed in a next step.
>>>
>>> (If it's needed I could do a minor cleanup first...)
>>
>> You decide. However, the code in the patch is wrong. If you have only
>> one bank, you could directly simplify your code, I think.
>>
>
> Good point.
>
>>>
>>> Unfortunately I have to work on another project today and next week and
>>> I think I'm not able to solve the hanging problem.
>>
>> Understood, I tried only to give you some hints where to check ;-)
>>
>
> ... and I appreciate that very much :-) Above all, your answers showed
> me, that I was looking in the right direction so far.
>
>>> Minor fixes (such as
>>> config.mk) for the above patch should be possible, though.
>>
>> Ok, agree. Fix first the problem to make MAKEALL happy and build the
>> board again.
>>
>
> OK, I just tested it again, MAKEALL is happy.
>
> 'include/configs/scb9328.h' is the only file that has to be patched with
> the patch already send to the ml. 'board/scb9328/config.mk' and
> 'board/scb9328/scb9328.c' definately need a cleanup, but compilation is
> ok. The cleanup of those two files 'll be done next week. And hopefully
> I find some time next week to work on the hangup problem, too.
>

What's the status of this patch? Do I need to resend a modified version 
without config.mk and scb9328.c? Or I could do a small cleanup as 
discussed in this thread. But as I said, MAKEALL is happy with the 
modified scb9328.h

thanks
Torsten