[U-Boot] [PATCH V6 2/5] omap-common: add nand spl support

Aneesh V aneesh at ti.com
Thu Jul 28 16:16:25 CEST 2011


Hi Simon,

On Thursday 28 July 2011 02:08 PM, Simon Schwarz wrote:
> Add NAND support for the new SPL structure.
>
> Signed-off-by: Simon Schwarz<simonschwarzcor at gmail.com>
> ---
> This patch didn't exist before V2!
>
> V2 changes:
> ADD Some define-barriers for OMAP3 to only use NAND
> ADD nand_load_image() - inits the OMAP gpmc, loads the images - parses the
> 	header
> CHG cosmetic
> ADD do_reset() implementation for omap-common spl
> ADD nand_copy_image to nand.h
> ADD CPP barriers for mmc and nand support. The parts depending on library
> 	support are only compiled if the respective library is included.
>
> V3 changes:
> ADD Comment why setup_clocks_for_console() isn't called for OMAP3
> CHG cosmetic (deleted empty line)
> CHG rename of NAND_MODE_HW to NAND_MODE_HW_ECC
> DEL NAND_MODE_SW. Not used.
>
> V4 changes:
> CHG cosmetic - style problems
>
> V5 changes:
> CHG renamed nand_copy_image to nand_spl_load_image
> CHG offs paramter of nand_spl_load_image is of type loff_t now
>
> V6 changes:
> ADD call to nand_deselect after loading the images
> ADD nand_deselect to nand.h
>
> Transition from V1 to V2 also includes that this patch is now based on
> 	- the new SPL layout by Aneesh V and Daniel Schwierzeck
>    	- the OMAP4 SPL patches by Aneesh V
> ---
>   arch/arm/cpu/armv7/omap-common/spl.c |   47 ++++++++++++++++++++++++++++++++++
>   arch/arm/include/asm/omap_common.h   |    1 +
>   include/nand.h                       |    3 ++
>   3 files changed, 51 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
> index d177652..7ec5c7c 100644
> --- a/arch/arm/cpu/armv7/omap-common/spl.c
> +++ b/arch/arm/cpu/armv7/omap-common/spl.c
> @@ -26,6 +26,7 @@
>   #include<asm/u-boot.h>
>   #include<asm/utils.h>
>   #include<asm/arch/sys_proto.h>
> +#include<nand.h>
>   #include<mmc.h>
>   #include<fat.h>
>   #include<timestamp_autogenerated.h>
> @@ -107,6 +108,7 @@ static void parse_image_header(const struct image_header *header)
>   	}
>   }
>
> +#ifdef CONFIG_SPL_MMC_SUPPORT
>   static void mmc_load_image_raw(struct mmc *mmc)
>   {
>   	u32 image_size_sectors, err;
> @@ -140,7 +142,9 @@ end:
>   		hang();
>   	}
>   }
> +#endif /* CONFIG_SPL_MMC_SUPPORT */
>
> +#ifdef CONFIG_SPL_MMC_SUPPORT
>   static void mmc_load_image_fat(struct mmc *mmc)
>   {
>   	s32 err;
> @@ -173,7 +177,9 @@ end:
>   		hang();
>   	}
>   }
> +#endif /* CONFIG_SPL_MMC_SUPPORT */
>
> +#ifdef CONFIG_SPL_MMC_SUPPORT
>   static void mmc_load_image(void)
>   {
>   	struct mmc *mmc;
> @@ -206,6 +212,28 @@ static void mmc_load_image(void)
>   		hang();
>   	}
>   }
> +#endif /* CONFIG_SPL_MMC_SUPPORT */
> +
> +#ifdef CONFIG_SPL_NAND_SUPPORT
> +static void nand_load_image(void)
> +{
> +	gpmc_init();
> +	nand_init();
> +	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
> +		CONFIG_SYS_NAND_U_BOOT_SIZE,
> +		(uchar *)CONFIG_SYS_NAND_U_BOOT_DST);

Guess CONFIG_SYS_NAND_U_BOOT_DST is same as CONFIG_SYS_TEXT_BASE. Why
define a new flag then?

> +#ifdef CONFIG_NAND_ENV_DST
> +	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
> +		(uchar *)CONFIG_NAND_ENV_DST);
> +#ifdef CONFIG_ENV_OFFSET_REDUND
> +	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
> +		(uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
> +#endif
> +#endif
> +	nand_deselect();
> +	parse_image_header((struct image_header *)CONFIG_SYS_NAND_U_BOOT_DST);

I think you are assuming the image type and size here. Why not do this 
as it is done for MMC. That is, read just 1 sector, parse the buffer,
find the size of the image and read only that much subsequently. You 
will have to then use u-boot.img instead of u-boot.bin as the payload.

Maybe you should clone arch/arm/cpu/armv7/omap4/config.mk in omap3
folder to get MLO and u-boot.img targets.

best regards,
Aneesh


More information about the U-Boot mailing list