[U-Boot] [PATCH 1/2] powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014
Kumar Gala
galak at kernel.crashing.org
Mon Jul 11 18:11:50 CEST 2011
On Jun 30, 2011, at 11:11 PM, Kumar Gala wrote:
> From: Ramneek Mehresh <ramneek.mehresh at freescale.com>
>
> Add UTMI and ULPI PHY support for USB controller on qoriq series of
> processors with internal UTMI PHY implemented, for example P1010/P1014
> - Use both getenv() and hwconfig to get USB phy type till getenv()
> is depricated
> - Introduce CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY to specify if soc
> has internal UTMI phy
>
> Signed-off-by: Ramneek Mehresh <ramneek.mehresh at freescale.com>
> CC: Remy Bohmer <linux at bohmer.net>
> Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
> ---
> arch/powerpc/include/asm/config_mpc85xx.h | 2 +
> drivers/usb/host/ehci-fsl.c | 37 ++++++++++++++++++++++++++--
> 2 files changed, 36 insertions(+), 3 deletions(-)
Remy,
Forgot to CC you on this, any comments / concerns ?
- k
>
> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
> index 04ca989..d9d04e7 100644
> --- a/arch/powerpc/include/asm/config_mpc85xx.h
> +++ b/arch/powerpc/include/asm/config_mpc85xx.h
> @@ -97,6 +97,7 @@
> #define CONFIG_NUM_DDR_CONTROLLERS 1
> #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
> #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
> +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
>
> /* P1011 is single core version of P1020 */
> #elif defined(CONFIG_P1011)
> @@ -141,6 +142,7 @@
> #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
> #define CONFIG_NUM_DDR_CONTROLLERS 1
> #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
> +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
>
> /* P1015 is single core version of P1024 */
> #elif defined(CONFIG_P1015)
> diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
> index 6e0043a..66b7da5 100644
> --- a/drivers/usb/host/ehci-fsl.c
> +++ b/drivers/usb/host/ehci-fsl.c
> @@ -1,5 +1,5 @@
> /*
> - * (C) Copyright 2009 Freescale Semiconductor, Inc.
> + * (C) Copyright 2009, 2011 Freescale Semiconductor, Inc.
> *
> * (C) Copyright 2008, Excito Elektronik i Sk=E5ne AB
> *
> @@ -26,6 +26,7 @@
> #include <usb.h>
> #include <asm/io.h>
> #include <usb/ehci-fsl.h>
> +#include <hwconfig.h>
>
> #include "ehci.h"
> #include "ehci-core.h"
> @@ -39,6 +40,11 @@
> int ehci_hcd_init(void)
> {
> struct usb_ehci *ehci;
> + char usb_phy[5];
> + const char *phy_type = NULL;
> + size_t len;
> +
> + usb_phy[0] = '\0';
>
> ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB_ADDR;
> hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
> @@ -52,10 +58,35 @@ int ehci_hcd_init(void)
> out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
>
> /* Init phy */
> - if (!strcmp(getenv("usb_phy_type"), "utmi"))
> - out_le32(&(hcor->or_portsc[0]), PORT_PTS_UTMI);
> + if (hwconfig_sub("usb1", "phy_type"))
> + phy_type = hwconfig_subarg("usb1", "phy_type", &len);
> else
> + phy_type = getenv("usb_phy_type");
> + if (!phy_type) {
> +#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
> + /* if none specified assume internal UTMI */
> + strcpy(usb_phy, "utmi");
> + phy_type = usb_phy;
> +#else
> + printf("WARNING: USB phy type not defined !!\n");
> + return -1;
> +#endif
> + }
> + if (!strcmp(phy_type, "utmi")) {
> +#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
> + setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI);
> + setbits_be32(&ehci->control, UTMI_PHY_EN);
> + udelay(1000); /* delay required for PHY Clk to appear */
> +#endif
> + out_le32(&(hcor->or_portsc[0]), PORT_PTS_UTMI);
> + } else {
> +#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
> + clrbits_be32(&ehci->control, UTMI_PHY_EN);
> + setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI);
> + udelay(1000); /* delay required for PHY Clk to appear */
> +#endif
> out_le32(&(hcor->or_portsc[0]), PORT_PTS_ULPI);
> + }
>
> /* Enable interface. */
> setbits_be32(&ehci->control, USB_EN);
> --
> 1.7.3.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
More information about the U-Boot
mailing list