[U-Boot] [PATCH 2/4] Armada100: SPI Flash support for Marvell gplugD

[Ajay Bhargav]

Hi Prafulla,

Thanks, I will do that.

Regards,
Ajay Bhargav

----- Original Message -----
From: "Prafulla Wadaskar" <prafulla at marvell.com>
To: "Ajay Bhargav" <ajay.bhargav at einfochips.com>
Cc: u-boot at lists.denx.de, "Ashish Karkare" <akarkare at marvell.com>, "Prabhanjan Sarnaik" <sarnaik at marvell.com>
Sent: Friday, July 8, 2011 8:51:37 PM
Subject: RE: [PATCH 2/4] Armada100: SPI Flash support for Marvell gplugD



> -----Original Message-----
> From: Ajay Bhargav [mailto:ajay.bhargav at einfochips.com]
> Sent: Friday, July 08, 2011 11:53 AM
> To: Prafulla Wadaskar
> Cc: u-boot at lists.denx.de; Ajay Bhargav
> Subject: [PATCH 2/4] Armada100: SPI Flash support for Marvell gplugD
> 
> SPI Flash support added for Marvell GuruPlug-Display. Environment
> variables are now stored in flash.
> 
> Signed-off-by: Ajay Bhargav <ajay.bhargav at einfochips.com>
> ---
>  arch/arm/include/asm/arch-armada100/gpio.h     |    2 +-
>  arch/arm/include/asm/arch-armada100/mfp.h      |    6 +
>  arch/arm/include/asm/arch-armada100/regs-ssp.h |  165 +++++++++++++++
>  board/Marvell/gplugd/gplugd.c                  |   20 ++
>  drivers/spi/Makefile                           |    1 +
>  drivers/spi/pxa3xx_spi.c                       |  256

The file name should be mvspi.c

> ++++++++++++++++++++++++
>  include/configs/gplugd.h                       |   32 +++-

Split this patch as SPI driver support for Armada100 followed by enabling it for this board addressing GPIOs separately.

Regards..
Prafulla . .

-- 
This message has been scanned for viruses and
dangerous content by Clean Mail Gateway, and is
believed to be clean.

*************************************************************************************************************************************************************
einfochips Business Disclaimer : This e-mail message and all attachments transmitted with it are intended solely for the use of the addressee and may contain legally privileged and confidential information. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by replying to this message and please delete it from your computer. Any views expressed in this message are those of the individual sender unless otherwise stated. Company has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email.
*************************************************************************************************************************************************************