[U-Boot] [PATCH V3 0/5] OMAP3 and devkit8000 SPL support

[Simon Schwarz]

V1  Initial SPL support for OMAP3 was based on the old SPL
V2  Introduced major changes. It is based on the OMAP4-SPL patch by Aneesh V
    and the new SPL Framework by Daniel Schwierzeck and Aneesh V
V3  Some small bug fixes and correct placed SOB.

This is based on the following patches:
- New SPL framework
- OMAP4 SPL
Both are already in u-boot-ti repo.

Simon Schwarz (5):
  omap3: Configure RAM bank 0 if in SPL
  omap-common: add nand spl support
  nand spl: add NAND Library to new SPL
  omap3: new SPL structure support
  devkit8000: Add nand-spl support for new SPL

 arch/arm/cpu/armv7/omap-common/spl.c        |   45 ++++++++++++++++++
 arch/arm/cpu/armv7/omap3/board.c            |   36 +++++++++++++-
 arch/arm/cpu/armv7/omap3/lowlevel_init.S    |    5 ++
 arch/arm/cpu/armv7/omap3/sdrc.c             |   30 +++++++++++-
 arch/arm/include/asm/arch-omap3/mem.h       |   36 ++++++++++++++
 arch/arm/include/asm/arch-omap3/sys_proto.h |    1 +
 arch/arm/include/asm/omap_common.h          |    1 +
 board/timll/devkit8000/devkit8000.c         |    2 +-
 doc/README.SPL                              |    2 +
 drivers/mtd/nand/Makefile                   |    6 ++-
 drivers/mtd/nand/omap_gpmc.c                |   68 +++++++++++++++++++++++++++
 include/configs/devkit8000.h                |   46 ++++++++++++++++++
 include/nand.h                              |    2 +
 spl/Makefile                                |    2 +
 14 files changed, 277 insertions(+), 5 deletions(-)

-- 
1.7.4.1