[U-Boot] [PATCH v 5/5] omap4: clock init support for omap4460
Aneesh V
aneesh at ti.com
Sat Jul 16 18:25:38 CEST 2011
---
arch/arm/cpu/armv7/omap4/clocks.c | 61 ++++++++++++++++++++++++++---
arch/arm/include/asm/arch-omap4/clocks.h | 12 +++++-
2 files changed, 65 insertions(+), 8 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
index 0db9d18..eda960c 100644
--- a/arch/arm/cpu/armv7/omap4/clocks.c
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -66,7 +66,18 @@ static const u32 sys_clk_array[8] = {
* Please use this tool for creating the table for any new frequency.
*/
-/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo) */
+/* dpll locked at 1840 MHz MPU clk at 920 MHz(OPP Turbo 4460) - DCC OFF */
+static const struct dpll_params mpu_dpll_params_1840mhz[NUM_SYS_CLKS] = {
+ {230, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {920, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {219, 3, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {575, 11, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {460, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {920, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {575, 23, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
static const struct dpll_params mpu_dpll_params_1584mhz[NUM_SYS_CLKS] = {
{66, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */
{792, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */
@@ -320,6 +331,47 @@ u32 omap4_ddr_clk(void)
return ddr_clk;
}
+/*
+ * Lock MPU dpll
+ *
+ * Resulting MPU frequencies:
+ * 4430 ES1.0 : 600 MHz
+ * 4430 ES2.x : 792 MHz (OPP Turbo)
+ * 4460 : 920 MHz (OPP Turbo) - DCC disabled
+ */
+void configure_mpu_dpll(void)
+{
+ const struct dpll_params *params;
+ struct dpll_regs *mpu_dpll_regs;
+ u32 omap4_rev, sysclk_ind;
+
+ omap4_rev = omap_revision();
+ sysclk_ind = get_sys_clk_index();
+
+ if (omap4_rev == OMAP4430_ES1_0)
+ params = &mpu_dpll_params_1200mhz[sysclk_ind];
+ else if (omap4_rev < OMAP4460_ES1_0)
+ params = &mpu_dpll_params_1584mhz[sysclk_ind];
+ else
+ params = &mpu_dpll_params_1840mhz[sysclk_ind];
+
+ /* DCC and clock divider settings for 4460 */
+ if (omap4_rev >= OMAP4460_ES1_0) {
+ mpu_dpll_regs =
+ (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu;
+ bypass_dpll(&prcm->cm_clkmode_dpll_mpu);
+ clrbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+ MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK);
+ setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+ MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
+ clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll,
+ CM_CLKSEL_DCC_EN_MASK);
+ }
+
+ do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK);
+ debug("MPU DPLL locked\n");
+}
+
static void setup_dplls(void)
{
u32 sysclk_ind, temp;
@@ -349,12 +401,7 @@ static void setup_dplls(void)
debug("PER DPLL locked\n");
/* MPU dpll */
- if (omap_revision() == OMAP4430_ES1_0)
- params = &mpu_dpll_params_1200mhz[sysclk_ind];
- else
- params = &mpu_dpll_params_1584mhz[sysclk_ind];
- do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK);
- debug("MPU DPLL locked\n");
+ configure_mpu_dpll();
}
static void setup_non_essential_dplls(void)
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index 5d9cb50..374e064 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -105,9 +105,11 @@ struct omap4_prcm_regs {
u32 cm_ssc_deltamstep_dpll_ddrphy;
u32 pad014[5];
u32 cm_shadow_freq_config1;
+ u32 pad0141[47];
+ u32 cm_mpu_mpu_clkctrl;
/* cm1.dsp */
- u32 pad015[103];
+ u32 pad015[55];
u32 cm_dsp_clkstctrl;
u32 pad016[7];
u32 cm_dsp_dsp_clkctrl;
@@ -515,6 +517,8 @@ struct omap4_prcm_regs {
#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8)
#define CM_CLKSEL_DPLL_N_SHIFT 0
#define CM_CLKSEL_DPLL_N_MASK 0x7F
+#define CM_CLKSEL_DCC_EN_SHIFT 22
+#define CM_CLKSEL_DCC_EN_MASK (1 << 22)
#define OMAP4_DPLL_MAX_N 127
@@ -596,6 +600,12 @@ struct omap4_prcm_regs {
/* CM_L3INIT_USBPHY_CLKCTRL */
#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK 8
+/* CM_MPU_MPU_CLKCTRL */
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
+
/* Clock frequencies */
#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
--
1.7.0.4
More information about the U-Boot
mailing list