[U-Boot] openrd_ultimate GigEth ports not working
Alex Zeffertt
azeffertt at cambridgesys.com
Tue Jul 26 12:52:37 CEST 2011
On 25 July 2011 18:14, Ralph Metzler <rjkm at metzlerbros.de> wrote:
> Alex Zeffertt writes:
> > and then I burn the .kwb file into the flash using openocd.
> >
> > Unfortunately I cannot get the Gig Eth ports to work in u-boot at the
> > moment. When I run the following at the command prompt the console just
> > hangs and I have to reboot:
> >
> > Marvell>> setenv ipaddr 192.168.1.1
> > Marvell>> ping 192.168.1.30
> > ... board hangs ...
> >
> > Has anybody else seen this issue?
>
> I see something similar with the Seagate Dockstar (also Kirkwood) when
> using dhcp. It also hangs. I did not test ping.
> The 2011.06 snapshot works fine.
>
> -Ralph
>
Thanks Ralph,
I can confirm that the issue is the same with OpenRD Ultimate. I.e.
ethernet is not working in HEAD but it is fine on tag v2011.06.
Alex
More information about the U-Boot
mailing list