[U-Boot] [PATCH] ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible
Michael Jones
michael.jones at matrix-vision.de
Wed Jul 27 14:41:53 CEST 2011
Signed-off-by: Michael Jones <michael.jones at matrix-vision.de>
---
drivers/i2c/omap24xx_i2c.c | 105 ++++++++++++++++++++++----------------------
1 files changed, 53 insertions(+), 52 deletions(-)
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 19e024d..c812001 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -31,8 +31,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define I2C_TIMEOUT 1000
-static void wait_for_bb (void);
-static u16 wait_for_pin (void);
+static void wait_for_bb(void);
+static u16 wait_for_pin(void);
static void flush_fifo(void);
static struct i2c *i2c_base = (struct i2c *)I2C_DEFAULT_BASE;
@@ -40,7 +40,7 @@ static struct i2c *i2c_base = (struct i2c *)I2C_DEFAULT_BASE;
static unsigned int bus_initialized[I2C_BUS_MAX];
static unsigned int current_bus;
-void i2c_init (int speed, int slaveadd)
+void i2c_init(int speed, int slaveadd)
{
int psc, fsscll, fssclh;
int hsscll = 0, hssclh = 0;
@@ -107,9 +107,9 @@ void i2c_init (int speed, int slaveadd)
sclh = (unsigned int)fssclh;
}
- if (readw (&i2c_base->con) & I2C_CON_EN) {
- writew (0, &i2c_base->con);
- udelay (50000);
+ if (readw(&i2c_base->con) & I2C_CON_EN) {
+ writew(0, &i2c_base->con);
+ udelay(50000);
}
writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
@@ -130,35 +130,36 @@ void i2c_init (int speed, int slaveadd)
writew(sclh, &i2c_base->sclh);
/* own address */
- writew (slaveadd, &i2c_base->oa);
- writew (I2C_CON_EN, &i2c_base->con);
+ writew(slaveadd, &i2c_base->oa);
+ writew(I2C_CON_EN, &i2c_base->con);
/* have to enable intrrupts or OMAP i2c module doesn't work */
- writew (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
+ writew(I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
- udelay (1000);
+ udelay(1000);
flush_fifo();
- writew (0xFFFF, &i2c_base->stat);
- writew (0, &i2c_base->cnt);
+ writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
if (gd->flags & GD_FLG_RELOC)
bus_initialized[current_bus] = 1;
}
-static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
+static int i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
{
int i2c_error = 0;
u16 status;
/* wait until bus not busy */
- wait_for_bb ();
+ wait_for_bb();
/* one byte only */
- writew (1, &i2c_base->cnt);
+ writew(1, &i2c_base->cnt);
/* set slave address */
- writew (devaddr, &i2c_base->sa);
+ writew(devaddr, &i2c_base->sa);
/* no stop bit needed here */
- writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, &i2c_base->con);
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
+ I2C_CON_TRX, &i2c_base->con);
/* send register offset */
while (1) {
@@ -196,7 +197,7 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
}
if (status & I2C_STAT_RRDY) {
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX)
+ defined(CONFIG_OMAP44XX)
*value = readb(&i2c_base->data);
#else
*value = readw(&i2c_base->data);
@@ -211,8 +212,8 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
read_exit:
flush_fifo();
- writew (0xFFFF, &i2c_base->stat);
- writew (0, &i2c_base->cnt);
+ writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
return i2c_error;
}
@@ -222,38 +223,37 @@ static void flush_fifo(void)
/* note: if you try and read data when its not there or ready
* you get a bus error
*/
- while(1){
+ while (1) {
stat = readw(&i2c_base->stat);
- if(stat == I2C_STAT_RRDY){
+ if (stat == I2C_STAT_RRDY) {
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX)
+ defined(CONFIG_OMAP44XX)
readb(&i2c_base->data);
#else
readw(&i2c_base->data);
#endif
- writew(I2C_STAT_RRDY,&i2c_base->stat);
+ writew(I2C_STAT_RRDY, &i2c_base->stat);
udelay(1000);
- }else
+ } else
break;
}
}
-int i2c_probe (uchar chip)
+int i2c_probe(uchar chip)
{
u16 status;
int res = 1; /* default = fail */
- if (chip == readw (&i2c_base->oa)) {
+ if (chip == readw(&i2c_base->oa))
return res;
- }
/* wait until bus not busy */
- wait_for_bb ();
+ wait_for_bb();
/* try to write one byte */
- writew (1, &i2c_base->cnt);
+ writew(1, &i2c_base->cnt);
/* set slave address */
- writew (chip, &i2c_base->sa);
+ writew(chip, &i2c_base->sa);
/* stop bit needed here */
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
I2C_CON_STP, &i2c_base->con);
@@ -268,29 +268,30 @@ int i2c_probe (uchar chip)
writew(0, &i2c_base->con);
flush_fifo();
- writew (0, &i2c_base->cnt); /* don't allow any more data in...we don't want it.*/
+ /* don't allow any more data in... we don't want it. */
+ writew(0, &i2c_base->cnt);
writew(0xFFFF, &i2c_base->stat);
return res;
}
-int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
int i;
if (alen > 1) {
- printf ("I2C read: addr len %d not supported\n", alen);
+ printf("I2C read: addr len %d not supported\n", alen);
return 1;
}
if (addr + len > 256) {
- printf ("I2C read: address out of range\n");
+ printf("I2C read: address out of range\n");
return 1;
}
for (i = 0; i < len; i++) {
- if (i2c_read_byte (chip, addr + i, &buffer[i])) {
- printf ("I2C read: I/O error\n");
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ if (i2c_read_byte(chip, addr + i, &buffer[i])) {
+ printf("I2C read: I/O error\n");
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 1;
}
}
@@ -298,7 +299,7 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
return 0;
}
-int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
int i;
u16 status;
@@ -373,40 +374,40 @@ write_exit:
return i2c_error;
}
-static void wait_for_bb (void)
+static void wait_for_bb(void)
{
int timeout = I2C_TIMEOUT;
u16 stat;
writew(0xFFFF, &i2c_base->stat); /* clear current interrupts...*/
- while ((stat = readw (&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
- writew (stat, &i2c_base->stat);
+ while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
+ writew(stat, &i2c_base->stat);
udelay(1000);
}
if (timeout <= 0) {
- printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
- readw (&i2c_base->stat));
+ printf("timed out in wait_for_bb: I2C_STAT=%x\n",
+ readw(&i2c_base->stat));
}
writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/
}
-static u16 wait_for_pin (void)
+static u16 wait_for_pin(void)
{
u16 status;
int timeout = I2C_TIMEOUT;
do {
- udelay (1000);
- status = readw (&i2c_base->stat);
- } while ( !(status &
+ udelay(1000);
+ status = readw(&i2c_base->stat);
+ } while (!(status &
(I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
I2C_STAT_AL)) && timeout--);
if (timeout <= 0) {
- printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
- readw (&i2c_base->stat));
+ printf("timed out in wait_for_pin: I2C_STAT=%x\n",
+ readw(&i2c_base->stat));
writew(0xFFFF, &i2c_base->stat);
status = 0;
}
@@ -421,7 +422,7 @@ int i2c_set_bus_num(unsigned int bus)
return -1;
}
-#if I2C_BUS_MAX==3
+#if I2C_BUS_MAX == 3
if (bus == 2)
i2c_base = (struct i2c *)I2C_BASE3;
else
@@ -433,7 +434,7 @@ int i2c_set_bus_num(unsigned int bus)
current_bus = bus;
- if(!bus_initialized[current_bus])
+ if (!bus_initialized[current_bus])
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return 0;
--
1.7.5.4
MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner, Erhard Meier
More information about the U-Boot
mailing list