[U-Boot] [PATCH 4/4] Armada100: Adds support for USB on gplugD

[Prafulla Wadaskar]

> -----Original Message-----
> From: Ajay Bhargav [mailto:ajay.bhargav at einfochips.com]
> Sent: Friday, July 08, 2011 11:53 AM
> To: Prafulla Wadaskar
> Cc: u-boot at lists.denx.de; Ajay Bhargav
> Subject: [PATCH 4/4] Armada100: Adds support for USB on gplugD
> 
> Signed-off-by: Ajay Bhargav <ajay.bhargav at einfochips.com>
> ---
>  arch/arm/cpu/arm926ejs/armada100/Makefile          |    1 +
>  arch/arm/cpu/arm926ejs/armada100/cpu.c             |   14 ++
>  arch/arm/cpu/arm926ejs/armada100/pxa168_u2h.c      |  154
> ++++++++++++++++++++
>  arch/arm/include/asm/arch-armada100/cpu.h          |   31 ++++
>  .../include/asm/arch-armada100/pxa168_usb_phy.h    |  115
> +++++++++++++++
>  drivers/usb/host/Makefile                          |    1 +
>  drivers/usb/host/ehci-pxa168.c                     |   58 ++++++++

The file name should be mv_ehci.c

>  include/configs/gplugd.h                           |   20 +++
>  8 files changed, 394 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/cpu/arm926ejs/armada100/pxa168_u2h.c
>  create mode 100644 arch/arm/include/asm/arch-armada100/pxa168_usb_phy.h
>  create mode 100644 drivers/usb/host/ehci-pxa168.c

No pxa reference in the code, replace them by ARMD, armada100, ARMADA100

Split the patch as UAB echi driver support for armada followed by enabling it for your board.

Regards..
Prafulla ..