[U-Boot] [PATCH V2 1/2] powerpc/mpc85xx: Add clear_ddr_tlbs function

[Becky Bruce]

This is useful when we just want to wipe out the TLBs.  There's
currently a function that resets the ddr tlbs to a different value;
it is changed to utilize this function.  The new function can be
used in conjunction with setup_ddr_tlbs() for a board to
temporarily map/unmap the DDR address range as needed.

Signed-off-by: Becky Bruce <beckyb at kernel.crashing.org>
---
 arch/powerpc/cpu/mpc85xx/cpu.c |   14 +++-----------
 arch/powerpc/cpu/mpc85xx/tlb.c |   29 +++++++++++++++++++++++++++++
 arch/powerpc/include/asm/mmu.h |    1 +
 3 files changed, 33 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 53f0887..ce59c25 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -374,6 +374,8 @@ void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
 unsigned int
 	setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg);
 
+void clear_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg);
+
 static void dump_spd_ddr_reg(void)
 {
 	int i, j, k, m;
@@ -460,19 +462,9 @@ static int reset_tlb(phys_addr_t p_addr, u32 size, phys_addr_t *phys_offset)
 	u32 vstart = CONFIG_SYS_DDR_SDRAM_BASE;
 	unsigned long epn;
 	u32 tsize, valid, ptr;
-	phys_addr_t rpn = 0;
 	int ddr_esel;
 
-	ptr = vstart;
-
-	while (ptr < (vstart + size)) {
-		ddr_esel = find_tlb_idx((void *)ptr, 1);
-		if (ddr_esel != -1) {
-			read_tlbcam_entry(ddr_esel, &valid, &tsize, &epn, &rpn);
-			disable_tlb(ddr_esel);
-		}
-		ptr += TSIZE_TO_BYTES(tsize);
-	}
+	clear_ddr_tlbs_phys(p_addr, size>>20);
 
 	/* Setup new tlb to cover the physical address */
 	setup_ddr_tlbs_phys(p_addr, size>>20);
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index 295f175..01a3561 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -300,4 +300,33 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
 	return
 		setup_ddr_tlbs_phys(CONFIG_SYS_DDR_SDRAM_BASE, memsize_in_meg);
 }
+
+/* Invalidate the DDR TLBs for the requested size */
+void clear_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
+{
+	u32 vstart = CONFIG_SYS_DDR_SDRAM_BASE;
+	unsigned long epn;
+	u32 tsize, valid, ptr;
+	phys_addr_t rpn = 0;
+	int ddr_esel;
+	u64 memsize = (u64)memsize_in_meg << 20;
+
+	ptr = vstart;
+
+	while (ptr < (vstart + memsize)) {
+		ddr_esel = find_tlb_idx((void *)ptr, 1);
+		if (ddr_esel != -1) {
+			read_tlbcam_entry(ddr_esel, &valid, &tsize, &epn, &rpn);
+			disable_tlb(ddr_esel);
+		}
+		ptr += TSIZE_TO_BYTES(tsize);
+	}
+}
+
+void clear_ddr_tlbs(unsigned int memsize_in_meg)
+{
+	clear_ddr_tlbs_phys(CONFIG_SYS_DDR_SDRAM_BASE, memsize_in_meg);
+}
+
+
 #endif /* !CONFIG_NAND_SPL */
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index c01c85f..ef5076b 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -489,6 +489,7 @@ extern int find_free_tlbcam(void);
 extern void print_tlbcam(void);
 
 extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
+extern void clear_ddr_tlbs(unsigned int memsize_in_meg);
 
 extern void write_tlb(u32 _mas0, u32 _mas1, u32 _mas2, u32 _mas3, u32 _mas7);
 
-- 
1.5.6.5