[U-Boot] [PATCH v2] Armada100: Add Board Support for Marvell GuruPlug-Display
Ajay Bhargav
ajay.bhargav at einfochips.com
Tue Jul 5 09:17:16 CEST 2011
This patch adds basic board support with DRAM and UART functionality
v2 - Updated MAINTAINERS file as suggested by Prafulla.
Signed-off-by: Ajay Bhargav <ajay.bhargav at einfochips.com>
Acked-by: Tanmay Upadhyay <tanmay.upadhyay at einfochips.com>
---
MAINTAINERS | 4 +
MAKEALL | 1 +
arch/arm/include/asm/arch-armada100/mfp.h | 4 +-
board/Marvell/gplugd/Makefile | 57 +++++++++++++++++++
board/Marvell/gplugd/gplugd.c | 62 ++++++++++++++++++++
boards.cfg | 1 +
include/configs/gplugd.h | 87 +++++++++++++++++++++++++++++
7 files changed, 214 insertions(+), 2 deletions(-)
create mode 100644 board/Marvell/gplugd/Makefile
create mode 100644 board/Marvell/gplugd/gplugd.c
create mode 100644 include/configs/gplugd.h
diff --git a/MAINTAINERS b/MAINTAINERS
index e2c48a8..0b0c53d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -590,6 +590,10 @@ Eric Benard <eric at eukrea.com>
cpu9260 ARM926EJS (AT91SAM9260 SoC)
cpu9G20 ARM926EJS (AT91SAM9G20 SoC)
+Ajay Bhargav <ajay.bhargav at einfochips.com>
+
+ gplugd ARM926EJS (ARMADA100 88AP168 SoC)
+
Rishi Bhattacharya <rishi at ti.com>
omap5912osk ARM926EJS
diff --git a/MAKEALL b/MAKEALL
index d592374..259da84 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -388,6 +388,7 @@ LIST_ARM9=" \
davinci_dm355leopard \
davinci_dm365evm \
davinci_dm6467evm \
+ gplugd \
"
#########################################################################
diff --git a/arch/arm/include/asm/arch-armada100/mfp.h b/arch/arm/include/asm/arch-armada100/mfp.h
index 73783a7..d6e0494 100644
--- a/arch/arm/include/asm/arch-armada100/mfp.h
+++ b/arch/arm/include/asm/arch-armada100/mfp.h
@@ -57,8 +57,8 @@
#define MFP89_UART2_TXD (MFP_REG(0x0164) | MFP_AF2 | MFP_DRIVE_MEDIUM)
/* UART3 */
-#define MFPO8_UART3_RXD (MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM)
-#define MFPO9_UART3_TXD (MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+#define MFPO8_UART3_TXD (MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM)
+#define MFPO9_UART3_RXD (MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM)
/* I2c */
#define MFP105_CI2C_SDA (MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM)
diff --git a/board/Marvell/gplugd/Makefile b/board/Marvell/gplugd/Makefile
new file mode 100644
index 0000000..2d8bba0
--- /dev/null
+++ b/board/Marvell/gplugd/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2011
+# eInfochips Ltd. <www.einfochips.com>
+# Written-by: Ajay Bhargav <ajay.bhargav at einfochips.com>
+#
+# Based on Aspenite:
+# (C) Copyright 2010
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+# Contributor: Mahavir Jain <mjain at marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := gplugd.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/Marvell/gplugd/gplugd.c b/board/Marvell/gplugd/gplugd.c
new file mode 100644
index 0000000..dc7d89d
--- /dev/null
+++ b/board/Marvell/gplugd/gplugd.c
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav at einfochips.com>
+ *
+ * Based on Aspenite:
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ * Contributor: Mahavir Jain <mjain at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <mvmfp.h>
+#include <asm/arch/mfp.h>
+#include <asm/arch/armada100.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ u32 mfp_cfg[] = {
+ /* I2C */
+ MFP105_CI2C_SDA,
+ MFP106_CI2C_SCL,
+
+ /* Enable Console on UART3 */
+ MFPO8_UART3_TXD,
+ MFPO9_UART3_RXD,
+ MFP_EOC /*End of configuration*/
+ };
+ /* configure MFP's */
+ mfp_config(mfp_cfg);
+ return 0;
+}
+
+int board_init(void)
+{
+ /* arch number of Board */
+ gd->bd->bi_arch_number = MACH_TYPE_SHEEVAD;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = armd1_sdram_base(0) + 0x100;
+ return 0;
+}
diff --git a/boards.cfg b/boards.cfg
index 9f2b118..014d86b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -72,6 +72,7 @@ netstar arm arm925t
voiceblue arm arm925t
omap1510inn arm arm925t - ti
aspenite arm arm926ejs - Marvell armada100
+gplugd arm arm926ejs - Marvell armada100
afeb9260 arm arm926ejs - - at91
at91cap9adk arm arm926ejs - atmel at91
snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260
diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
new file mode 100644
index 0000000..cc14f49
--- /dev/null
+++ b/include/configs/gplugd.h
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav at einfochips.com>
+ *
+ * Based on Aspenite:
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ * Contributor: Mahavir Jain <mjain at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __CONFIG_GPLUGD_H
+#define __CONFIG_GPLUGD_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING "\nMarvell-gplugD"
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
+#define CONFIG_ARMADA100 1 /* SOC Family Name */
+#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
+#define CONFIG_MACH_SHEEVAD /* Machine type */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+#define CONFIG_SYS_TEXT_BASE 0x00f00000
+
+/*
+ * There is no internal RAM in ARMADA100, using DRAM
+ * TBD: dcache to be used for this
+ */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
+#define CONFIG_NR_DRAM_BANKS_MAX 2
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+#undef CONFIG_ARCH_MISC_INIT
+
+#ifdef CONFIG_SYS_NS16550_COM1
+#undef CONFIG_SYS_NS16550_COM1
+#endif /* CONFIG_SYS_NS16550_COM1 */
+
+#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
+
+/*
+ * Environment variables configurations
+ */
+#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
+#define CONFIG_ENV_SIZE 0x20000 /* 64k */
+
+#endif /* __CONFIG_GPLUGD_H */
--
1.7.0.4
More information about the U-Boot
mailing list