[U-Boot] [PATCH] 85xx: enable FDT support for STX SSA board

Wolfgang Denk wd at denx.de
Mon Jul 25 15:15:44 CEST 2011


We also have to shift TEXT_BASE to accomodate for the additional
code size.

Signed-off-by: Wolfgang Denk <wd at denx.de>
Cc: Kumar Gala <galak at kernel.crashing.org>

---
 board/stx/stxssa/stxssa.c |    8 ++++++++
 include/configs/stxssa.h  |    7 ++++++-
 2 files changed, 14 insertions(+), 1 deletions(-)

diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c
index 83ffcd2..c78538d 100644
--- a/board/stx/stxssa/stxssa.c
+++ b/board/stx/stxssa/stxssa.c
@@ -34,6 +34,7 @@
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
 #include <asm/fsl_ddr_sdram.h>
 #include <ioports.h>
 #include <asm/io.h>
@@ -247,6 +248,13 @@ reset_phy(void)
 #endif
 }
 
+#ifdef CONFIG_OF_BOARD_SETUP
+void ft_board_setup (void *blob, bd_t *bd)
+{
+	ft_cpu_setup (blob, bd);
+}
+#endif /* CONFIG_OF_BOARD_SETUP */
+
 int
 board_early_init_f(void)
 {
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index d5dd94f..141da26 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -43,7 +43,7 @@
 #define CONFIG_STXSSA		1	/* Silicon Tx GPPP SSA board specific*/
 #define CONFIG_MPC8560		1
 
-#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+#define	CONFIG_SYS_TEXT_BASE	0xFFF80000
 
 #define CONFIG_PCI			/* PCI ethernet support	*/
 #define CONFIG_TSEC_ENET		/* tsec ethernet support*/
@@ -194,6 +194,11 @@
 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
 /*
  * I2C
  */
-- 
1.7.6



More information about the U-Boot mailing list