[U-Boot] bdi3000 flash cfg files for loading u-boot into hynix HY27UF082G2M NAND?
Wolfgang Denk
wd at denx.de
Mon Jul 25 06:38:15 CEST 2011
Dear "C. A. Fillekes",
In message <CAKsAWy=xbHYr1AaNR4JPKTnkHBDvZddXyTuMOH2kZZ2Ybo3r9w at mail.gmail.com> you wrote:
> For a Numonyx NAND02GR3B2DN6E would be equivalent.
>
> This is in use with an iMX25 (arm926 processor, armv5tel architecture)
The BDI cannot write to NAND. The standard approach is to load U-Boot
to RAM, start it there, and then use U-Boot tools to write the image
to NAND.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Is truth not truth for all?
-- Natira, "For the World is Hollow and I have Touched
the Sky", stardate 5476.4.
More information about the U-Boot
mailing list