[U-Boot] Pull request u-boot-blackfin.git

[Mike Frysinger]

The following changes since commit 68d4230c3ccce96a72c5b99e48399bf1796fe3c6:

  powerpc/85xx: Add default usb mode and phy type to hwconfig (2011-07-11 13:24:21 -0500)

are available in the git repository at:
  git://www.denx.de/git/u-boot-blackfin.git master

Harald Krapfenbauer (2):
      Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update network settings
      Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: enable mmc_spi support

Mike Frysinger (19):
      Blackfin: uart: move debug buffers into local bss
      Blackfin: uart: add multiple serial support
      Blackfin: adi boards: enable multi serial support by default
      Blackfin: dont reset SWRST on newer bf526 parts
      Blackfin: add init.elf helper code
      Blackfin: uart: fix printf warning
      Blackfin: post: setup default CONFIG_SYS_POST_WORD_ADDR
      Blackfin: gpio: optimize free path a little
      Blackfin: sync MMR read/write helpers with Linux
      Blackfin: portmux: allow header to be included in assembly files
      Blackfin: drop unused dma.h header from start code
      Blackfin: adi boards: enable pretty flash progress output
      Blackfin: split out async setup
      Blackfin: serial: convert to bfin_{read,write} helpers
      Blackfin: update anomaly lists to latest public info
      Blackfin: adi boards: also set stderr to nc with helper
      Blackfin: serial: move early debug strings into .rodata section
      Blackfin: switch to common display_options()
      Blackfin: jtag-console: fix timer usage

 Makefile                                       |    3 +-
 arch/blackfin/cpu/.gitignore                   |    3 +
 arch/blackfin/cpu/Makefile                     |    7 +-
 arch/blackfin/cpu/cpu.c                        |   16 +-
 arch/blackfin/cpu/gpio.c                       |    2 +
 arch/blackfin/cpu/init.S                       |    9 +
 arch/blackfin/cpu/init.lds.S                   |   25 +++
 arch/blackfin/cpu/initcode.c                   |   61 ++-----
 arch/blackfin/cpu/initcode.h                   |   71 +++++++
 arch/blackfin/cpu/jtag-console.c               |    4 +-
 arch/blackfin/cpu/reset.c                      |    4 +-
 arch/blackfin/cpu/serial.c                     |  234 ++++++++++++++++++------
 arch/blackfin/cpu/serial.h                     |   70 +++++---
 arch/blackfin/cpu/start.S                      |    1 -
 arch/blackfin/include/asm/blackfin_local.h     |   88 +++++-----
 arch/blackfin/include/asm/config.h             |    3 +
 arch/blackfin/include/asm/gpio.h               |    3 +-
 arch/blackfin/include/asm/mach-bf506/anomaly.h |   25 ++-
 arch/blackfin/include/asm/mach-bf518/anomaly.h |   28 ++-
 arch/blackfin/include/asm/mach-bf527/anomaly.h |   38 +++--
 arch/blackfin/include/asm/mach-bf533/anomaly.h |   23 ++-
 arch/blackfin/include/asm/mach-bf537/anomaly.h |   37 +++--
 arch/blackfin/include/asm/mach-bf538/anomaly.h |   42 +++--
 arch/blackfin/include/asm/mach-bf548/anomaly.h |  227 +++++++++++++----------
 arch/blackfin/include/asm/mach-bf561/anomaly.h |  136 ++++++++------
 arch/blackfin/include/asm/portmux.h            |    4 +
 arch/blackfin/lib/board.c                      |    6 +-
 board/cm-bf537e/cm-bf537e.c                    |   34 +++--
 board/cm-bf537u/cm-bf537u.c                    |   39 ++--
 board/tcm-bf537/tcm-bf537.c                    |   34 +++--
 common/serial.c                                |    3 +
 include/configs/bf537-stamp.h                  |    1 -
 include/configs/bfin_adi_common.h              |   12 +-
 include/configs/cm-bf537e.h                    |   20 ++-
 include/configs/cm-bf537u.h                    |   24 ++-
 include/configs/tcm-bf537.h                    |   20 ++-
 include/serial.h                               |    9 +
 37 files changed, 904 insertions(+), 462 deletions(-)
 create mode 100644 arch/blackfin/cpu/init.S
 create mode 100644 arch/blackfin/cpu/init.lds.S
 create mode 100644 arch/blackfin/cpu/initcode.h