[U-Boot] [PATCH 12/52] ARM: remove broken "evb4510" board
Wolfgang Denk
wd at denx.de
Mon Jul 18 00:16:40 CEST 2011
Signed-off-by: Wolfgang Denk <wd at denx.de>
---
MAKEALL | 1 -
board/evb4510/Makefile | 51 ----
board/evb4510/config.mk | 27 --
board/evb4510/evb4510.c | 64 -----
board/evb4510/flash.c | 539 -----------------------------------------
board/evb4510/lowlevel_init.S | 157 ------------
boards.cfg | 1 -
doc/README.scrapyard | 1 +
include/configs/evb4510.h | 180 --------------
9 files changed, 1 insertions(+), 1020 deletions(-)
delete mode 100644 board/evb4510/Makefile
delete mode 100644 board/evb4510/config.mk
delete mode 100644 board/evb4510/evb4510.c
delete mode 100644 board/evb4510/flash.c
delete mode 100644 board/evb4510/lowlevel_init.S
delete mode 100644 include/configs/evb4510.h
diff --git a/MAKEALL b/MAKEALL
index 4edf61d..832119e 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -303,7 +303,6 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- evb4510 \
impa7 \
integratorap \
lpc2292sodimm \
diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile
deleted file mode 100644
index 102eade..0000000
--- a/board/evb4510/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := evb4510.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/evb4510/config.mk b/board/evb4510/config.mk
deleted file mode 100644
index 140c989..0000000
--- a/board/evb4510/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
-# Curt Brune <curt at cucy.com>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0x007d0000
diff --git a/board/evb4510/evb4510.c b/board/evb4510/evb4510.c
deleted file mode 100644
index 13abbb7..0000000
--- a/board/evb4510/evb4510.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt at cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_EVB4510
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- icache_enable();
-
- /* address for the kernel command line */
- gd->bd->bi_boot_params = 0x800;
-
- /* enable board LEDs for output */
- PUT_REG( REG_IOPDATA, 0x0);
- PUT_REG( REG_IOPMODE, 0xFFFF);
- PUT_REG( REG_IOPDATA, 0xFF);
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-#if CONFIG_NR_DRAM_BANKS == 2
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-#endif
- return 0;
-}
-
-#endif
diff --git a/board/evb4510/flash.c b/board/evb4510/flash.c
deleted file mode 100644
index c9c6e02..0000000
--- a/board/evb4510/flash.c
+++ /dev/null
@@ -1,539 +0,0 @@
-/*
- *
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt at cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-#include <flash.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-typedef enum {
- FLASH_DEV_U9_512KB = 0,
- FLASH_DEV_U7_2MB = 1
-} FLASH_DEV;
-
-#define FLASH_DQ7 (0x80)
-#define FLASH_DQ5 (0x20)
-
-#define PROG_ADDR (0xAAA)
-#define SETUP_ADDR (0xAAA)
-#define ID_ADDR (0xAAA)
-#define UNLOCK_ADDR1 (0xAAA)
-#define UNLOCK_ADDR2 (0x555)
-
-#define UNLOCK_CMD1 (0xAA)
-#define UNLOCK_CMD2 (0x55)
-#define ERASE_SUSPEND_CMD (0xB0)
-#define ERASE_RESUME_CMD (0x30)
-#define RESET_CMD (0xF0)
-#define ID_CMD (0x90)
-#define SELECT_CMD (0x90)
-#define CHIPERASE_CMD (0x10)
-#define BYPASS_CMD (0x20)
-#define SECERASE_CMD (0x30)
-#define PROG_CMD (0xa0)
-#define SETUP_CMD (0x80)
-
-#if 0
-#define WRITE_UNLOCK(addr) { \
- PUT__U8( addr + UNLOCK_ADDR1, UNLOCK_CMD1); \
- PUT__U8( addr + UNLOCK_ADDR2, UNLOCK_CMD2); \
-}
-
-/* auto select command */
-#define CMD_ID(addr) WRITE_UNLOCK(addr); { \
- PUT__U8( addr + ID_ADDR, ID_CMD); \
-}
-
-#define CMD_RESET(addr) WRITE_UNLOCK(addr); { \
- PUT__U8( addr + ID_ADDR, RESET_CMD); \
-}
-
-#define CMD_ERASE_SEC(base, addr) WRITE_UNLOCK(base); \
- PUT__U8( base + SETUP_ADDR, SETUP_CMD); \
- WRITE_UNLOCK(base); \
- PUT__U8( addr, SECERASE_CMD);
-
-#define CMD_ERASE_CHIP(base) WRITE_UNLOCK(base); \
- PUT__U8( base + SETUP_ADDR, SETUP_CMD); \
- WRITE_UNLOCK(base); \
- PUT__U8( base + SETUP_ADDR, CHIPERASE_CMD);
-
-/* prepare for bypass programming */
-#define CMD_UNLOCK_BYPASS(addr) WRITE_UNLOCK(addr); { \
- PUT__U8( addr + ID_ADDR, 0x20); \
-}
-
-/* terminate bypass programming */
-#define CMD_BYPASS_RESET(addr) { \
- PUT__U8(addr, 0x90); \
- PUT__U8(addr, 0x00); \
-}
-#endif
-
-inline static void FLASH_CMD_UNLOCK (FLASH_DEV dev, u32 base)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- PUT__U8 (base + 0xAAA, 0xAA);
- PUT__U8 (base + 0x555, 0x55);
- break;
- case FLASH_DEV_U9_512KB:
- PUT__U8 (base + 0x555, 0xAA);
- PUT__U8 (base + 0x2AA, 0x55);
- break;
- }
-}
-
-inline static void FLASH_CMD_SELECT (FLASH_DEV dev, u32 base)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0xAAA, SELECT_CMD);
- break;
- case FLASH_DEV_U9_512KB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0x555, SELECT_CMD);
- break;
- }
-}
-
-inline static void FLASH_CMD_RESET (FLASH_DEV dev, u32 base)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0xAAA, RESET_CMD);
- break;
- case FLASH_DEV_U9_512KB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0x555, RESET_CMD);
- break;
- }
-}
-
-inline static void FLASH_CMD_ERASE_SEC (FLASH_DEV dev, u32 base, u32 addr)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0xAAA, SETUP_CMD);
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (addr, SECERASE_CMD);
- break;
- case FLASH_DEV_U9_512KB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0x555, SETUP_CMD);
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (addr, SECERASE_CMD);
- break;
- }
-}
-
-inline static void FLASH_CMD_ERASE_CHIP (FLASH_DEV dev, u32 base)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0xAAA, SETUP_CMD);
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base, CHIPERASE_CMD);
- break;
- case FLASH_DEV_U9_512KB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0x555, SETUP_CMD);
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base, CHIPERASE_CMD);
- break;
- }
-}
-
-inline static void FLASH_CMD_UNLOCK_BYPASS (FLASH_DEV dev, u32 base)
-{
- switch (dev) {
- case FLASH_DEV_U7_2MB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0xAAA, BYPASS_CMD);
- break;
- case FLASH_DEV_U9_512KB:
- FLASH_CMD_UNLOCK (dev, base);
- PUT__U8 (base + 0x555, BYPASS_CMD);
- break;
- }
-}
-
-inline static void FLASH_CMD_BYPASS_RESET (FLASH_DEV dev, u32 base)
-{
- PUT__U8 (base, SELECT_CMD);
- PUT__U8 (base, 0x0);
-}
-
-/* poll for flash command completion */
-static u16 _flash_poll (FLASH_DEV dev, u32 addr, u16 data, ulong timeOut)
-{
- u32 done = 0;
- ulong t0;
-
- u16 error = 0;
- volatile u16 flashData;
-
- data = data & 0xFF;
- t0 = get_timer (0);
- while (get_timer (t0) < timeOut) {
- /* for( i = 0; i < POLL_LOOPS; i++) { */
- /* Read the Data */
- flashData = GET__U8 (addr);
-
- /* FLASH_DQ7 = Data? */
- if ((flashData & FLASH_DQ7) == (data & FLASH_DQ7)) {
- done = 1;
- break;
- }
-
- /* Check Timeout (FLASH_DQ5==1) */
- if (flashData & FLASH_DQ5) {
- /* Read the Data */
- flashData = GET__U8 (addr);
-
- /* FLASH_DQ7 = Data? */
- if (!((flashData & FLASH_DQ7) == (data & FLASH_DQ7))) {
- printf ("_flash_poll(): FLASH_DQ7 & flashData not equal to write value\n");
- error = ERR_PROG_ERROR;
- }
- FLASH_CMD_RESET (dev, addr);
- done = 1;
- break;
- }
- /* spin delay */
- udelay (10);
- }
-
-
- /* error update */
- if (!done) {
- printf ("_flash_poll(): Timeout\n");
- error = ERR_TIMOUT;
- }
-
- /* Check the data */
- if (!error) {
- /* Read the Data */
- flashData = GET__U8 (addr);
- if (flashData != data) {
- error = ERR_PROG_ERROR;
- printf ("_flash_poll(): flashData(0x%04x) not equal to data(0x%04x)\n",
- flashData, data);
- }
- }
-
- return error;
-}
-
-/*-----------------------------------------------------------------------
- */
-static int _flash_check_protection (flash_info_t * info, int s_first, int s_last)
-{
- int sect, prot = 0;
-
- for (sect = s_first; sect <= s_last; sect++)
- if (info->protect[sect]) {
- printf (" Flash sector %d protected.\n", sect);
- prot++;
- }
- return prot;
-}
-
-static int _detectFlash (FLASH_DEV dev, u32 base, u8 venId, u8 devId)
-{
-
- u32 baseAddr = base | CACHE_DISABLE_MASK;
- u8 vendorId, deviceId;
-
- /* printf(__FUNCTION__"(): detecting flash @ 0x%08x\n", base); */
-
- /* Send auto select command and read manufacturer info */
- FLASH_CMD_SELECT (dev, baseAddr);
- vendorId = GET__U8 (baseAddr);
- FLASH_CMD_RESET (dev, baseAddr);
-
- /* Send auto select command and read device info */
- FLASH_CMD_SELECT (dev, baseAddr);
-
- if (dev == FLASH_DEV_U7_2MB) {
- deviceId = GET__U8 (baseAddr + 2);
- } else if (dev == FLASH_DEV_U9_512KB) {
- deviceId = GET__U8 (baseAddr + 1);
- } else {
- return 0;
- }
-
- FLASH_CMD_RESET (dev, baseAddr);
-
- /* printf (__FUNCTION__"(): found vendorId 0x%04x, deviceId 0x%04x\n",
- vendorId, deviceId);
- */
-
- return (vendorId == venId) && (deviceId == devId);
-
-}
-
-/******************************************************************************
- *
- * Public u-boot interface functions below
- *
- *****************************************************************************/
-
-/***************************************************************************
- *
- * Flash initialization
- *
- * This board has two banks of flash, but the base addresses depend on
- * how the board is jumpered.
- *
- * The two flash types are:
- *
- * AMD Am29LV160DB (2MB) sectors layout 16KB, 2x8KB, 32KB, 31x64KB
- *
- * AMD Am29LV040B (512KB) sectors: 8x64KB
- *****************************************************************************/
-
-unsigned long flash_init (void)
-{
- flash_info_t *info;
- u16 i;
- u32 flashtest;
- s16 amd160 = -1;
- u32 amd160base = 0;
-
-#if CONFIG_SYS_MAX_FLASH_BANKS == 2
- s16 amd040 = -1;
- u32 amd040base = 0;
-#endif
-
- /* configure PHYS_FLASH_1 */
- if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_1, 0x1, 0x49)) {
- amd160 = 0;
- amd160base = PHYS_FLASH_1;
-#if CONFIG_SYS_MAX_FLASH_BANKS == 1
- }
-#else
- if (_detectFlash
- (FLASH_DEV_U9_512KB, PHYS_FLASH_2, 0x1, 0x4F)) {
- amd040 = 1;
- amd040base = PHYS_FLASH_2;
- } else {
- printf (__FUNCTION__
- "(): Unable to detect PHYS_FLASH_2: 0x%08x\n",
- PHYS_FLASH_2);
- }
- } else if (_detectFlash (FLASH_DEV_U9_512KB, PHYS_FLASH_1, 0x1, 0x4F)) {
- amd040 = 0;
- amd040base = PHYS_FLASH_1;
- if (_detectFlash (FLASH_DEV_U7_2MB, PHYS_FLASH_2, 0x1, 0x49)) {
- amd160 = 1;
- amd160base = PHYS_FLASH_2;
- } else {
- printf (__FUNCTION__
- "(): Unable to detect PHYS_FLASH_2: 0x%08x\n",
- PHYS_FLASH_2);
- }
- }
-#endif
- else {
- printf ("flash_init(): Unable to detect PHYS_FLASH_1: 0x%08x\n",
- PHYS_FLASH_1);
- }
-
- /* Configure AMD Am29LV160DB (2MB) */
- info = &flash_info[amd160];
- info->flash_id = FLASH_DEV_U7_2MB;
- info->sector_count = 35;
- info->size = 2 * 1024 * 1024; /* 2MB */
- /* 1*16K Boot Block
- 2*8K Parameter Block
- 1*32K Small Main Block */
- info->start[0] = amd160base;
- info->start[1] = amd160base + 0x4000;
- info->start[2] = amd160base + 0x6000;
- info->start[3] = amd160base + 0x8000;
- for (i = 1; i < info->sector_count; i++)
- info->start[3 + i] = amd160base + i * (64 * 1024);
-
- for (i = 0; i < info->sector_count; i++) {
- /* Write auto select command sequence and query sector protection */
- FLASH_CMD_SELECT (info->flash_id,
- info->start[i] | CACHE_DISABLE_MASK);
- flashtest =
- GET__U8 (((info->start[i] + 4) | CACHE_DISABLE_MASK));
- FLASH_CMD_RESET (info->flash_id,
- amd160base | CACHE_DISABLE_MASK);
- info->protect[i] = (flashtest & 0x0001);
- }
-
- /*
- * protect monitor and environment sectors in 2MB flash
- */
- flash_protect (FLAG_PROTECT_SET,
- amd160base, amd160base + monitor_flash_len - 1, info);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR, CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, info);
-
-#if CONFIG_SYS_MAX_FLASH_BANKS == 2
- /* Configure AMD Am29LV040B (512KB) */
- info = &flash_info[amd040];
- info->flash_id = FLASH_DEV_U9_512KB;
- info->sector_count = 8;
- info->size = 512 * 1024; /* 512KB, 8 x 64KB */
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = amd040base + i * (64 * 1024);
- /* Write auto select command sequence and query sector protection */
- FLASH_CMD_SELECT (info->flash_id,
- info->start[i] | CACHE_DISABLE_MASK);
- flashtest =
- GET__U8 (((info->start[i] + 2) | CACHE_DISABLE_MASK));
- FLASH_CMD_RESET (info->flash_id,
- amd040base | CACHE_DISABLE_MASK);
- info->protect[i] = (flashtest & 0x0001);
- }
-#endif
-
- return flash_info[0].size
-#if CONFIG_SYS_MAX_FLASH_BANKS == 2
- + flash_info[1].size
-#endif
- ;
-}
-
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_DEV_U7_2MB) {
- printf ("AMD Am29LV160DB (2MB) 16KB,2x8KB,32KB,31x64KB\n");
- } else if (info->flash_id == FLASH_DEV_U9_512KB) {
- printf ("AMD Am29LV040B (512KB) 8x64KB\n");
- } else {
- printf ("Unknown flash_id ...\n");
- return;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 4) == 0)
- printf ("\n ");
- printf (" S%02d @ 0x%08lX%s", i,
- info->start[i], info->protect[i] ? " !" : " ");
- }
- printf ("\n");
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- u16 i, error = 0;
-
- printf ("\n");
-
- /* check flash protection bits */
- if (_flash_check_protection (info, s_first, s_last)) {
- printf (" Flash erase aborted due to protected sectors\n");
- return ERR_PROTECTED;
- }
-
- if ((s_first < info->sector_count) && (s_first <= s_last)) {
- for (i = s_first; i <= s_last && !error; i++) {
- printf (" Erasing Sector %d @ 0x%08lx ... ", i,
- info->start[i]);
- /* bypass the cache to access the flash memory */
- FLASH_CMD_ERASE_SEC (info->flash_id,
- (info->
- start[0] | CACHE_DISABLE_MASK),
- (info->
- start[i] | CACHE_DISABLE_MASK));
- /* look for sector to become 0xFF after erase */
- error = _flash_poll (info->flash_id,
- info->
- start[i] | CACHE_DISABLE_MASK,
- 0xFF, CONFIG_SYS_FLASH_ERASE_TOUT);
- FLASH_CMD_RESET (info->flash_id,
- (info->
- start[0] | CACHE_DISABLE_MASK));
- printf ("done\n");
- if (error) {
- break;
- }
- }
- } else
- error = ERR_INVAL;
-
- return error;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- u16 error = 0, i;
- u32 n;
- u8 *bp, *bps;
-
- /* Write Setup */
- /* bypass the cache to access the flash memory */
- FLASH_CMD_UNLOCK_BYPASS (info->flash_id,
- (info->start[0] | CACHE_DISABLE_MASK));
-
- /* Write the Data to Flash */
-
- bp = (u8 *) (addr | CACHE_DISABLE_MASK);
- bps = (u8 *) src;
-
- for (n = 0; n < cnt && !error; n++, bp++, bps++) {
-
- if (!(n % (cnt / 15))) {
- printf (".");
- }
-
- /* write the flash command for flash memory */
- *bp = 0xA0;
-
- /* Write the data */
- *bp = *bps;
-
- /* Check if the write is done */
- for (i = 0; i < 0xff; i++);
- error = _flash_poll (info->flash_id, (u32) bp, *bps,
- CONFIG_SYS_FLASH_WRITE_TOUT);
- if (error) {
- return error;
- }
- }
-
- /* Reset the Flash Mode to read */
- FLASH_CMD_BYPASS_RESET (info->flash_id, info->start[0]);
-
- printf (" ");
-
- return error;
-}
diff --git a/board/evb4510/lowlevel_init.S b/board/evb4510/lowlevel_init.S
deleted file mode 100644
index 7184d72..0000000
--- a/board/evb4510/lowlevel_init.S
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt at cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-#include <asm/hardware.h>
-
-/***********************************************************************
- * Configure Memory Map
- *
- * This memory map allows us to relocate from FLASH to SRAM. After
- * power-on reset the CPU only knows about the FLASH memory at address
- * 0x00000000. After lowlevel_init completes the memory map will be:
- *
- * Memory Addr
- * 0x00000000
- * to 8MB SRAM (U5) -- 8MB Map
- * 0x00800000
- *
- * 0x01000000
- * to 2MB Flash @ 0x00000000 (U7) -- 2MB Map
- * 0x01200000
- *
- * 0x02000000
- * to 512KB Flash @ 0x02000000 (U9) -- 2MB Map
- * 0x02080000
- *
- * Load all 12 memory registers with the STMIA instruction since
- * memory access is disabled once these registers are written. The
- * last register written re-enables memory access. For more info see
- * the user's manual for the S3C4510B, available from Samsung's web
- * site. Search for part number "S3C4510B".
- *
- ***********************************************************************/
-
-.globl lowlevel_init
-lowlevel_init:
-
- /* preserve the temp register (r12 AKA ip) and remap it. */
- ldr r1, =SRAM_BASE+0xC
- add r0, r12, #0x01000000
- str r0, [r1]
-
- /* remap the link register for when we return */
- add lr, lr, #0x01000000
-
- /* store a short program in the on chip SRAM, which is
- * unaffected when remapping memory. Note the cache must be
- * disabled for the on chip SRAM to be available.
- */
- ldr r1, =SRAM_BASE
- ldr r0, =0xe8801ffe /* stmia r0, {r1-r12} */
- str r0, [r1]
- add r1, r1, #4
- ldr r0, =0xe59fc000 /* ldr r12, [pc, #0] */
- str r0, [r1]
- add r1, r1, #4
- ldr r0, =0xe1a0f00e /* mov pc, lr */
- str r0, [r1]
-
- adr r0, memory_map_data
- ldmia r0, {r1-r12}
- ldr r0, =REG_EXTDBWTH
-
- ldr pc, =SRAM_BASE
-
-.globl reset_cpu
-reset_cpu:
- /*
- * reset the cpu by re-mapping FLASH 0 to 0x0 and jumping to
- * address 0x0. We accomplish this by storing a few
- * instructions into the on chip SRAM (8KB) and run from
- * there. Note the cache must be disabled for the on chip
- * SRAM to be available.
- *
- * load r2 with REG_ROMCON0
- * load r3 with 0x12040060 configure FLASH bank 0 @ 0x00000000
- * load r4 with REG_DRAMCON0
- * load r5 with 0x08000380 configure RAM bank 0 @ 0x01000000
- * load r6 with REG_REFEXTCON
- * load r7 with 0x9c218360
- * load r8 with 0x0
- * store str r3,[r2] @ SRAM_BASE
- * store str r5,[r4] @ SRAM_BASE + 0x4
- * store str r7,[r6] @ SRAM_BASE + 0x8
- * store mov pc,r8 @ SRAM_BASE + 0xC
- * mov pc, SRAM_BASE
- *
- */
-
- /* disable cache */
- ldr r0, =REG_SYSCFG
- ldr r1, =0x83ffffa0 /* cache-disabled */
- str r1, [r0]
-
- ldr r2, =REG_ROMCON0
- ldr r3, =0x02000060 /* Bank0 2MB FLASH @ 0x00000000 */
- ldr r4, =REG_DRAMCON0
- ldr r5, =0x18040380 /* DRAM0 8MB SRAM @ 0x01000000 */
- ldr r6, =REG_REFEXTCON
- ldr r7, =0xce278360
- ldr r8, =0x00000000
- ldr r1, =SRAM_BASE
- ldr r0, =0xe5823000 /* str r3, [r2] */
- str r0, [r1]
- ldr r1, =SRAM_BASE+4
- ldr r0, =0xe5845000 /* str r5, [r4] */
- str r0, [r1]
- ldr r1, =SRAM_BASE+8
- ldr r0, =0xe5867000 /* str r7, [r6] */
- str r0, [r1]
- ldr r1, =SRAM_BASE+0xC
- ldr r0, =0xe1a0f008 /* mov pc, r8 */
- str r0, [r1]
- ldr r1, =SRAM_BASE
- mov pc, r1
-
- /* never return */
-
-/************************************************************************
- * Below are twelve 32-bit values for the twelve memory registers of
- * the system manager, starting with register REG_EXTDBWTH.
- ***********************************************************************/
-memory_map_data:
- .long 0x00f03005 /* memory widths */
- .long 0x12040060 /* Bank0 2MB FLASH @ 0x01000000 */
- .long 0x22080060 /* Bank1 512KB FLASH @ 0x02000000 */
- .long 0x00000000
- .long 0x00000000
- .long 0x00000000
- .long 0x00000000
- .long 0x08000380 /* DRAM0 8MB SRAM @ 0x00000000 */
- .long 0x00000000
- .long 0x00000000
- .long 0x00000000
- .long 0x9c218360 /* enable memory */
diff --git a/boards.cfg b/boards.cfg
index b5ad378..6e24534 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -45,7 +45,6 @@ impa7 arm arm720t
modnet50 arm arm720t
lpc2292sodimm arm arm720t - - lpc2292
SMN42 arm arm720t - siemens lpc2292
-evb4510 arm arm720t - - s3c4510b
a320evb arm arm920t - faraday a320
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 7200f16..8ccda3b 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+evb4510 arm arm720t - 2011-07-16
ep7312 arm arm720t - 2011-07-16 Marius Gröger <mag at sysgo.de>
B2 arm s3c44b0 - 2011-07-16 Andrea Scian <andrea.scian at dave-tech.it>
armadillo arm arm720t - 2011-07-16 Rowel Atienza <rowel at diwalabs.com>
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
deleted file mode 100644
index 23a2efa..0000000
--- a/include/configs/evb4510.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt at cucy.com>
- *
- * Configuation settings for evb4510 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start u-boot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- *
- * Also swap the flash1 and flash2 addresses during debug.
- *
- * #define CONFIG_SKIP_LOWLEVEL_INIT
- */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
-#define CONFIG_S3C4510B 1 /* it's a S3C4510B chip */
-#define CONFIG_EVB4510 1 /* on an EVB4510 Board */
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024)
-#define CONFIG_STACKSIZE_FIQ (4*1024)
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_S3C4510_ETH 1
-#define CONFIG_DRIVER_S3C4510_I2C 1
-#define CONFIG_DRIVER_S3C4510_UART 1
-#define CONFIG_DRIVER_S3C4510_FLASH 1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* we use Serial line 1, could also use 2 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 19200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_ETHADDR 00:40:95:36:35:33
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.0.0.11
-#define CONFIG_SERVERIP 10.0.0.1
-#define CONFIG_CMDLINE_TAG /* submit bootargs to kernel */
-
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTCOMMAND "tftp 100000 uImage"
-/* #define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "evb4510 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_CMDLINE_TAG /* allow passing of command line args to linux */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00780000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00000000 /* default load address */
-
-#define CONFIG_SYS_SYS_CLK_FREQ 50000000 /* CPU freq: 50 MHz */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 KHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
-*/
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map after relocation
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */
-
-#define PHYS_FLASH_1 0x01000000 /* Flash Bank #1 */
-#define PHYS_FLASH_1_SIZE 0x00200000 /* 2 MB (one chip, 8bit access) */
-
-#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
-#define PHYS_FLASH_2_SIZE 0x00080000 /* 512KB (one chip, 8bit access) */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_1_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */
-#define CONFIG_SYS_MAIN_SECT_SIZE 0x00010000 /* main size of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (4*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* environment settings */
-#define CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_NOWHERE
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x20000) /* environment start address */
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE 0x1000 /* max size for environment */
-
-#endif /* __CONFIG_H */
--
1.7.6
More information about the U-Boot
mailing list